李嘉诚
,
QIU Xue-Qing
,
冯玉红
,
LIN Qiang
应用化学
doi:10.3969/j.issn.1000-0518.2008.08.004
通过对单一及复合型表面活性剂水溶液临界胶束浓度(CMC)和表面张力(γcmc)的测定分析,研究了表面活性剂对以水为介质、环己酮为溶剂形成的联苯菊酯质量分数为2.5%微乳液相行为及稳定性的影响.结果表明,在几种单一非离子表面活性剂中,苯乙烯基苯酚聚氧乙烯聚氧丙烯醚嵌段型非离子表面活性剂EPE的γcmc最低,为28.18 mN/m;按m(EPE):m(SDBS)=2∶1形成的复合型表面活性剂水溶液的γcmc更低,为27.60 mN/m,有利于O/W型微乳液的形成,当其质量分数为10%时,配制联苯菊酯质量分数为2.5%微乳液的有效成分热贮分解率为2.35%.
关键词:
表面活性剂
,
微乳液
,
相行为
,
稳定性
Jing TIAN
,
Xiang XUE
,
Yuebing ZHANG
,
Yalong GAO
,
Luzhi LIU
,
Qin SUN
,
Shiyou YUAN
材料科学技术（英文）
By adopting the solid modeling software SoldEdge and the enmeshment software SRIFCast as the pre-processing platform, a Ni based alloy turbine blade was three-dimensionally modeled and automatically enmeshed. A software code for numerical simulation of fluid flow and heat transfer was developed. The Xue criterion and Niyama criterion were used to predict the position of the shrinkage defects occurring in the solidification processes of the turbine blade. The results showed that both Xue and Niyama criteria could precisely predict the shrinkage defects in the Ni based alloy turbine blade. This indicates that numerical simulation is a significant tool in improving casting quality.
关键词:
桂南
,
樊建人
,
陈松
工程热物理学报
本文采用直接数值模拟计算了Re=669,S=1.42强旋流中的颗粒运动特性.计算的部分流动条件依照SommerfeId & Qiu的实验条件进行模化.模拟的结果揭示了旋流近场的颗粒运动的浓度、速度的时均量和脉动值的统计分布特性.
关键词:
旋流
,
颗粒运动
,
直接数值模拟
,
统计特性
Journal of Physics and Chemistry of Solids
The layered ternary ceramics Ti3SiC2 and Ti3AlC2 are isostructural and can form Ti3Si1-xAlxC2 solid solutions combining the advanced properties of both compounds [H.B. Zhang, Y.C. Zhou, Y.W. Bao, M.S. Li, Improving the oxidation resistance of Ti3SiC2 by forming a Ti3Si0.90Al0.1C2 solid solution, Acta Mater. 52 (2004) 3631-3637; E.D. Wu, J.Y. Wang, H.B. Zhang, Y.C. Zhou, K. Sun, Y.J. Xue, Neutron diffraction studies of Ti3Si0.9Al0.1C2 compound, Mater. Lett. 59 (2005) 2715-2719; J.Y. Wang, Y.C. Zhou, First-principles study of equilibrium properties and electronic structure of Ti3Si0.75Al0.25C2 solid solution, J. Phys.: Condens. Matter 15 (2003) 5959-5968; Y.C. Zhou, J.X. Chen, J.Y. Wang, Strengthening of Ti3AlC2 by incorporation of Si to form Ti3Al1-xSixC2 solid solutions, Acta. Mater. 54 (2006) 1317-1322]. In the present work, the solid solutions of Ti3Si1-xAlxC2 (x = 0, 0.25, 0.33, 0.5, 0.67, 0.75, 1) are investigated by first-principle calculations based on pseudo-potential plan-wave method within the density functional theory framework. The results show that as Al content increases in the solid solution, all the bonds have weakened to certain extents, which lead to an unstable structure both energetically and geometrically. The calculated results are compared and discussed with the reported data for the Ti3Si1-xAlxC2 solid solutions. (c) 2007 Elsevier Ltd. All rights reserved.
关键词:
ceramics;ab initio calculations;electronic structure;electrical;conductivity;oxidation behavior;mechanical-properties;ti3sic2;temperature;ti3alc2;air;si
