欢迎登录材料期刊网

材料期刊网

高级检索

  • 论文(27)
  • 图书()
  • 专利()
  • 新闻()

Effects of Cure Pressure Induced Voids on the Mechanical Strength of Carbon/Epoxy Laminates

Ling LIU , Boming ZHANG , Zhanjun WU , Dianfu WANG

材料科学技术(英文)

This work aims at designing a set of curing pressure routes to produce laminates with various void contents. The effects of various consolidation pressures resulting in different void contents on mechanical strength of carbon/epoxy laminates have been examined. Characterization of the voids, in terms of void volume fraction, void distribution, size, and shape, was performed by standard test, ultrasonic inspection and metallographic analysis. The interlaminar shear strength was measured by the short-beam method. An empirical model was used to predict the strength vs porosity. The predicted strengths conform well with the experimental data and voids were found to be uniformly distributed throughout the laminate.

关键词: Carbon/epoxy laminates , null , null , null

复合材料层合壳体的三维本构方程

杨宜谦

玻璃钢/复合材料 doi:10.3969/j.issn.1003-0999.1999.04.002

本文推导出了复合材料层合壳体的三维本构方程,修正了Reddy和Liu论文中的错误.

关键词: 复合材料 , 壳体 , 三维本构方程

TRACKING OBSERVATION ON SUBSURFACE CRACK IN BEARING STEEL GCr15 UNDER ROLLING CONTACT

CHEN Longqing Zhengzhou Institute of Technology , Zhengzhou , China CHEN Qing Luoyang Institute of Technology , Luoyang , China

金属学报(英文版)

Based on the sequent tracking observation on spalling of steel GCr15 under rolling contact fa- tigue,an expression for estimating the propagation of subsurface cracks was derived.The rol- ling contact fatigue life was found to be markedly related to the subsurface crack propagation angle.A new explanation of reason why the rolling contact fatigue life can be prolonged by residual compressive stress and retained austenite was advanced.

关键词: contact fatigue , null , null , null , null

Influence of Rolling Reductions on Recrystallization Texture in Commercially Pure Al

MAO Weimin University of Science and Technology , Beijing , 100083 , China.

材料科学技术(英文)

The recrystallization texture in commercially pure Al is investigated after the samples are rolled differently and annealed.The samples with low rol- ling reductions could be generally recovered or recrystallized in situ and characterized by the re- tained G{110}<001>component.This recovery process decreases during annealing with the increase of reduction.The appearance of the B/R{359}. <132>and R{123}<634>components de- pending on the rolling reduction is investigated and the less developed Cube{100}<001>component in commercially pure ahninium is also discussed.

关键词: recrystallization , null , null , null

Intergrain interaction, coercivity and Henkel plot for NdFeB magnets

Ruwei GAO , Wei CHEN , Jiancheng ZHANG , Weicun FONG , Wei LI , Xiumei LI

材料科学技术(英文)

For both sintered and nanocomposite NdFeB magnets, deltaM(H) of the Henkel plot increases from zero, and reaches a peak, then decreases and changes to the negative values with increasing applied field. This shows that the intergrain interaction changes from the exchange-coup ling type into the magnetostatic interaction type. The magnetic field corresponding to the peak of deltaM(H) is slightly smaller than the coercivity of magnet. The peak of deltaM(H) for aligned sintered magnet is greater than that for misaligned magnet. deltaM(H) peak of the nanocomposite NdFeB magnets increases with decreasing grain sizes. It indicates that the effect of alignment field on the properties of magnet is similar to that of exchange-coupling interaction.

关键词:

INFLUENCE OF SURFACE HARDENING ON CONTACT FATIGUE LIFE OF NODULAR CAST IRON

TAO Zengyi LUO Jiaming Huazhong University of Science and Technology , Wuhan , China TAO Zengyi , Faculty of Metallic Materials , Dept.of Mechanical Engineering No.2 , Huazhong University of Science and Technology , Wuhan 430074 , China

金属学报(英文版)

The influence of laser surface melting and induction hardening on the surface structure,con- tact fatigue life and failure behaviour of the nodular cast iron has been investigated.The con- tact fatigue life can be improved by both laser treatment and induction hardening,but the fail- ure process and type are different from each other.The former is due to lumpy and deep spal- ling caused by crack propagation between the quenching zone and the substrate,and the latter is due to nubby and surface flaking caused by the oil wedged action into surface cracks.

关键词: surface hardening , null , null , null

聚醛/蒙脱土纳米复合材料非等温结晶动力学研究

徐卫兵 , 戈明亮 , 何平笙

应用化学 doi:10.3969/j.issn.1000-0518.2001.09.011

用熔融插层法制备聚甲醛/蒙脱土纳米复合材料,用X射线衍射研究聚甲醛及复合材料的微观结构,表明复合材料是纳米复合材料.用DSC法研究其非等温结晶行为,对所得数据分别用Jeziorny法、Ozawa法和Liu法进行处理.结果表明,Jeziorny法和Liu法处理非等温结晶过程比较理想.聚甲醛及聚甲醛/有机蒙脱土纳米复合材料的结晶活化能分别为334.6和196.9 kJ/mol,说明有机蒙脱土的加入,降低了聚甲醛的结晶活化能,且t1/z缩短,起到了异相成核的作用.

关键词: 聚甲醛 , 蒙脱土 , 纳米复合材料 , 非等温结晶动力学

聚丙烯/凹凸棒土纳米复合材料的非等温结晶动力学

王平华 , 徐国永

应用化学 doi:10.3969/j.issn.1000-0518.2004.08.007

用熔融复合法制备聚丙烯/凹凸棒土纳米复合材料,用DSC法研究其非等温结晶行为,对所得的数据分别用Jeziorny法、Ozawa法和Liu法进行处理.结果表明,Jeziorny法和Liu法处理非等温结晶过程比较理想.聚丙烯及聚丙烯/凹凸棒土纳米复合材料的结晶活化能分别为194.1和162.8 kJ/mol,表明凹凸棒土的加入,降低了聚丙烯的结晶活化能,且t1/2缩短,起到了异相成核作用.

关键词: 聚丙烯 , 凹凸棒土 , 纳米复合材料 , 非等温结晶动力学

Reply to Comments on "Interdiffusion in the beta phase region of the Ni-Al-Cr system"

Scripta Materialia

A recent comment on a previously published paper addressed the invalid explanation of the off diagonal interdiflusion coefficients of the beta-Ni(Al,Cr) phase in the Ni-Cr-Al system according to the symmetric property of the thermodynamic matrix. In this paper, the experimental data presented by Hou et al. was reanalyzed and the interdiffusion coefficient matrix was estimated again. The results of the analysis have been discussed in terms of a brief reply to the comments of Liu and Liang. (C) 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

关键词: Diffusion;Intermetallic compound;Ni-Cr-Al

PET-PEE/ATO纳米复合材料的非等温结晶动力学

邓超 , 邵玮 , 李春忠

高分子材料科学与工程

采用元机纳米锑掺杂二氧化锡(ATO)和有机聚醚酯(PEE)协同提高聚时苯二甲酸乙二酯(PET)的抗静电性能,合成了聚对苯二甲酸乙二酯-聚醚酯/锑掺杂二氧化锡纳米复合材料(PET-PEE/ATO).使用Czawa方程和Liu-Mo方程研究了PET-PEE/ATO纳米复合材料的非等温结晶过程.Ozawa方程研究发现,在非等温结晶过程中,PET、PET-PEE、PET/ATO、PET-PEE/ATO的成核性能依次提高.Liu-Mo方程发现,ATO和PEE的加入分别促进了异相成核作用和加快了结晶生长,PET-PEE/ATO结晶成核性能最好,结晶速率最快.

关键词: 聚对苯二甲酸乙二酯 , 有机聚醚酯 , 无机纳米锑掺杂二氧化锡 , 纳米复合材料 , 非等温结晶动力学

  • 首页
  • 上一页
  • 1
  • 2
  • 3
  • 下一页
  • 末页
  • 共3页
  • 跳转 Go

出版年份

刊物分类

相关作者

相关热词