欢迎登录材料期刊网

材料期刊网

高级检索

  • 论文(663)
  • 图书()
  • 专利()
  • 新闻()

A MODEL OF BUTTERFLY CATASTROPHE FOR ANODE EFFECT IN ALUMINA ELECTROLYSIS

PAN Yue Qingdao University of Metallurgy and Mining

金属学报(英文版)

A model of butterfly catastrophe is confirmed based on the matching and fitting the previous experimental data from alumina electrolysis when anode effect occurs.The complicated behaviour of the cryolite-alumina melt system with varying parameters could be generally described by this model.Therefore,the anode effect and its occurrence may be thoroughly understood.

关键词: alumina electrolysis , null , null

Corrosion Behaviors Of The Exposed Side And Underside Of Low Alloy Weathering Steel In Qingdao And Wanning For 18 Months

S.T. Wang , S.W. Yang , K.W. Gao , X.L. He

金属学报(英文版)

For 18 months, a newly developed low alloy weathering steel has been exposed in two coastal sites (Qingdao in the north China, Wanning in the south China). The different corrosion behaviors of the exposed side and the underside of the samples were characterized by X-ray diffraction (XRD), polarization curve, electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), and N$_{2}$ adsorption approach. It was found that the samples exhibited higher corrosion rate in Wanning than that in Qingdao. The underside of the samples corrodes more seriously than the exposed side in Qingdao, whereas the result in Wanning is just the reverse. The protection performance of rust layers mainly depends on its compactness and the enrichment of Cu and Cr is a secondary causation. The different compactness of rust layers in the exposed side and the underside originates from different corrosion conditions of the two sides.

关键词: alloy weathering steel , null

Study on blister of the coating on solid cantilevers of hydraulic supports for coal mining

Science China-Technological Sciences

In this work, blister of the Cu-Sn plus Cr coating on solid cantilevers of hydraulic supports for coal mining was investigated by hydrogen-charging, Devanathan-Stachurski method and electrochemical impedance spectroscopy (EIS) measurement. It was found that the permeation hydrogen during the pickling process and the electroplating process was responsible for the blisters. The residual tensile stress due to the machining process would increase the permeation hydrogen amount during pickling and electroplating processes.

关键词: hydrogen blister;hydrogen permeation;EIS;sub-surface hydrogen;concentration;ph-microscopy;hydrogen;permeation;steel;metals

Application of Microwave Radiation to Extractive Metallurgy

LIU Chunpeng XU Yousheng HUA Yixin Kunming Institute of Technology , Kunming , 650093 , China.

材料科学技术(英文)

In applying the microwave radiation to extractive me- tallurgy,it is essential first of all to find the extent of microwave energy absorbed by various minerals experi- mentally.In this paper,more than 25 kinds of common useful minerals have been individually irradiated by a 500 W,2450 MHz microwave source in an enclosed quartz crucible to ascertain their heating temperature in a definite time.In addition,the reduction and cbloridization tests were also carried out on the titanomagnetite concentrate and pentlandite with microwave heating,respectively. These experiments indicate potential applications of util- izing microwave energy in extractive metallurgy.

关键词: microwave radiation , null , null , null

Modelling a Skin-Pass Rolling Process by Means of Data Mining Techniques and Finite Element Method

R Escribano , R Lostado , F J Martínez-de-Pisón , A Pernía , E Vergara

钢铁研究学报(英文版)

An experience is presented using the finite element method (FEM) and data mining (DM) techniques to develop models that can be used to optimize the skin-pass rolling process based on its operating conditions. A FE model based on a real skin-pass process is built and validated. Based on this model, a group of FE models is simulated with different adjustment parameters and with different materials for the sheet; both variables are chosen from pre-set ranges. From all FE model simulations, a database is generated; this database is made up of the above mentioned adjustment parameters, sheet properties and the variables of the process arising from the simulation of the model. Various types of data mining algorithms are used to develop predictive models for each of the variables of the process. The best predictive models can be used to predict experimentally hard-to-measure variables (internal stresses, internal strains, etc) which are useful in the optimal design of the process or to be applied in real time control systems of a skin-pass process in-plant.

关键词: skin-pass rolling , predictive model , finite element method , data mining

Laser cladding coating against erosion-corrosion wear and its application to mining machine parts

Wear

Erosion-corrosion wear is a common failure type for many mining machine parts. This paper introduces the erosion-corrosion wear resistant, nickel based alloy coating, which is manufactured onto AISI 1045 steel by laser cladding technology. X-ray diffraction, scanning electron microscopy (SEM) and microhardness testing were used to investigate the microstructure and hardness of the coating. After that, erosion-corrosion wear experiments were carried out on an MSH type erosion-corrosion wear tester to study the erosion-corrosion wear characteristics of the laser clad coating. 420 stainless steel was also tested under the same conditions as a contrast specimen. The slurry was made up of water and quartz, while sulphuric acid was added to create corrosive condition. Experiments were arranged to test the relation between erosion-corrosion wear rate, the acid concentration and slurry erosion speed. Finally this gaper introduces the application of laser cladding technology to balance plates of slurry pumps used in underground mining. (C) 1997 Elsevier Science S.A.

关键词: laser cladding;coating;erosion-corrosion wear;synergism

OXIDE METALLURGY-ITS PURPOSES AND PRACTICAL APPROACHES

Z. T. Ma and D. Janke(Institute of Iron and Steel Technology , Freiberg University of Mining and Technology , Germany)

金属学报(英文版)

Useder certain conditions, nonmctallic inclusions such as oxides, sulfides, nitrides and carbides are no longer harmful to sted service properties. With the new concept of oxide metallurgy, these properties can be improved by generating fine oxide inclusions which serve as heterogeneous nuclei for sulfide and fine ferrite[1-4]. A novel continuous casting (CC) process is expected to be created with the utilization of oxide metallurgy. This is also useful for the forthcoming technologies of direct rolling and near-net-shape casting. The main idea of oxide metallurgy consists of an alternative oxidation technology. It is based on steels treated by complex metals such as Ti, Zr, Ti-Zr alloys and rare earth metals. The selected deoxidants should follow the required conditions which are concluded in this paper.

关键词: oxide , null , null , null

Improvement of Ductility of Powder Metallurgy Titanium Alloys by Addition of Rare Earth Element

Yong LIU , Lifang CHEN , Weifeng WEI , Huiping TANG , Bin LIU

材料科学技术(英文)

Ti-4.5Al-6.0Mo-1.5Fe, Ti-6Al-1Mo-1Fe and Ti-6Al-4V alloys were prepared by blended elemental powder metallurgy (PM) process, and the effects of Nd on the microstructures and mechanical properties were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). It was found out that the addition of Nd increased the density of sintered titanium alloys slightly by a maximum increment of 1% because small amount of liquid phase occurred during sintering. The addition of Nd shows little effect on the improvement of tensile strength, while the elongation is significantly improved. For example, the elongation of Ti-4.5Al-6.0Mo-1.5Fe can be increased from 1% without addition of Nd to 13% at a Nd content of 1.2 wt pct.

关键词: Powder metallurgy titanium alloy , null , null , null

PAN基炭纤维经济规模分析

夏春霞 , 闫亚明 , 邓蜀平 , 白光君 , 蒋云峰 , 宋惠森 , 王钰

新型炭材料 doi:10.3969/j.issn.1007-8827.2001.04.013

聚丙烯腈(Polyacrylonitrile缩写为PAN)基炭纤维市场需求旺盛,但由于我国PAN基炭纤维生产企业规模小、产品性能低,产品占领不了市场,企业效益欠佳.通过经济规模方法的分析,就国内现有技术状况和两个样本生产线,用工程技术法对PAN基炭纤维的经济规模进行分析,为我国炭纤维产业化发展提供参考.分析表明,国内PAN基炭纤维经济规模的起点为200t/a~275t/a.

关键词: PAN基炭纤维 , 经济规模 , 工程技术法

  • 首页
  • 上一页
  • 1
  • 2
  • 3
  • 4
  • 5
  • 下一页
  • 末页
  • 共67页
  • 跳转 Go

出版年份

刊物分类

相关作者

相关热词