材料期刊网

Hot Deformation Behavior and Flow Stress Prediction of Ultra Purified 17％ Cr Ferritic Stainless Steel Stabilized with Nb and Ti

Fei GAO , Fu-xiao YU , Hai-tao LIU , Zhen-yu LIU

钢铁研究

关键词:

CSD-La3TaO7薄膜外延生长行为

王耀 , 李成山 , 于泽铭 , 冯建情 , 金利华 , 王辉 , 张平祥

稀有金属

研究CSD技术制备La3TaO7 (LTO)缓冲层过程中前驱液的热分解行为以及热处理工艺对薄膜取向生长的影响,通过选取恰当的LTO前驱液以及快速升温热处理的方法最终获得了良好c轴织构的LTO薄膜.

关键词: 涂层导体 , 缓冲层 , 化学溶液沉积

Bi3+,Eu3+,Tb3+掺杂Lu3TaO7的发光性能研究

刘文鹏 , 张庆礼 , 杨华军 , 周鹏宇 , 孙敦陆 , 高进云 , 谷长江 , 罗建乔 , 王迪 , 殷绍唐

量子电子学报 doi:10.3969/j.issn.1007-5461.2011.02.018

采用固相反应法制备了Bi3+、Eu3+、Tb3+掺杂的Lu3TaO7.测量了样品的X射线衍射谱、激发和发射光谱及荧光衰减曲线.三种离子掺杂的Lu3TaO7均呈现出强的荧光发射,其中Bi3+具有峰位在431 nm处的一强发射宽带,衰减寿命为16.8μs,Eu3+、Tb3+则表现出稀土离子的特征锐发射峰,衰减寿命分别为1.26 ms和1.20 ms.因此,它们均是具有潜在应用前景的重闪烁体材料.

关键词: 材料 , 闪烁体 , Lu3TaO7 , 发光

Interfacial diffusion in Cu with a gradient nanostructured surface layer

Acta Materialia

A graded microstructure was produced in the surface layer of a pure Cu sample by means of surface mechanical attrition treatment (SMAT) [Wang K, Tao NR, Liu G, Lu J, Lu K. Acta Mater 2006;54:5281.]. The diffusion behavior of (63)Ni in such a surface layer was investigated by the radiotracer technique at temperatures <438 K. It is shown that the effective diffusivity in the top 10 mu m surface layer is more than 2 orders of magnitude higher than that along conventional high-angle grain boundaries (HAGB) in Cu of similar purity. The diffusion rate increases gradually with increasing depth up to 30-50 mu m, and then decreases with further increasing depth. The enhanced diffusivities reveal higher-energy states of various interfaces in the SMAT surface layer. The excess free energy of HAGB in this layer is estimated to be similar to 30% higher than that of conventional grain boundaries. An apparent retardation of the effective diffusion rate in the top 25 mu m surface layer is induced by tracer leakage into numerous twin-boundary-like interfaces, while the gradual decrease in interface excess free energy correlates with the observed decrease in diffusivity in the subsurface layer at depths exceeding 50 mu m. (C) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

关键词: Nanostructured material;Surface mechanical attrition treatment;Diffusion;Grain boundaries;Twin boundaries;grain-boundary diffusion;mechanical attrition treatment;severe;plastic-deformation;nanocrystalline copper;self-diffusion;nickel;alloys;bulk;temperatures;segregation

一种基于锡锑氧化物的透明PN结及整流特性

季振国 , 周荣福 , 毛启楠 , 霍丽娟 , 曹虹

无机材料学报 doi:10.3724/SP.J.1077.2009.09217

利用反应磁控溅射法制备了半导体锡锑氧化物薄膜 (TAO). 根据霍尔效应测试结果，当Sn/Sb 原子比处于0.22~0.33范围内时，TAO薄膜是p型导电的，在此范围之外，TAO薄膜是n型导电的. 光学带隙测量结果表明,不同Sn/Sb比的TAO薄膜的禁带宽度基本相同(~3.9eV).构造了一个全透明的PN结，其中n区为Sn/Sb原子比为0.5的TAO薄膜， p区为Sn/Sb原子比为0.33的TAO薄膜.n区TAO的电极用铟锡氧化物（ITO），p区TAO的电极用Cu薄膜.实验结果表明，由于两种导电类型的TAO薄膜具有相同的禁带宽度，上述透明PN结构具有典型的准同质PN结的整流特性.

关键词: 透明半导体薄膜 , antimony-tin oxide , PN junction

一种基于锡锑氧化物的透明PN结及整流特性

季振国 , 周荣福 , 毛启楠 , 霍丽娟 , 曹虹

无机材料学报 doi:10.3724/SP.J.1077.2009.09217

利用反应磁控溅射法制备了半导体锡锑氧化物薄膜 (TAO). 根据霍尔效应测试结果,当Sn/Sb 原子比处于0.22~0.33范围内时,TAO薄膜是p型导电的,在此范围之外,TAO薄膜是n型导电的. 光学带隙测量结果表明,不同Sn/Sb比的TAO薄膜的禁带宽度基本相同(～3.9eV).构造了一个全透明的PN结,其中n区为Sn/Sb原子比为0.5的TAO薄膜, p区为Sn/Sb原子比为0.33的TAO薄膜.n区TAO的电极用铟锡氧化物(ITO),p区TAO的电极用Cu薄膜.实验结果表明,由于两种导电类型的TAO薄膜具有相同的禁带宽度,上述透明PN结构具有典型的准同质PN结的整流特性.

关键词: 透明半导体薄膜 , 锡锑氧化物 , PN结

复合材料层合壳体的三维本构方程

杨宜谦

玻璃钢/复合材料 doi:10.3969/j.issn.1003-0999.1999.04.002

本文推导出了复合材料层合壳体的三维本构方程,修正了Reddy和Liu论文中的错误.

关键词: 复合材料 , 壳体 , 三维本构方程

Improved Nonlinear Equation Method for Numerical Prediction of Jominy EndQuench Curves

SONG Yuepeng , LIU Guoquan , LIU Shengxin , LIU Jiantao , FENG Chengming

钢铁研究学报(英文版)

Without considering the effects of alloying interaction on the Jominy endquench curves, the prediction results obtained by YU Baihai′s nonlinear equation method for multialloying steels were different from those experimental ones reported in literature. Some alloying elements have marked influence on Jominy endquench curves of steels. An improved mathematical model for simulating the Jominy endquench curves is proposed by introducing a parameter named alloying interactions equivalent (Le). With the improved model, the Jominy endquench curves of steels so obtained agree very well with the experimental ones.

关键词: Jominy endquench curve;nonlinear equation method;alloying interaction parameter;computer simulation

聚醛/蒙脱土纳米复合材料非等温结晶动力学研究

徐卫兵 , 戈明亮 , 何平笙

应用化学 doi:10.3969/j.issn.1000-0518.2001.09.011

用熔融插层法制备聚甲醛/蒙脱土纳米复合材料,用X射线衍射研究聚甲醛及复合材料的微观结构,表明复合材料是纳米复合材料.用DSC法研究其非等温结晶行为,对所得数据分别用Jeziorny法、Ozawa法和Liu法进行处理.结果表明,Jeziorny法和Liu法处理非等温结晶过程比较理想.聚甲醛及聚甲醛/有机蒙脱土纳米复合材料的结晶活化能分别为334.6和196.9 kJ/mol,说明有机蒙脱土的加入,降低了聚甲醛的结晶活化能,且t1/z缩短,起到了异相成核的作用.

关键词: 聚甲醛 , 蒙脱土 , 纳米复合材料 , 非等温结晶动力学

聚丙烯/凹凸棒土纳米复合材料的非等温结晶动力学

王平华 , 徐国永

应用化学 doi:10.3969/j.issn.1000-0518.2004.08.007

用熔融复合法制备聚丙烯/凹凸棒土纳米复合材料,用DSC法研究其非等温结晶行为,对所得的数据分别用Jeziorny法、Ozawa法和Liu法进行处理.结果表明,Jeziorny法和Liu法处理非等温结晶过程比较理想.聚丙烯及聚丙烯/凹凸棒土纳米复合材料的结晶活化能分别为194.1和162.8 kJ/mol,表明凹凸棒土的加入,降低了聚丙烯的结晶活化能,且t1/2缩短,起到了异相成核作用.

关键词: 聚丙烯 , 凹凸棒土 , 纳米复合材料 , 非等温结晶动力学