材料期刊网

AN INCREMENTAL METHOD OF X-RAY DIFFRACTION QUANTITATIVE PHASE ANALYSIS OF SAMPLES CONTAINING AMORPHOUS MATERIAL

G. Chu(Department of Applied Chemistry Fushun Petroleum Institute , Fushun 113001 , China)

金属学报(英文版)

A new method for quantitative X-ray diffraction phase analysis of a powder misture has been developed according to Popovic's doping method. The weight fraction of amorphous material in the analysed sample is obtained. For a multicomponent system in which (n-2) pure phases are added into an n-phase compnent sample and theweight fractions of all n phases can be determined by the method. The test results of confirmation agree well with the theory.

关键词: X-ray diffraction , null , null , null

Brief Outline of the Metallurgy Department of Kunming Institute of Technology

LIU Chunpeng Kunming Institute of Technology , Kunming 650093 , China.

材料科学技术（英文）

关键词:

The effect of grinding on the sintering of raw petroleum coke

Carbon

Preparation of dense carbon materials without use of any binder was attempted, effect of grinding treatment on the characteristics of raw petroleum needle coke and on the properties of the sintered carbon compacts was investigated, and the sintering mechanizm of the coke after grinding was discussed. It was found that the coke particle size and crystalline size was decreased and the specific surface area of the coke was increased with grinding, and the influence was obvious up to 20 hours grinding treatment. The interlayer spacing of the coke after graphitization at 2773 K was gradually increased and the a-axis constant was marginally reduced with the grinding time. Results from the sintering experiment show that carbon materials can be sintered from the ground coke, and the density and flexural strength of the sintering compacts reached stable values of 1.8 g cm(-3) and about 70 MPa, respectively, after 20 hours grinding of the coke. The sintering ability of the coke after grinding was considered to result from the increase of surface energy, lattice distortion energy and fraction of volatile matters of the coke, which were induced by grinding treatment. (C) 1997 Elsevier Science Ltd

关键词: needle coke;semicoke;baking;mechanical properties;particle size;graphite

In situ observation of G. P. zones in an Al-Zn-Mg alloy under irradiation of electron beam

Journal of Materials Science Letters

关键词:

Guangzhou Institute of Energy Conversion,The Chinese Academy of Sciences,Guangzhou 510070,China

B.W. Wang , H. Shen

金属学报(英文版)

Ni-Cr System solar selective thin solid films were prepared by d.c. magnetron reactivesputtering under the atmosphere of O2 and N2. Ni-Cr alloy was chosen as targetmaterial and copper sheets as substrate. Using SEM, Spectrophotometer and Talystepto analyze the relations between the selective characteristic and the structure, theformation and the thickness of the thin films. The aim is to obtain good solar selectivethin films with high absorptance and low emittance, which is applied to flat plate solarheat collectors.

关键词: solar selective thin film , null , null , null

Metal-Free Heterogeneous Catalysis for Sustainable Chemistry

Chemsuschem

The current established catalytic processes used in chemical industries use metals, in many cases precious metals, or metal oxides as catalysts. These are often energy-consuming and not highly selective, wasting resources and producing greenhouse gases. Metal-free heterogeneous catalysis using carbon or carbon nitride is an interesting alternative to some current industrialized chemical processes. Carbon and carbon nitride combine environmental acceptability with inexhaustible resources and allow a favorable management of energy with good thermal conductivity Owing to lower reaction temperatures and increased selectivity, these catalysts could be candidates for green chemistry with low emission and an efficient use of the chemical feedstock This Review highlights some recent promising activities and developments in heterogeneous catalysis using only carbon and carbon nitride as catalysts The state-of-the-art and future challenges of metal-free heterogeneous catalysis are also discussed.

关键词: carbon;catalyst;heterogeneous catalysis;selectivity;sustainable;chemistry;graphitic carbon nitride;modified activated carbon;nanofiber/graphite-felt composite;ordered mesoporous carbons;oxygen;reduction reaction;nitrogen-doped graphite;fuel cell cathode;onion-like carbon;oxidative dehydrogenation;hydrogen-production

Fushun Steel Plant

TANG Rongde Deputy-chief engineer. Fushun Steel Plant , Liaoning , China.

材料科学技术（英文）

关键词:

SERS and Quantum Chemistry Studies of Adsorption of Thiourea and Ethylthiourea on Silver Electrode

Acta Physico-Chimica Sinica

Adsorption of thiourea (TU) and ethylthiourea( ETU) on roughened silver electrode was investigated using in situ surf. enhanced Raman spectroscopy(SERS) Using quantum chemistry and HSAB theories, the influences of electrode potential and the different substituent groups on SERS were disc i. TU is chemisorbed perpendicularly by Ag-S bond on silver at E = -0.3 V and adsorption of TU turns into a parallel orientation at E = -0.9 V. ETU is always chemisorbed at an angle from Ag. The adsorption of ETU is through and C=C and C=O groups at E = -0.3 V, and mainly through C=C at E = -0.9V.

关键词: Surface enhanced Raman spectroscopy;Adsorption;Quantum chemistry;Thiourea;Inhibitor

LOCAL CHEMISTRY AND THE COHESIVE STRENGTH OF GRAIN BOUNDARIES IN Ni_3Al

Shanthi Subramanian , David Muller , John Silcox and Stephen L.Sass (Department of Materials Science and Engineering and Department of Applied and Engineering Physics , Cornell University , Ithaca. NY 14853)

金属学报(英文版)

Local chemistry plays an important role in determining the cohesive strength of grain boundaries in Ni3Al. Doping with B increases the room temperature ductility and changes the fracture mode from intergranular to transgranular, while doping with Zr increases the ductility but leaves the fracture mode predominantly intergranular.Electron Energy Loss Spectroscopy (EELS) and Energy Dispersive X-ray Spectroscopy (EDS) were used to probe the changes in local bonding (and hence the cohesive strength) produced by changes in local chemistry at large angle boundaries in Ni3Al.In addition , small angle tilt boundaries were studied to correlate structure with Nienrichment at the interface. B segregation to Ni-rich grain boundaries was shown to make the bonding similar to that of the bulk, thereby increasing their fracture resistance. Ni-enrichment does not occur in the presence of Zr segregation to grain boundaries. Ni-enrichment to antiphase boundaries (APB) in small angle tilt boundaries lowers the APB energy by reducing the number of high energy Al-Al interactions across the interface. Ni-enrichment to large angle boundaries is expected to produce a similar effect on energy.

关键词: : grain boundary chemistry , null , null , null

Effects of Applied Stresses on Martensite Transformation in AISI4340 Steel

ZHAO Hongzhuang , Seokjae LEE , Youngkook LEE , LIU Xianghua , WANG Guodong

钢铁研究学报(英文版)

This study aims at the experimental analysis of the transformation induced plasticity (TRIP) phenomenon. Experiments are conducted in which martensite is allowed to grow under the influence of a series of externally applied stresses. The magnitude of the applied stresses is less than 67% of the yield strength of austenite σγ(Ts). Since there is no obvious difference between the transformation plasticity under tension and the compression for the lower applied stresses, only compressive stresses are applied. The results confirm that the transformation plasticity is proportional to the applied stress if the latter does not exceed 67% of σγ(Ts). The TRIPstrain, the kinetics, and their dependence on the applied stresses are studied. The comparison between calculated results and experimental results shows that the model accurately describes the phenomenon.

关键词: applied stress;TRIP;martensite transformation;lowalloy steel