材料期刊网

FEM NUMERICAL SIMULATION OF THE SOFT MEDIUM TUBE EXPANSION PROCESS

J.L. Song and W. W. Wang Taiyuan Heavy Machinery Institute , Taiyuan 030024 , China

金属学报(英文版)

In this paper the soft medium tube expanding process of different loading case and tube sheet structure is simulated with FEM. The expanding patterns under different conditions are obtained. The correction of the Single-tube Model is verified, and cor- responding procedures are also proposed to correct the error.

关键词: soft medium tube expansion , null , null

Densification of the Tungsten Heavy Alloys at 1473 K and Fabrication of W-Mo System FGM with Density Gradient

Huaping XIONG , Lianmeng ZHANG , Junguo LI , Runzhang YUAN

材料科学技术（英文）

The tungsten heavy alloys with Ni-Al and Fe-Al additives were sintered by hot-press method at 1473 K for 1 h. It was found that the relative density of the W-Fe alloy could be increased evidently by addition of Al. However, the relative density of W-Ni-Al alloy with low content of Al was conversely decreased considerably compared with that of W-Ni alloy. The causes have been studied. The sintering experiments of Mo alloy and W-Mo alloys with 3 wt pct Fe-1.5 wt pct Al additives were also carried out under the same sintering condition of low temperature. Finally, W-Mo system FGM with density gradient was successfully fabricated. Its density changed gradually from 17.0´103 kg/m3 to 9.5´103 kg/m3 within the middle 1.1 mm thickness range.

关键词:

RECRYSTALLIZATION OF SWAGED W-Ni-Fe HEAVY ALLOY DURING ANNEALING TREATMENT

Z. Li , Y.L. Yand , J.K Xi , J.X. Qu and H. S. Shao (Department of Materials Engineering , Luoyang institute of Technology , Luoyang 471039 , China)(Beijing Graduate School , China University of Mining and Technology , Beijing 100083 , China)

金属学报(英文版)

Annealing treatment has a strong effect on mechanical Properties of cold worked tungsten-nickel-iron heavy alloys. A 93W-4.5Ni-2.5Fe alloy swaged 15% was annealed from 500 to 1350℃ to investigate the changes in microstructure and their effects on mechanical properties. Recrystallization of W particles takes place during annealing treatments above 800℃ and the microhardnesses reduces rapidly. High density of dislocations in the, matrix phase after annealing treatment at 1350℃ suggests that recrystallization of the matrix phase has not taken place. A small decrease in microhardness of the matrix phase is caused by recovery during the annealing treatments.The changes in mechanical properties of swaged and annealed 93W-4.5 Ni-2.SFe alloy are mainly due to the changes in microstructure of W particles because of their recrystallization.

关键词: : 93 W-4.5 Ni-2. 5 Fe alloy , null , null

MICROSTRUCTURE AND PROPERTIES OF SiC_w/6061Al COMPOSITE The Author is now with Institute of Metal Research,Academia Sinica,China

MA Zongyi YAO Zhongkai Harbin Institute of Technology , Harbin , China

金属学报(英文版)

The SiC_w/Al composite prepared by squeeze casting has a combination of superior room temperature specific strength and modulus together with excellent thermal properties.The extrusion can make an improvement on the strength and ductility of the composite from 582 MPa as squeeze casted up to 639 MPa,and on the transformation from isotropic to the anisotropic structure.This seems to be explained by the orientation of whiskers and the densification of dislocations in matrix.TEM observation indicates that the stacking fault is the usual planar defect on the SiC_w surface. composite;;SiC whisker;;Al alloy;;microstructure

关键词: composite , null , null , null

S355J2W耐候钢的耐腐蚀性能

鲁二敬 , 卢峰华 , 许鸿吉 , 谢明 , 钮旭晶

机械工程材料

通过周期浸润腐蚀试验，对比研究了S355．12W耐候钢和Q345R低合金钢在NariSOs溶液中的耐腐蚀性能，并用扫描电镜对腐蚀产物进行了观察和分析。结果表明：在相同试验条件下，S355J2W耐候钢的腐蚀速率低于Q345R钢的；S355J2W耐候钢会在表面形成黑褐色锈层，而Q345R钢表面形成橘红色易剥落的疏松锈层；S355J2W耐候钢腐蚀产物微观形貌为沿放射性方向生长的针状晶体，Q345R钢为颗粒状聚合物堆积而成，形状无规则，颗粒之间有较大的空隙。

关键词: S355J2W耐候钢 , 周期浸润腐蚀试验 , 耐腐蚀性能

Effect of Co and W additions on the structure and magnetic properties of Nd2Fe14B/alpha-Fe nanocomposite magnets

Journal of Physics D-Applied Physics

The effect of Co addition combined with W on the microstructure and magnetic properties of nanocomposite magnets with composition of (1 - x wt%)Nd8.55Fe84.49W0.60 B-0.636 + x wt% CO, prepared by mechanical alloying, has been investigated. The addition of W can increase the unit cell volume of soft and hard phases in nanocomposite: magnets, and cause the anisotropy field of the hard phase component to increase. Therefore, the addition of W can improve coercivity. On the other hand, addition of Co leads to a decrease of the grain size of the alpha-Fe soft phase component in nanocomposite magnets annealed at temperatures lower than 670 degrees C. It leads further to a decrease of the optimal annealing temperatures, an increase of the remanence and maximum magnetic energy product, and a slight decrease of the coercivity. With increasing the content of Co, the dependence of remanence J(r) on annealing temperature T-a changes from a convex shape, giving a maximum, to a monotonically decreasing one. These phenomena have been explained in terms of the variation of grain growth and exchange coupling between the grains, due to the addition of Co and W.

关键词: nd-fe-b;remanence enhancement;alloys;phase;microstructure;nb

Wetting phenomena in CuZr-based glassy alloys/W system

Journal of Alloys and Compounds

The wetting behavior and interfaces of CuZr-based glassy alloys/W system were investigated by the sessile drop method. It was found that Cu(50)Zr(50)/W, Cu(47.5)Zr(47.5)Al(5)/W and Cu(40)Zr(44)Al(8)Ag(8)/W system had the final equilibrium contact angle around 18 degrees, 8 degrees and 3 degrees at corresponding experimental temperatures. Base on the scanning electron microscopy observing, no reaction product can be found at the interface of Cu(47.5)Zr(47.5)Al(5)/W and Cu(40)Zr(44)Al(8)Ag(8)/W, and some granular reaction products appeared along the interface of Cu(50)Zr(50)/W. The present work indicates that Cu(47.5)Zr(47.5)Al(5) and Cu(40)Zr(44)Al(8)Ag(8) bulk metallic glasses (BMGs) are appropriate for the fabrication of W reinforced BMGs matrix composite. (C) 2010 Elsevier B.V. All rights reserved.

关键词: Wettability;Diffusion;Composite;Metallic glasses;bulk metallic glasses;mechanical-properties;matrix composites;compressive plasticity;amorphous-alloys;behavior;tungsten;al;solidification;deformation

S355J2W+N钢激光-MAG复合焊与MAG焊对比

谷晓鹏 , 段珍珍 , 邓钢 , 谷晓燕

材料工程 doi:10.11868/j.issn.1001-4381.2015.02.004

利用激光-MAG复合焊和MAG焊进行了厚板S355J2W+N低碳钢的焊接实验,分析了两种焊接方法接头的微观组织和力学性能.结果表明:复合焊和MAG焊焊缝接头均由焊缝区、过热区、重结晶区和不完全重结晶区构成,复合焊接头截面呈“高脚杯”状特点,焊缝填充量和热影响区宽度较MAG焊明显减小.复合焊由于冷却速率快,过热区魏氏组织略有增多,硬度高于MAG焊,抗拉强度和弯曲性能与MAG焊相比,无显著差异,均能够满足生产标准的要求.

关键词: S355J2W+N , 激光 , MAG , 复合焊 , 接头组织 , 性能

使用安捷伦J&W DB-35ms超高惰性色谱柱和DB-XLB色谱柱对水中低于μg·L-1级的有机氯农药和除草剂进行GC/μECD法分析

Doris Smith , Ken Lynam

环境化学

本文中使用安捷伦SPEC C18AR固相萃取膜盘成功萃取了水中的有机氯农药残留和除草剂.使用双柱配置的GC/μECD系统进行检测,安捷伦J&W DB-35ms UI超高惰性色谱柱作为分析柱,DB-XLB色谱柱为确认柱.该方法为浓度接近或低于最大污染限值的含氯有机物提供了高度灵敏的分析方法.根据预估的分析物萃取浓度,方法使用的校准范围为1-100 ng· mL-1.分别对0.01 μg·L-1的加标水样和一个自来水水样进行了萃取和分析,结果证明可满足水中的有机氯农药残留和除草剂的测定.

关键词: 有机氯农药 , 除草剂 , 色谱柱

Ion sputter erosion in metallic glass-A response to "Comment on: Homogeneity of Zr(64.13)Cu(15.75)Ni(10.12)Al(10) bulk metallic glass" by L-Y. Chen, Y-W. Zeng, Q-P. Cao, B-J. Park, Y-M. Chen, K. Hono, U. Vainio, Z-L. Zhang, U. Kaiser, X-D. Wang, and J-Z Jiang J. Mater. Res. 24, 3116 (2009)

Journal of Materials Research

The morphology of the dark and bright regions observed by transmission electron microscopy for the Zr(64.13)Cu(15.75)Ni(10.12)Al(10) bulk metallic glass strongly depends on the ion beam parameters used for ion milling. This indicates that the ion beam could introduce surface fluctuation to metallic glasses during ion milling.

关键词: room-temperature