王丽
,
吴希文
,
张晨鼎
,
张通
,
简丽
,
武朝军
,
周涛
稀土
doi:10.3969/j.issn.1004-0277.1999.02.003
采用湿渣法研究了0℃时碘化钇(YI3)-乌洛托品氢碘酸盐(C6H12N4.HI)-水(H2O)的三元体系相平衡,绘制了该体系的等温溶解度相图,相图分析结果表明,该体系中有组成为YI3.C6H12N4.HI.14H2O的配合物生成,对所得配合物进行了化学分析、X-射线粉末衍射、红外光谱、差热-热重分析,测定了其密度、晶体轴性,确定了配合物结构中的配位关系.
关键词:
相平衡
,
碘化钇
,
乌洛托品氢碘酸盐
,
配合物
宁远涛
贵金属
评述了合金元素对Au的漂白效果和机制，介绍了白色开金的几种色度参数，如CIE-L a*b*色度参数和颜色盒，CIE-LAB-C-H-L米制色度参数和基于CIE-XYZ色度参数的ASTM D1925黄色指数YI，讨论了某些白色开金的色度参数与冶金学特征。基于金合金的漂白效应与合金成分的密切关系，ASTM D1925黄色指数YI为设计白色开金成分提供了基本的指南。
关键词:
金属材料
,
Au合金
,
白色开金
,
色度参数
,
色度图
徐旸
,
汪艳
,
傅轶
合成材料老化与应用
采用多次挤出的方法和氧化诱导期(OIT)方法考察了抗氧剂对聚丙烯热氧稳定性的影响,测定了各次挤出试样的熔体流动速率(MFR)、黄度指数(YI)、力学性能以及氧化诱导期(OIT).实验结果表明:添加由主抗氧剂1010和辅抗氧剂168组成的复合抗氧剂后聚丙烯的熔体流动速率(MFR)、黄度指数(YI)、拉伸强度和冲击强度、氧化诱导期(OIT)与未添加抗氧剂的聚丙烯相比降低明显减缓,说明抗氧剂可有效抑制聚丙烯的老化,延长其使用寿命.
关键词:
聚丙烯
,
抗氧剂
,
热稳定性
Physical Review B
An elastic Ising model for CoMnO(6) chain is proposed to explain the ferroelectricity induced by collinear magnetic order in Ca(3)CoMnO(6), and then a mean-field theory with interchain spin interactions based on this model is developed. With inclusion of the dynamics of polarization domains at finite temperature, we address the rationality of our theory by the good agreement of the calculated electric polarization and dielectric susceptibility with the reported data on Ca(3)Co(2-x)Mn(x)O(6) (x approximate to 0.96) [Y. J. Choi, H. T. Yi, S. Lee, Q. Huang, V. Kiryukhin, and S.-W. Cheong, Phys. Rev. Lett. 100, 047601 (2008)], a typical diatomic Ising spin chain system, while the predicted magnetic susceptibility shows some difference from experiment, the reason of which is discussed.
关键词:
calcium compounds;cobalt compounds;dielectric polarisation;ferroelectricity;Ising model;magnetic susceptibility;multiferroics;optical susceptibility;one-dimensional oxides;magnetic-properties;multiferroics;ca3co1+xmn1-xo6
余金秋
,
彭鹏
,
刁成鹏
,
吴浩
,
何华强
人工晶体学报
LaBr3 ∶Ce、LuI3 ∶Ce、SrI2 ∶Eu等新型卤化物闪烁晶体因其高光输出、高能量分辨率等优异的闪烁特性而引起人们的广泛关注.高纯无水稀土卤化物是生长上述闪烁晶体所必需的原料,但其制备困难和高昂成本,严重制约了这些晶体的发展和应用.本文报道了无水LaBr3、CeBr3、LaCl3、CeCl3、LuI3、GdI3、YI3、CeI3、EuI2等常用稀土卤化物的制备方法,并对其有效表征手段进行了介绍.
关键词:
闪烁晶体
,
稀土卤化物
,
制备
,
表征
刘守平
,
周上祺
,
王佳眉
,
任勤
腐蚀学报（英文）
用金相显微镜、扫描电镜、X射线衍射仪和X射线能谱仪对天然气井油管悬挂器腐蚀失效进行了检测分析，并对天然气井油管悬挂器用35CrMo钢进行了盐雾试验，结果表明，天然气中的水和CO2是引起腐蚀的主要介质，腐蚀产物主要是FeCO3，高速天然气冲刷和钢中的非金属夹杂加剧了腐蚀的速度.
CORROSION FAILURE ANALYSIS OF AN OIL TUBE USED IN NATURAL GAS WELL
LIU Shou-ping,ZHOU Shang-qi,WANG Jia-mei,REN Qin
Chongqing University
A failed oil tube used in natural gas well was examined by optical microscope,scanning electron microscope ,X-ray diffractometer and X-ray spectrometer.Corrosion behavior of 35CrMo steel samples of the oil tube were investigated by means of salt spray tests in the laboratory.The results show that CO2 and H2O are primary factors in the corrosion of oil tube.The corrosion product is FeCO3,non-metallic inclusions in the steel and erosion of natural gas fluid played an important role in accelerating the corrosion.
oil tube;
natural gas well；
35CrMo steel；
failure analysis；
corrosion
关键词:
悬挂器
,
null
,
null
,
null
章晓波
,
刘宁
,
袁红梅
,
荣春兰
硬质合金
doi:10.3969/j.issn.1003-7292.2008.01.002
为探究Mo、WC、ZrC对TiC-Ni系金属陶瓷组织的影响,真空烧结制备了TiC-Ni系金属陶瓷.利用X射线衍射仪(X-ray diffraction,XRD)、扫描电子显微镜(scanning electron microscope,SEM)、能谱仪(energy dispersive spectrometer,EDS)等研究了Mo、WC和ZrC对金属陶瓷显微组织的影响.结果表明,TiC基金属陶瓷的显微组织随着Mo、WC、ZrC的加入而逐渐细化.形成(Ti,Mo)C、(Ti,Zr,Mo)C、(Ti,Mo,W)C、(Ti,Zr,Mo,W)C、(Zr,Yi,Mo)C和(Zr,Ti,Mo,W)C等固溶体,并且在10%TiC-ZrC-14%Mo-15%WC-20%Ni-1%C试样中出现了无芯晶粒(corelesss grains)、微裂纹及微孔洞.断裂韧性测试结果表明.该显微结构能大大提高材料的断裂韧性.
关键词:
金属陶瓷
,
显微组织
,
微裂纹
,
断裂韧性
Synthetic Metals
Fused thiophene-split oligothiophenes were synthesized by Suzuki coupling. The relationship between the structure of these fused thiophene-split oligothiophenes and DH-6T (alpha.omega-dihexylsexithiophene) and their performance in OTFTs was discussed. The realignment of HTTfTTTH (2,5-bis-(5'-hexyl-[2,2']bithiophenyl-5-yi)-thieno[3,2-b] thiophene) molecule on the substrate after annealing was revealed by X-ray diffraction and atomic force microscopy. A similar but novel compound, TTfTTT (2,5-bis[2,2']bithiophenyl-5-yl-thieno[3.2-blthiophene), was also prepared and evaluated as an organic transistor material. Air stabilities of these three compounds in OTFT devices were affected mainly by chemical properties, but also by the ionization potentials (I(p)) of these materials. Among the three compounds, HTTfTTTH had a higher I(p) because the thiophene sequence was split by fused thiophene and the best air stability, due to the end-capping of its active a-positions by hexyl substitution. (C) 2009 Elsevier B.V. All rights reserved.
关键词:
OTFT;Fused thiophene;Oligothiophene;Ionization potential;Air;stability;thin-film transistors;field-effect transistors;high-mobility;organic;semiconductors;carrier mobility;copolymers;oligomers;performance;polymers
陈美娟
,
黄宇
,
李顺诚
催化学报
doi:10.1016/S1872-2067(16)62584-6
氮氧化物(简称NOx,包括NO和NO2等)是形成二次有机气溶胶的重要前体物,其存在会严重影响空气质量并危害人类健康.目前用于NOx的去除的方法主要有过滤、物理吸附、热催化等.然而,这些技术存在高能耗及产生二次污染等缺点,严重制约其实际应用.近年来,光催化技术作为一种有效处理NOx的环保技术,因其具备在常温下高效处理低浓度NOx(大气污染浓度水平)的优点而获得广泛关注.最近,Bi2WO6光催化剂因其独特的层状结构以及特有的催化性质,表现出良好的可见光催化性能.Bi2WO6光催化性能与催化剂的形貌及尺寸大小密切相关,目前报道的Bi2WO6的形貌有片状、颗粒状、花状、中空微球等.其中,由小纳米颗粒堆积成的中空Bi2WO6微球因其大的比表面积和高的荷质传输速率,表现出显著优于其它形貌的光催化性能.目前已有少量关于中空结构Bi2WO6微球的制备方法的报道,这些方法均需引入纳米球状的"核"作为模板,并在其上生长Bi2WO6胶体颗粒,然后去除"核",从而得到中空结构.譬如,Shang等采用碳纳米球作为"核"制备出Bi2WO6微球,再通过煅烧手段去除碳"核".Thillai与合作者用硅球作为"核",为了得到中空结构Bi2WO6微球,用NaOH将硅"核"刻蚀.然而这类方法均涉及到复杂的制备过程和高昂的运行成本.超生喷雾热分解法是一种常见的制备尺寸可控的纳米球的方法.在之前的工作中,本研究组成功使用超声喷雾热解法制备出具有优良光催化活性的Bi2WO6实心微球.我们首次加入NaCl盐为模板,使用简单的超声喷雾热分解方法制备出具有中空结构的Bi2WO6微球光催化剂,合成过程无需采用复杂的除"核"手段.一系列表征表明:该微球由直径为41?148 nm的纳米片自组装而成,并在表面形成了不均匀分布的孔结构;并对Bi2WO6中空微球的生长机制做了详细的研究,考察了所制备Bi2WO6催化剂去除NO的效率.生长机制研究结果表明,NaCl盐在中空Bi2WO6微球的形成过程中发挥着关键性作用:(1)NaCl盐溶液在超生喷雾热分解法的高温过程中形成NaCl单晶并作为"核"模板,参与中空Bi2WO6微球的形成;(2)Na+离子有助于Bi2WO6微球的微结构-纳米片的生长;(3)Cl?离子有利于Bi2WO6微球表面微孔的形成;(4)NaCl模板水洗后留下中空结构的Bi2WO6微球;(5)NaCl盐也充当着多孔诱发剂,其水洗溢出过程会造成Bi2WO6微球表面的孔结构.性能测试表明,以NaCl盐为模板所制备的中空Bi2WO6微球表现出优异的光催化性能,其在模拟太阳光下去除NO的效率是未添加模板的1.7倍、以KCl为模板的1.5倍、以Na2SO4为模板的1.2倍.BET和DRS分析表明,中空结构Bi2WO6微球具有大的比表面积和高的可见光吸收,对提高催化性能起到重要作用.ESR测试结果表明,?OH和?O2?是中空Bi2WO6微球的光催化反应过程的主要活性物种,?O2?的产生有助于提高光催化剂降解NO的耐受性.
关键词:
超声喷雾热分解
,
盐模板
,
Bi2WO6中空微球
,
NO去除
