张小明
,
殷为宏
,
王学成
稀有金属材料与工程
使用Ti和Ni的元素粉末,用自蔓延高温合成(SHS)技术制备了等原子的多孔TiNi形状记忆合金,获得的多孔样品具有规整的外形和一定的尺度及较好的孔洞连通性.测量了样品的表观密度、最大孔径和透气性能.用SEM和XRD分析了样品的孔洞特征、元素分布及相组成.结果表明,SHS法制备高孔隙度TiNi合金,产物孔隙度高达50%以上,元素化合充分、成份均匀,且工艺过程短、节省能源,是一种比较理想的制备方法.
关键词:
SHS
,
多孔材料
,
TiNi合金
X.B. Tian
,
X.F. Wang
,
A.G. Liu
,
L.P. Wang
,
S. Y. Wang
,
B. Y. Tang and P. K. Chu 1)Advanced Welding Production & Technology National Key Laboratory
,
Harbin Institute of Technology
,
Harbin 150001
,
China 2)Department of Physics & Materials Science
,
City University of Hong Kong
,
China
金属学报(英文版)
The research on plasma immersion ion implantation has been conducted for a little over ten years. Much is needed to investigate including processing technlogy, plasma sheath dynamics, interaction of plasma and surface, etc. Of the processing methods elavated temperature technique is usually used in PIII to produce a thick modified layer by means of the thermal diffusion. Meanwhile plasma ion heating is more recently developed by Ronghua Wei et al[1]. Therefore the temeperature is a critical parameter in plasma ion processing. In this paper we present the theoretical model and analysize the effect of imlantation voltage, plasma density, ion mass,etc on the temperature rise.
关键词:
plasma immersion ion implantation
,
null
,
null
夏小建
量子电子学报
doi:10.3969/j.issn.1007-5461.2009.06.010
采用Wei-Norman方法,求出含时变电压源的介观LC电路随时间演化的精确解,应用相空间准概率分布函数,研究了时变电源作用下介观LC电路相干态的量子特性,结果表明此函数是一个二维运动的Gauss波包,其中心电量和磁通呈余弦和正弦变化.
关键词:
量子光学
,
LC回路
,
介观电路
,
相干态
,
量子态演化
,
相空间的准概率分布函数
Materials Science and Technology
Sliding wear tests on SiC particle reinforced 2024 aluminium alloy composites fabricated by a powder metallurgy technique were carried out, and she effects of SiC particle content, size, and the wear load on the wear properties of the composites were systematically investigated. It was found that the weal resistance of the composites was about two orders of magnitude superior to that of the unreinforced matrix alloy, and increased with increasing SiC particle content and size. Under the conditions of sliding wear used, the effect of SiC particle size on the wear resistance was more significant than that of particle content. (C) 1996 The Institute of Materials.
关键词:
matrix composites;tribological properties;fabrication
中国腐蚀与防护学报
N。1Atmospheric Corrosivlty for Steels………………………………………………… .LIANG Caideng HO[I i。-tat（6）Caustic Stress Corrosion Cr。king of Alloy 800 Part 2.The Effect of Thiosul执e……………………………………… KONG De-sheng YANG Wu ZHAO Guo-zheng HUANG De.ltL。ZHANG Yu。。he CHEN She。g-bac（13）SERS slid E16CttOCh6iniC81 Stlldy Of Illhibit1Oli M6ch＆tllsth Of ThlollY68 Oil ITOll ID H....
关键词:
WEI Jihe Xi'an Institute of Metallurgy and Construction Engineering
,
China.
材料科学技术（英文）
The oxidation of alloying elements during the ESR of stainless steel has been studied. The model previously developed by WEI and Mitchell for the chemical reactions and mass transfer processes during ESR was applied to the remelting of the high Cr steel 1Cr18Ni9(Ti).The laboratory data for the unsteady state A.C.ESR were analyzed and dealt with by the model.When the remelting process reached a steady state,an oxidant(Fe_2O_3 powder)or a deoxidant(Ca-Si powder or metallic Ca)was added to the slag bath.The results showed that this model is applicable to the remelting of stainless steel rather precisely, and it is expected that the model may offer a reliable basis for the control of composition during practical ESR of high alloy steel. Also,the oxidation of Cr in the steel must be noticed when its content is high;but it is entirely possible to adjust the Cr content of ingot within a considerable range,using a special technique by means of the slag-metal reactions during the remelting.
关键词:
ESR
,
null
,
null
,
null
,
null
汪忠伟
,
黎波
,
辛宇尘
,
刘建国
,
姚颖方
,
邹志刚
催化学报
doi:10.1016/S1872-2067(14)60016-4
采用微波法在氨气气氛下快速加热石墨烯(G)制备了含氮量在4.05 wt%-5.47 wt%的掺氮石墨烯(NG).将上述的掺氮石墨烯用作碱性电解质条件下的氧还原电催化剂，起始还原电势为0.17 V (vs SHE)，接近商用碳载铂催化剂的0.21 V (vs SHE).采用透射电子显微镜、拉曼光谱和X射线光电子能谱研究了掺氮石墨烯的形貌、结构和掺杂氮原子的键合方式.结果发现，掺氮石墨烯的氧还原起始电位随着石墨氮原子含量的提高而上升，说明石墨类型的氮含量是影响其氧还原催化活性的关键因素.实验结果表明，微波法快速制备的掺氮石墨烯在碱性条件下表现出较高的氧还原催化活性，具有作为碱性燃料电池阴极催化剂的潜力.
关键词:
燃料电池
,
氧还原
,
起始电位
,
掺氮石墨烯
,
微波法
