G.J. Xu
,
D.H. Li
,
J.C. He
金属学报(英文版)
In order to know the distribution of magnetic field in a novel flow control of mold(NFC Mold) and to provide the experimental data for the electromagnetic structuredesign and the analysis of flow control in continuous casting mold, the magnetic fieldin a NFC Mold were measured by Tesla meter of Model CT-3. The method of vectorsynthesis was adopted in the measurement of magnetic fields. The results showed thatthe magnetic field in the NFC Mold was composed of two main magnetic areas thatwere symmetrical. Although there was leaking magnetic flux between the lower surfaceof the upper pole and the upper surface of the lower pole on the sides, it was restrainedby the main magnetic fields effectively. Therefore the NFC Mold was more preferablysatisfied to be used in controlling the molten steel flow in continuous casting mold.
关键词:
continuous casting
,
null
,
null
,
null
崔岩
,
鲁二敬
,
吴晓明
,
张艳辉
,
吴昊
机械工程材料
通过拉伸、冲击、弯曲、硬度和金相等试验对S355J2G3低合金钢MAG焊焊接接头的力学性能与显微组织进行了研究。结果表明：采用G383G3Sil焊丝对S355J2G3低合金钢进行焊接时，可获得拉伸、弯曲和冲击性能均良好的焊接接头；接头硬度的分布较均匀，最高不大于380HV；焊缝组织为沿柱状晶晶界析出的块状先共析铁素体，晶内为细小密集的针状铁素体和少量珠光体；热影响区组织主要为先共析铁素体、针状铁素体、珠光体和少量的粒状贝氏体；母材为均匀细小分布的铁素体和珠光体。
关键词:
S355J2G3低合金钢
,
焊接接头
,
力学性能
,
显微组织
Doris Smith
,
Ken Lynam
环境化学
本文中使用安捷伦SPEC C18AR固相萃取膜盘成功萃取了水中的有机氯农药残留和除草剂.使用双柱配置的GC/μECD系统进行检测,安捷伦J&W DB-35ms UI超高惰性色谱柱作为分析柱,DB-XLB色谱柱为确认柱.该方法为浓度接近或低于最大污染限值的含氯有机物提供了高度灵敏的分析方法.根据预估的分析物萃取浓度,方法使用的校准范围为1-100 ng· mL-1.分别对0.01 μg·L-1的加标水样和一个自来水水样进行了萃取和分析,结果证明可满足水中的有机氯农药残留和除草剂的测定.
关键词:
有机氯农药
,
除草剂
,
色谱柱
Physical Review B
The Hamiltonian for a four-sublattice Heisenberg ferrimagnet or ferromagnet with different exchange constants (J(ab) = J(cd) not equal J(bc) = J(da)) was established. An extended Bogoliubov transformation was developed by solving an equation group, consisting of 20 equations and 20 unknowns. The procedure for solving the equation group was carried out by introducing a simple way of reducing the numbers of the equations and the unknowns. The spin-wave spectra in the present system have been determined by performing the standard Holstein-Primakoff transformation and the Bogoliubov one. It has been found that the spin-wave spectra of the present system depend on the exchange constants and that the degeneracy of the spin-wave spectra remains. The results for a special case (J(ab) = J(bc)) i.e., an antiferromagnet are discussed briefly. The spin-wave spectra of the four-sublattice Heisenberg antiferromagnet are found to be degenerative also and they are linear in k for small k.
关键词:
model
Y.G. Cao
,
X.Y. Sun
金属学报(英文版)
J-integral and crack opening displacement δ(COD) were important parameters for characterization of fractures in engineering materials. The relationship between J-integral and COD has been investigated for a long time and was enerally represented as J = m σyδ, where σy is the yield strength and m is a function of specimen geometry and material properties. To determine the value of m, extensive studies and experiments have been performed. The method that used the fracture-surface topography analysis (FRASTA) for determining J-integral from fracture surfaces of materials was introduced. On the basis of the relationship between COD and fracture surface average profile, the relationship between J-integral and COD was deduced and compared with the generally used equation. The method was experimentally confirmed to be able to provide a new way to determine the relationship between J-integral and COD.
关键词:
FRASTA
,
null
,
null
Optical Materials
The perturbation formulas of the EPR g factors g,, g and g. for a 4f(11) 1 ion in orthorhombic symmetry are established. In these formulas, the contributions to the g factors arising from the second-order perturbation terms and the admixture of various states are taken into account. The above formulas are applied to the orthorhombic Er3+ centers in YAG, YGG and LuGG garnets. By analyzing their g factors, we find that the polar angles theta(j)(') of the impurity-ligand bonds related to the Z axis of the crystals in these Er3+ centers are smaller than the host angles theta(j) in pure crystals, whereas the azimuthal angles, related to the X axis in the impurity centers are larger than the corresponding phi(j) in the hosts. The g factors and their anisotropies Delta g [= g(z) - (g(x) + g(y))/2] and delta g (= g(x) - g(y)) for Er3+ in the garnets based on the above local structural parameters are in good agreement with the observed values. In addition, the angular distortions Delta theta (= theta(j)(') - theta(j)) or Delta phi (= phi(j)(') - phi(j)) obtained by analyzing the EPR data in this work are different from Delta theta(2), or Delta phi(2) (for only the second set of ligands, i.e., j = 2) based on the superposition model crystal-field analysis in the previous work. The validity of the results is discussed. (c) 2004 Elsevier B.V. All rights reserved.
关键词:
electron paramagnetic resonance (EPR);defect structure;crystal-field;and spin hamiltonians;Er3+;garnets
null
,
null
金属学报
在工程上,经常由于应力腐蚀开裂和氢脆引起中强度钢结构件发生滞后破坏。这类脆断往往从结构件中预先存在的疲劳或焊接裂纹处开始,因此,运用传统的光滑试样的检验方法不能反映这类破坏的特点。 本文将弹塑性断裂力学中的J积分概念用于滞后破坏的研究,提出用带预制疲劳裂纹的悬臂弯曲试样测定J积分的临界值J_(Ic)和应力腐蚀开裂阈值J_(Iscc)的方法。测定了40CrNiMo钢的J_(Ic)值及其在硫化氢水溶液中的J_(Iscc)值。通过和三点弯曲方法测定的J_(Ic)值的对比,以及和满足线弹性条件时直接测定的应力强度因子K_I值的对比,说明这种方法的可靠性。最后,对悬臂弯曲方法的特点进行了讨论。
关键词:
