LI Wei-gang
,
GUO Zhao-hui
,
YI Jian
,
LIU Xiang-hua
钢铁研究学报(英文版)
An optimization solution to roll shifting strategy for alternately rolling campaign is presented. All the strips in a rolling campaign are divided into narrow strips and wide ones, and shifting position of narrow strips is obtained by the recursive method, and then shifting position of wide strips is optimized by NSGA-II which is a multi-objective genetic algorithm. For wide strips, a multi-objective optimization model of roll shifting strategy is proposed, which takes 3 wear contour factors including edge smoothness, body smoothness and edge drop as optimization objectives. The Pareto optimal front of roll shifting strategy can be gained quickly by NSGA-II, which suggests a series of alternative solutions to roll shifting strategy. Analysis shows that the conflict exists among the 3 objectives. The final optimal solution is selected from the Pareto optimal solutions by the weighted-sum decision-making method. Industrial production proves the validity of the solution, and it can improve strip profile of alternately rolling, reduce strip edge wave, and extend the rolling miles of rolling campaigns.
关键词:
hot strip mill
,
alternately rolling
,
work roll shifting
,
NSGA-II
,
pareto optimal solution
中国腐蚀与防护学报
N。1Atmospheric Corrosivlty for Steels………………………………………………… .LIANG Caideng HO[I i。-tat（6）Caustic Stress Corrosion Cr。king of Alloy 800 Part 2.The Effect of Thiosul执e……………………………………… KONG De-sheng YANG Wu ZHAO Guo-zheng HUANG De.ltL。ZHANG Yu。。he CHEN She。g-bac（13）SERS slid E16CttOCh6iniC81 Stlldy Of Illhibit1Oli M6ch＆tllsth Of ThlollY68 Oil ITOll ID H....
关键词:
周萧明
,
胡更开
复合材料学报
doi:10.3321/j.issn:1000-3851.2004.06.026
提出了预测复合材料非线性电位移和电场强度关系的一种解析方法,该方法基于各向材料的割线介电常数,将非线性问题转化成一系列线性问题来求解.该方法适用于任意各向异性复合材料和组分材料的非线性性质,而常用的Stroud和Hui的模型只适用于各向同性复合材料和组分材料的弱线性.证明了本文方法具有Ponte Castaneda提出的变分结构.计算结果表明,当基体非线性较小时,本文模型的预测与Stroud和Hui的模型一致,但当基体非线性系数增大时,本文模型能给出合理的预测结果,而Stroud和Hui的模型则会超出基体和夹杂的性能范围.
关键词:
复合材料
,
介电常数
,
非线性
,
割线方法
Europhysics Letters
Noncollinear magnetic investigations of the ground state in PrFeAsO have been performed by the density-functional theory. We calculated the total energy and made structure optimization, and the electronic density of states of PrFeAsO was analyzed. There are three different magnetic structures in PrFeAsO defined by experiments. Based on these magnetic structures, we studied four collinear and four noncollinear cases. The ground state is found to take the ordering proposed by Zhao, in which the FeAs plane is of stripe antiferromagnetism and Pr spins are perpendicular to Fe spins. The electronic density of states indicates that for PrFeAsO the increase of the electron Coulomb interaction leads to a decrease in conductivity. Copyright (C) EPLA, 2011
关键词:
high-temperature superconductivity;phase-diagram;oxypnictides;instability
刘建国
,
安振涛
,
张倩
,
杜仕国
,
姚凯
,
王金
材料导报
doi:10.11896/j.issn.1005-023X.2017.04.030
为评估氧化剂硝酸羟胺的热稳定性,使用标准液体铝皿于3 K/min、4 K/min、5 K/min加热速率下进行热分析.借助非等温DSC曲线的参数值,应用Kissinger法和Ozawa法求得热分解反应的表观活化能和指前因子,根据Zhang-Hu-Xie-Li公式、Hu-Yang-Liang-Xie公式、Hu-Zhao-Gao公式以及Zhao-Hu-Gao公式,计算硝酸羟胺的自加速分解温度和热爆炸临界温度,并对热分解机理函数进行了研究.设计了7条热分解反应路径,采用密度泛函理论B3LYP/6-311++G(d,p)方法对硝酸羟胺的热分解进行了动力学和热力学计算.计算结果表明,硝酸羟胺热分解的自加速分解温度TsADT=370.05 K,热爆炸临界温度Te0=388.68K,Tbp0=397.54 K,热分解最可几机理函数的微分形式为f(a) =17×(1-α)18/17.硝酸羟胺热分解各路径中,动力学优先支持路径Path 6、Path 5、Path 4和Path 1生成NO和NO2,其次是Path 2、Path 7和Path 3生成N2和N2O.温度在373 K以下时,Path 1'反应无法自发进行,硝酸羟胺无法进行自发的热分解.从热力学的角度来看,硝酸羟胺在370.05K以下储存是安全的.
关键词:
硝酸羟胺
,
热分析
,
热稳定性
,
热分解机理
,
密度泛函理论
李凤娟
,
吕国光
金属世界
doi:10.3969/j.issn.1000-6826.2014.04.14
通过对烧结配料所需原料及对冷烧结矿成品检验采制样方法的分析，找出影响检验结果真实性的因素，采取有效的改进措施，使本钢原料厂一次配料、本钢炼铁厂265 m2烧结二次配料及265 m2烧结系统各项稳定率有了很大的提高，烧结矿实物质量和各项技术质量指标有了很大的进步，保证了高炉的稳定顺行。
提高本钢265 m2冷烧结矿及原料检验代表性的实践
Practice of Improving the 265 m2 Cold Sinter and Raw Material Inspection Representative
供稿|
李凤娟,吕国光/
LI Feng-juan, LV Guo-guang
DOI：10.3969/j.issn.1000-6826.2014.04.14
导读内容
本钢炼铁厂265 m2烧结机生产所需要的含铁原料比较复杂，一次配料料种较多，且烧结含铁原料是由本钢原料厂二车间供料，原料质量的不稳定，会影响烧结矿质量的提高和新一号高炉的强化及高炉技术指标的改善。本钢质量管理中心驻冷烧检查站加强了对烧结配料所需原料及对冷烧结矿成品检验采制样代表性的研究，采取了一些改进措施，达到了良好的效果。含铁料成分稳定率、烧结矿各项质量和技术指标在稳步地提高。下面，对本钢质量管理中心驻冷烧检查站就提高采样及检验过程的准确性所采取的措施和办法进行说明。
烧结矿采样是半自动采样，每两小时采样一次，作为一个批次，来代表整个2h烧结矿的成份。
关键词:
