HAO Yunwei
,
DENG Bo
,
ZHONG Cheng
,
JIANG Yiming
,
LI Jin
钢铁研究学报(英文版)
The nanocrystalline microstructure of the surface of 316 stainless steel (316SS) induced by surface mechanical attrition treatment (SMAT) was determined by Xray diffraction (XRD) and scanning electron microscopy (SEM). The technique of hydrogen embrittlement was first used to obtain the information of the brittleness cleavage plane. The effects of SMAT and the following annealing process on the corrosion behavior of 316SS were investigated by potentiodynamic polarization curves and potentiostatic critical pitting temperature measurements. The results demonstrated that the nanocrystalline layer with an average grain size of 19 nm was produced. However, there were lots of cracks on the surface, which led to the degradation in the corrosion resistance of 316SS after SMAT. Nevertheless, after annealing treatment, the corrosion resistance of the nanocrystalline surface had been improved greatly. The higher the annealing temperature, the better was the corrosion resistance.
关键词:
surface mechanical attrition treatment;nanocrystalline;corrosion;heat treatment
王丽
,
吴希文
,
张晨鼎
,
张通
,
简丽
,
武朝军
,
周涛
稀土
doi:10.3969/j.issn.1004-0277.1999.02.003
采用湿渣法研究了0℃时碘化钇(YI3)-乌洛托品氢碘酸盐(C6H12N4.HI)-水(H2O)的三元体系相平衡,绘制了该体系的等温溶解度相图,相图分析结果表明,该体系中有组成为YI3.C6H12N4.HI.14H2O的配合物生成,对所得配合物进行了化学分析、X-射线粉末衍射、红外光谱、差热-热重分析,测定了其密度、晶体轴性,确定了配合物结构中的配位关系.
关键词:
相平衡
,
碘化钇
,
乌洛托品氢碘酸盐
,
配合物
Journal of Materials Research
The morphology of the dark and bright regions observed by transmission electron microscopy for the Zr(64.13)Cu(15.75)Ni(10.12)Al(10) bulk metallic glass strongly depends on the ion beam parameters used for ion milling. This indicates that the ion beam could introduce surface fluctuation to metallic glasses during ion milling.
关键词:
room-temperature
宁远涛
贵金属
评述了合金元素对Au的漂白效果和机制，介绍了白色开金的几种色度参数，如CIE-L a*b*色度参数和颜色盒，CIE-LAB-C-H-L米制色度参数和基于CIE-XYZ色度参数的ASTM D1925黄色指数YI，讨论了某些白色开金的色度参数与冶金学特征。基于金合金的漂白效应与合金成分的密切关系，ASTM D1925黄色指数YI为设计白色开金成分提供了基本的指南。
关键词:
金属材料
,
Au合金
,
白色开金
,
色度参数
,
色度图
徐旸
,
汪艳
,
傅轶
合成材料老化与应用
采用多次挤出的方法和氧化诱导期(OIT)方法考察了抗氧剂对聚丙烯热氧稳定性的影响,测定了各次挤出试样的熔体流动速率(MFR)、黄度指数(YI)、力学性能以及氧化诱导期(OIT).实验结果表明:添加由主抗氧剂1010和辅抗氧剂168组成的复合抗氧剂后聚丙烯的熔体流动速率(MFR)、黄度指数(YI)、拉伸强度和冲击强度、氧化诱导期(OIT)与未添加抗氧剂的聚丙烯相比降低明显减缓,说明抗氧剂可有效抑制聚丙烯的老化,延长其使用寿命.
关键词:
聚丙烯
,
抗氧剂
,
热稳定性
倪永中
,
徐鸿
材料科学与工程学报
本文提出了一种基于粒子群算法和有限元方法的弹塑性本构方程参数的确定方法,并在此基础上开发了参数自动优化系统CMPI(Constitutive Material Parameter Identification).通过使最小二乘形式的目标函数达到极小值,实现参数的动态寻优;模型参数作为粒子群优化模块的输入,采用应变(应力)控制方法,调用材料非线性有限元模块计算特定参数时的应力(应变)响应,并计算与实验数据的误差,从而实现优化过程.CMPI目前适用于A-F类模型(Chaboehe、Ohno-Wang、Jiang-Sehitoglu)的参数优化,以此为基础,不难扩展到其他材料模型.
关键词:
粒子群
,
材料非线性
,
有限元
,
Ohno-Wang 模型
Physical Review B
An elastic Ising model for CoMnO(6) chain is proposed to explain the ferroelectricity induced by collinear magnetic order in Ca(3)CoMnO(6), and then a mean-field theory with interchain spin interactions based on this model is developed. With inclusion of the dynamics of polarization domains at finite temperature, we address the rationality of our theory by the good agreement of the calculated electric polarization and dielectric susceptibility with the reported data on Ca(3)Co(2-x)Mn(x)O(6) (x approximate to 0.96) [Y. J. Choi, H. T. Yi, S. Lee, Q. Huang, V. Kiryukhin, and S.-W. Cheong, Phys. Rev. Lett. 100, 047601 (2008)], a typical diatomic Ising spin chain system, while the predicted magnetic susceptibility shows some difference from experiment, the reason of which is discussed.
关键词:
calcium compounds;cobalt compounds;dielectric polarisation;ferroelectricity;Ising model;magnetic susceptibility;multiferroics;optical susceptibility;one-dimensional oxides;magnetic-properties;multiferroics;ca3co1+xmn1-xo6
余金秋
,
彭鹏
,
刁成鹏
,
吴浩
,
何华强
人工晶体学报
LaBr3 ∶Ce、LuI3 ∶Ce、SrI2 ∶Eu等新型卤化物闪烁晶体因其高光输出、高能量分辨率等优异的闪烁特性而引起人们的广泛关注.高纯无水稀土卤化物是生长上述闪烁晶体所必需的原料,但其制备困难和高昂成本,严重制约了这些晶体的发展和应用.本文报道了无水LaBr3、CeBr3、LaCl3、CeCl3、LuI3、GdI3、YI3、CeI3、EuI2等常用稀土卤化物的制备方法,并对其有效表征手段进行了介绍.
关键词:
闪烁晶体
,
稀土卤化物
,
制备
,
表征
张剑
,
周储伟
,
雷笑
,
叶见曙
,
卓家寿
复合材料学报
对于混杂CFRP/GFRP筋高性能混凝土(HPC)梁,研究一种新的三维非线性梁壳组合单元,对HPC梁进行了全过程分析.引入实体退化壳单元理论,利用空间梁单元模拟预应力CFRP筋,并根据CFRP筋单元节点线位移和转角位移的协调性,推导CFRP筋单元对梁壳组合单元刚度矩阵的贡献,同时对GFRP筋和HPC梁采用分层壳单元模拟.并运用Jiang屈服准则、Madrid强化准则等描述混凝土的材料非线性,提出一种新的非线性梁壳组合单元,研制相应的三维非线性计算程序.计算结果与试验数据吻合良好,说明本文构造的非线性梁壳组合单元的正确性和研制程序的可靠性,以及混凝土材料非线性描述的合理性;采用组合单元能准确模拟CFRP筋的几何构形,能综合考虑其拉压弯剪性能,利于全面地反映配筋对结构的增强作用.
关键词:
CFRP筋
,
GFRP筋
,
梁壳组合单元
,
HPC梁
,
材料非线性
章晓波
,
刘宁
,
袁红梅
,
荣春兰
硬质合金
doi:10.3969/j.issn.1003-7292.2008.01.002
为探究Mo、WC、ZrC对TiC-Ni系金属陶瓷组织的影响,真空烧结制备了TiC-Ni系金属陶瓷.利用X射线衍射仪(X-ray diffraction,XRD)、扫描电子显微镜(scanning electron microscope,SEM)、能谱仪(energy dispersive spectrometer,EDS)等研究了Mo、WC和ZrC对金属陶瓷显微组织的影响.结果表明,TiC基金属陶瓷的显微组织随着Mo、WC、ZrC的加入而逐渐细化.形成(Ti,Mo)C、(Ti,Zr,Mo)C、(Ti,Mo,W)C、(Ti,Zr,Mo,W)C、(Zr,Yi,Mo)C和(Zr,Ti,Mo,W)C等固溶体,并且在10%TiC-ZrC-14%Mo-15%WC-20%Ni-1%C试样中出现了无芯晶粒(corelesss grains)、微裂纹及微孔洞.断裂韧性测试结果表明.该显微结构能大大提高材料的断裂韧性.
关键词:
金属陶瓷
,
显微组织
,
微裂纹
,
断裂韧性
