张鸿冰
,
倪乐民
,
徐祖耀
金属学报
经 LFG(ΔG~(γ→a))-Mogutnov(ΔG_(Fe)~(γ→a))、徐祖耀(Shu-A)(ΔG~(γ→a))-Orr-Chipman(ΔG_(Fe)~(γ→a))、徐祖耀(Shu-B)(ΔG~(γ→a))-Orr-Chipman(ΔG_(Fe)~(γ→a))组合,均可算得 Fe-Mn-C 合金的 Ms 温度且与实验值十分符合.所得结果经数学处理,得 Fe-Mn-C 系 Ms 与成分的关系为:Ms(K)=817.4-7513.4xc-4141.9x_(Mn)-32083.5x_Cx_(Mn)(LFG)Ms(K)=829.9-7580.5x_C-4166.0x_(Mn)-15727.8x_Cx_(Mn)(SHU-A)Ms(K)=829.2-7276.1x_C-2915.4x_(Mn)-43825.7x_Cx_(Mn)(SHU-B)其线性相关系数均大于0.992.C 和 Mn 浓度均使合金的 Ms 线性地降低,而碳的作用几乎是Mn 的两倍.处理中引入了合金元素交互作用项(x_Cx_(Mn)),表明 C,Mn 相互加剧对 Ms 的影响。随含 C,Mn 量的增加,相变驱动力均单调地增加,而不存在奇异点.Ms 和相变驱动力的计算值均依赖于ΔG_(Fe)~(γ→a)项.
关键词:
F.T.Cheng
材料科学技术（英文）
The present communication addresses an interesting problem related to the indeterminacy in hardness of superelastic NiTi reported by Xu et al. The origin of the indeterminacy is attributed to the inadequacy of the conventional Vickers hardness testing measurement which does not record elastic deformation, and thus the indeterminacy may be removed with suitable techniques. Concepts of hardness in relation to deformation are clarified. Recommendations for measuring the hardness of NiTi and other elastic-plastic materials are suggested, together with comments on the advantages and disadvantages of each of these methods.
关键词:
Hardness
,
null
,
null
,
null
,
null
,
null
Jingpei XIE
,
Yaomin ZHU
,
Xiaoping WANG
材料科学技术（英文）
The M-s temperature, Delta G(gamma-->alpha), Delta G(gamma-->M) and mechanical energy under a non-severe impact loading in a medium manganese steel (Fe-7Mn-1.2C) have been calculated by means of Xu's Fe-X-C model. The relation between the yield strength of austenite and the driving force for martensite transformation has been established. It is proved that the martensite transformation can take place in a medium manganese steel (Fe-7Mn-1.2C alloy) under a non-severe impact loading.
关键词:
李莉
,
李庆芬
,
郑磊
,
徐庭栋
,
杜善义
钢铁研究学报
以工业用12Cr1MoV钢为研究对象,通过俄歇电子能谱分析方法(AES),对磷在恒温过程中的非平衡晶界偏聚浓度进行了测定.获得的磷在钢中的非平衡晶界偏聚动力学曲线直接验证了非平衡晶界偏聚动力学理论中的Xu-Song模型.
关键词:
晶界偏聚
,
临界时间
,
扩散
,
钢
Journal of Materials Processing Technology
The crystallization temperatures and other thermal properties have been measured systematically for two ternary Cu-Ni-P and two quaternary Cu-Ni-Sn-P amorphous systems. The dependence of crystallization temperature on the composition for the four alloy systems can not be described basically by the usual used Naka rule. The Gibbs free energy of crystallization can be calculated for the alloy systems with the model proposed by Shu et al. Using the calculated free energy of crystallization, it is still not possible to properly describe all of the crystallization temperatures of the alloy systems. However, it has been found that the correlation between the crystallization temperature and the content of the alloy systems can be reasonably explained by the nucleation and growth rates of a new phase for the classical theory of phase transformation. It has been established that the classical theory of phase transformation can be used to describe the thermal stability of the Cu-based amorphous alloys during their crystallization process. (C) 1999 Published by Elsevier Science S.A. All rights reserved.
关键词:
thermal stability;amorphous alloys;Cu-P based alloy systems;classical;theory of phase transformation;solid-liquid interface;structural model;glasses
盖红星
,
李建军
,
韩军
,
邢艳辉
,
邓军
,
俞波
,
沈光地
,
陈建新
量子电子学报
doi:10.3969/j.issn.1007-5461.2005.01.016
采用Shu Lien Chuang方法计算了AlInGaAs/AlGaAs应变引起价带中重、轻空穴能量变化曲线,在Harrison模型的基础上详细地计算了AlInGaAs/AlGaAs和GaAs/AlGaAs量子阱电子、空穴子能级分布并且进一步研究了这两种材料在不同注入条件下的线性光增益.进一步计算比较可以得出AlInGaAs/AlGaAs应变量子阱光增益特性要优于GaAs/AlGaAs非应变量子阱增益特性,因此AlInGaAs/AlGaAs应变量子阱半导体材料应用于半导体激光器比传统GaAs/AlGaAs材料更具优势.
关键词:
光电子学
,
应变量子阱
,
光增益
,
AlInGaAs
,
半导体激光器
陆樟献
,
龚雁
,
王渊明
,
王正才
,
陈善飞
功能材料与器件学报
doi:10.3969/j.issn.1007-4252.2012.01.005
基于Xu等人的经典振荡磁偶极子模型和Matsumoto等人给出的双折射驰豫理论,研究了磁致双折射和二向色性对磁性液体薄片的光透射率弛豫特性的影响.理论推导了磁性液体的双折射和二向色性函数的偏振光透射率具体表达式,并进行了数值模拟计算.该问题的研究对磁性液体光学各向异性的深入认识以及相关磁性液体光学器件的应用具有一定的指导意义.
关键词:
物理光学
,
双折射驰豫
,
二向色性驰豫
,
磁性液体
,
磁偶极子
