材料期刊网

Profile and Flatness Control Technology With a Long Shifting Stroke on Wide Non-Oriented Electrical Steel Sheets

YANG Guang-hui , CAO Jian-guo , ZHANG Jie , SONG Ping , YAN Tan-li , RAO Ke-feng

钢铁研究学报(英文版)

In order to solve the difficult profile and flatness control problem of wide non-oriented electrical steel sheets, the factors such as the relationship between strip crown control and strip width, the relationship between the maximum wearing value of work roll and the number of a rolling campaign and the wear contour change of work roll were analyzed on the basis of industrial test. Through analyzing the rolling process characteristics of non-oriented electrical steel sheets, the ASR (asymmetry self-compensating work rolls) shape control technology and its roll shifting strategy of the wider non-oriented electrical steel sheets was proposed and developed. When the technology was applied, the number of the wide non-oriented electrical steel (23 mm×1280 mm) in one rolling campaign rose from 40 coils of the trial production to 70 coils of the industrial production, the ratio of the measured strip crown less than 45 μm was increased from 500% to 949%, and the ratio of the measured strip crown more than 60 μm was decreased from 200% to 07%.

关键词: silicon steel , shape control , hot rolling , roll contour

La对Fe-P-N合金Snoek-Ke-K■ster峰的影响

戢景文 , 魏全金 , 张国福 , 赖祖涵 , 陈廷国

金属学报

研究了F? P—N合金加?对Snoek—Ke-Koster(SKK)峰的影响,发现与合金含La,P的原子浓度比(C_(La)/C_p)有关:对于C_(La)/C_p较大(例如4.56和2.6)的合金,La有明显增强SKK阻?效应:对于C_(La)/C_p=0.27的P过饱和合金,La对SKK峰无明显影响。

关键词: 内耗 , Snoek-Ke-Koster peak , Fe-P-La-N alloy

SNOEK-Ke-K■STER PEAK OF INTERNAL FRICTION IN Fe-P-N ALLOYS

Y.Y.Che , G. Y.Zeng , Y. C. Xu and J. W , Ji(College of Science , Northeastern University , Shenyang 110006 , China)

金属学报(英文版)

The internal friction and precipitate phases of the deformed Fe-P-N alloys have been investigated. It has been found that the ratio of depends on the content of P and the relation holds if the content of N is lower than 30wt.ppm and the content of P is lower than 640wt.ppm. It shows that the intercept K2 is related to the presence of the atomic pairs and clusters of P in the alloy matrix.

关键词: internal friction , null

EFFECT OF RARE EARTH ON MEDIUM-TEMPERATURE INTERNAL FRICTION OF COMMERCIALLY PURE IRON

JI Jingwen LAI Zuhan WU Yuqin ZHANG Guofu Northeast University of Technology , Shenyang , ChinaLI Guangyi Institute of Metal Research , Academia Sinica , Shenyang , China

金属学报(英文版)

The strong effect of rare earth(RE)on medium-temperature internal friction(IF)of commercially pure iron is closely related to the heat treatment.The RE added into iron has an alloying effect.The Snoek-Ke-Kster(briefly SKK)peak lower as the aging temperature in- creases from 150℃ to 450℃,but it still exists even aged at 600℃.However,the SKK peak temperature T_p does not simply falls as the ascending of aging temperature,it rises again at 600℃ aging.

关键词: internal friction , null , null

硅脂导热涂层改善LED散热性能的研究

张淑芳 , 方亮 , 付光宗 , 董建新 , 陈勇

材料导报

研究了导热硅脂(KE3493)涂层对水下密闭环境下应用的LED灯散热情况的影响,结果表明,LED系统的集成电路板上加入导热涂层能提高LED系统的散热效率,研究结果为导热涂层应用于LED散热系统提供了参考数据.

关键词: 导热涂层 , 散热性能 , LED , 硅脂

BORON ISOTOPE FRACTIONATION DURING PROLONGED ION-BOMBARDMENT

Chinese Physics Letters

Dynamic Monte Carlo simulation is used to explore the B isotope sputtering during 1 ke V Kr ion irradiation. It is found that at both zero and high fluences the light isotope is preferentially ejected in the near-normal direction; meanwhile, there is a low fluence (1.4 x 10(15) ions/cm2), at which the isotope fractionation is independent of the emission angle in the nearly whole angular range.

关键词: simulation

体心立方金属中位错与间隙原子相互作用的回顾——机械波谱术研究

L．B．Magalas

金属学报

根据有关术语、实验结果和理论处理方法的现有数据，对冷加工峰，200，220或250℃峰，Snoek-Koster（SK）峰，以及Snoek-Ke-Koster（SKK）峰进行了评估。并特别强调了葛庭遂教授（Ke）为理解冷加工峰所作的贡献。同时，对由（1）Schoeck，（2）Seeger，（3）王业宁等人，（4）Magalas和Ngai，以及（5） Ogurtani 等人发展的现有理论模型进行了简要的综述.

关键词: Snoek-Koster峰 , null , null , null

体心立方金属中位错与间隙原子相互作用的回顾--机械波谱术研究

金属学报 doi:10.3321/j.issn:0412-1961.2003.11.006

根据有关术语、实验结果和理论处理方法的现有数据,对冷加工峰,200,220或250℃峰,Snoek-Koster(SK)峰,以及Snoek-Ke-Koster(SKK)峰进行了评估.并特别强调了葛庭燧教授(Ke)为理解冷加工峰所作的贡献.同时,对由(1)Schoeck,(2)Seeger,(3)王业宁等人,(4)Magalas 和Ngai,以及(5)Ogurtani等人发展的现有理论模型进行了简要的综述.

关键词: Snoek-Koster峰 , 冷加工峰 , Snoek弛豫 , Cottrell气团 , 葛庭燧 , 内耗 , 机械波谱学 , 位错 , 固溶体 , 铁 , 碳 , 氮

低频电磁铸造Al-4.5%Cu合金微观偏析研究

陈丹丹张海涛王向杰崔建忠

金属学报 doi:10.3724/SP.J.1037.2010.00427

利用直接水冷半连续(常规DC)铸造工艺和低频电磁铸造(LFEC)工艺分别制备了Al-4.5%Cu(质量分数)合金铸锭. 测量了常规DC铸造和LFEC过程中的温度曲线, 研究了低频电磁场条件下的铸锭微观组织变化和Cu元素的微观偏析. 通过金相观察发现, 在低频电磁场作用下, α-Al和$\theta$相的共晶组织变得细小, 其面积分数明显减小. 利用电子探针测量结果绘制Cu元素成分曲线, 发现在凝固的最初过渡区, Cu元素的成分曲线在低频电磁场作用下升高, α-Al中Cu元素含量增加. 通过计算得到Cu元素的有效分配系数k_e, 发现在最初过渡区k_e线性增大到1. LFEC工艺使得Cu元素的k_e变大, 并且随着电流强度的增强这一趋势愈发明显. 由于低频电磁场加速了凝固前沿的冷却速度, 使更多的Cu原子固溶在 α-Al中, Cu元素在铸锭中的微观偏析得到了改善.

关键词: Al-4.5%Cu合金 , low frequency electromagnetic casting (LFEC) , microsegregation , effective distribution coefficient

低频电磁铸造Al-4.5%Cu合金微观偏析研究

陈丹丹 , 张海涛 , 王向杰 , 崔建忠

金属学报 doi:10.3724/SP.J.1037.2010.00427

利用直接水冷半连续(常规DC)铸造工艺和低频电磁铸造(LFEC)工艺分别制备了Al-4.5%Cu(质量分数)合金铸锭.测量了常规DC铸造和LFEC过程中的温度曲线,研究了低频电磁场条件下的铸锭微观组织变化和Cu元素的微观偏析.通过金相观察发现,在低颜电磁场作用下,α-Al和θ相的共晶组织变得细小,其面积分数明显减小.利用电子探针测量结果绘制Cu元素成分曲线,发现在凝固的最初过渡区,Cu元素的成分曲线在低频电磁场作用下升高,α-Al中Cu元素含量增加.通过计算得到Cu元素的有效分配系数ke,发现在最初过渡区ke线性增大到1.LFEC工艺使得Cu元素的ke变大,并且随着电流强度的增强这一趋势愈发明显.由于低频电磁场加速了凝固前沿的冷却速度,使更多的Cu原子固溶在α-Al中,Cu元素在铸锭中的微观偏析得到了改善.

关键词: Al-4.5％Cu合金 , 低频电磁铸造(LFEC) , 微观偏析 , 有效分配系数