ZHANG Xiang-yu
,
HUANG Xiao-bo
,
JIANG Li
,
MA Yong
,
FAN Ai-lan
,
TANG Bin
钢铁研究学报(英文版)
Abstract： Stainless steel (SS) is not recommended to be used in hospital environments for work surfaces and door furniture due to the lack of antibacterial properties. To this end, a novel SS surface modified layer with both a quick bacterial killing rate and relatively thick has been obtained by plasma surface alloying with Cu. The microstructure, elements distribution and phase identification were analyzed by SEM, GDS, XRD and XPS. A spread plate method was adopted for evaluation of antibacterial property of specimens against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The experimental results demonstrate that the surface modified layer with the thickness of about 26 μm is uniform and dense. The layer is mainly composed of a mixture of pure Cu, expanded austenite phase and a few Fe3O4 phase. The Cu modified layer exhibits excellent antibacterial effects against E. coli and S. aureus within 1 h. No viable E. coli and S. aureus was found after 3 h (100% killed). The modified layer is relatively thick, hence it is expected that the Cu modified SS will have a durable antibacterial function.
关键词:
Key words: plasma alloying
,
Cu
,
antimicrobial
,
AISI 304 stainless steel
WANG He-feng
,
TANG Bin
,
LI Xiu-yan
钢铁研究学报(英文版)
N-doped TiO2 (N-TiO2) coatings were obtained by oxidation of titanium nitride coatings, which were prepared by the plasma surface alloying technique on stainless steel (SS). The microstructure of N-TiO2 coatings was characterized by X-ray diffraction (XRD), glow discharge optical emission spectrometry (GDOES), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM), respectively. Ball-on-disc sliding wear was applied to test and compare the tribological behaviors of the coatings and substrate. XRD patterns showed that anatase type TiO2 existed in the coatings after oxidation. GDOES showed that the resultant coatings had a layered structure, comprising of N-TiO2 layer at the top and a diffusion-type interface. Such a hybrid coatings system showed good adhesion with the substrate. According to XPS, residual N atoms partially occupied O atom sites in the TiO2 lattice. Uniform, continuous and compact coatings were observed by SEM images of coatings after oxidation. Under a load of 7.6 N, the coefficient of friction was in the range of 0.27-0.38 for the N-TiO2/Al2O3 systems and the wear rate of the coatings was only one-fourteenth of that for untreated 316L SS. N-TiO2 coatings displayed much better wear resistance and antifriction performance than SS substrate.
关键词:
plasma surface alloying technique
,
wear resistance
,
stainless steel
,
titanium dioxide
Acta Physica Sinica
Molecular dynamics (MD) simulation is performed to study the vacancy-interstitial annihilation in crystalline silicon. We choose the Stillinger-Weber potential, which is commonly used for silicon, to describe the interaction between atoms. The system is relaxed under 300K and 1400K respectively. We have found that < 111 > is the preferred recombination direction and propose the presence of an energy barrier in the < 110 > direction. From the calculated value of energy barrier along < 110 > we give a reasonable explanation for the difference between Tang's and Zawadzki's data.
关键词:
molecular dynamics;vacancy and interstitial;diffusion;point-defects;diffusion;mechanisms
赵洁
,
姚秉华
,
冯逸晨
功能材料
采用共沉淀法制备BiNbO4纳米棒。利用X射线粉末衍射仪（XRD）、透射电镜（TEM）、紫外-可见漫反射光谱（UV-Vis DRS）和热重分析（TG/DTA）对其结构、形貌和性质进行表征,并通过紫外-可见分光光度计分析BiNbO4纳米棒光降解罗丹明B来研究其光催化活性。结果表明以五氧化二铌和五水硝酸铋为原料制备得到正交相结构的BiNbO4纳米棒;BiN-bO4纳米棒具有较高的光催化活性,在紫外光下,pH值=3.05,催化剂用量为2g/L时能够有效地降解罗丹明B,降解率受到光源、催化剂浓度和溶液pH值的影响较大。
关键词:
共沉淀法
,
BiNbO4纳米棒
,
光催化
杨飒
,
郑志硕
量子电子学报
doi:10.3969/j.issn.1007-5461.2015.03.005
针对尺度不变特征变换(Scale-invariant feature transform,SIFT)算法在关键点特征描述向量阶段计算复杂并且维数较高的现象,提出了一种基于压缩感知理论的SIFT算法.通过压缩感知理论的稀疏特征表示方法,对SIFT关键点特征向量进行提取,将高维梯度导数向量降到低维稀疏特征向量,降低了关键点描述向量维度.采用欧式距离作为关键点的相似性度量, Best-Bin-First(BBF)数据结构避免穷举,使数据的运算量大为减少.实验结果表明,新算法对存在仿射变换的医学图像配准性能优于传统SIFT算法,与当前改进型的SIFT算法相比,本文算法的实时性明显增强.
关键词:
图像处理
,
图像配准
,
尺度不变特征变换
,
特征提取
,
稀疏随机投影
李伟国
,
祁超
,
刘立岩
,
赵大庆
应用化学
doi:10.3969/j.issn.1000-0518.2005.11.003
分别研究了二乙三胺五乙酸(DTPA)及2种衍生物二乙三胺五乙酸-双二甲酰胺(DTPA-BDMA)和二乙三胺五乙酸-双(异烟肼)(DTPA-BIN)对乳酸脱氢酶活性及酶促反应动力学的影响.结果表明,它们均可以抑制脱氢酶的活性,其抑制类型为竞争性的抑制作用,抑制常数分别为3.37、7.41、8.52μmol/L.紫外差谱结果表明,DTPA及其衍生物可以和酶分子作用,其羧基部分被包埋到分子内部,在酶分子的结合部位存在芳香族的氨基酸残基.DTPA与脱氢酶作用后使酶分子中的色氨酸荧光强度减弱,对酪氨酸的荧光没有明显影响.
关键词:
二乙三胺五乙酸
,
乳酸脱氢酶
,
酶学动力学
,
紫外差谱
,
荧光光谱
陈修帅
,
侯传金
,
李晴
,
刘彦军
,
杨瑞丰
,
胡向平
催化学报
doi:10.1016/S1872-2067(16)62488-9
手性2,3-二氢呋喃衍生物是一类重要的杂环化合物,广泛存在于天然产物和生物活性分子中.它们也经常被用于手性四氢呋喃化合物的不对称合成.因此,人们发展了很多合成手性2,3-二氢呋喃化合物的方法,如有机小分子催化的多米诺迈克尔-烷基化反应、“中断的”Feist-Bénary反应或改进的 Feist-Bénary反应.此外,过渡金属催化的手性2,3-二氢呋喃的不对称合成在近些年引起了人们的极大关注. Ozawa等通过 Pd-催化2,3-二氢呋喃的动力拆分方法获得了手性2-芳基-2,3-二氢呋喃. Evans发展了一种 Sc-催化联烯硅和乙醛酸乙酯的[3+2]环加成反应合成手性2,3-二氢呋喃的方法.最近, Fu和 Tang等发展了 Cu催化烯酮和重氮化合物的[4+1]环加成反应合成手性2,3-二氢呋喃的方法.在 Nishibayashi和 van Maarseveen的开创性工作之后, Cu催化的不对称炔丙基转化反应取得了很大的进展.最近,我们发展了一类新的三齿手性 P,N,N-配体,在 Cu催化不对称炔丙基取代、脱羧炔丙基取代、[3+2]、[3+3]和[4+2]环加成反应中表现出优秀的对映和非对映选择性.其中,我们发现采用 Cu催化炔丙醇酯和β-酮酯的[3+2]环加成反应,能高对映选择性地获得手性2,3-二氢呋喃.我们设想,采用β-羰基膦酸酯代替β-酮酯,通过这种 Cu催化[3+2]环加成反应,将可以合成一类具有重要生物活性的手性膦酰化2,3-二氢呋喃化合物.基于这种设想,本文使用手性 P,N,N-配体,通过 Cu催化炔丙醇酯与β-羰基膦酸酯的不对称[3+2]环加成反应,以很好的收率和最高92% ee的对映选择性获得了一系列光学活性的膦酰化2,3-二氢呋喃化合物.我们以炔丙醇酯1a与β-羰基膦酸酯2a为标准底物,优化了反应条件,考察了配体、Cu盐、碱和反应温度等对反应收率和对映选择性的影响.我们确定了最佳的反应条件：以4b为配体,以 Cu(OTf)2为铜盐,以t-BuOK为碱,以 MeOH为溶剂,–20oC反应24 h.在此条件下,我们对β-羰基磷酸酯2的适用范围进行了考察.结果表明,各种苯基取代的β-羰膦磷酸酯均能得到很好的收率和对映选择性.苯环上取代基的空间效应对反应的对映选择性影响不大,但对反应收率影响较大,与相应3-取代或4-取代底物相比较,2-取代的底物获得的收率较低.苯环对位取代基的电子效应对反应的影响不大,给电子基或吸电子基的底物,均得到了较好的收率和对映选择性.杂环取代的底物同样适用于该反应,以90%的收率和89% ee的对映选择性获得了相应的[3+2]环加成产物.对于烷基底物,虽然反应的产率略低,但是得到了高达92% ee的产物.此外,我们对炔丙醇酯底物的适用范围也进行了考察.结果表明,该体系对于各种取代的炔丙醇酯底物均可以获得较高的收率和良好的对映选择性.总之,本文发展了一种铜催化炔丙醇酯与β-羰基膦酸酯的不对称[3+2]环加成反应的方法,成功合成了手性膦酰化2,3-二氢呋喃化合物.通过使用一个结构刚性的酮亚胺三齿 P,N,N-配体,以很好的收率和最高92% ee的对映选择性获得了一系列光学活性的膦酰化2,3-二氢呋喃化合物.
关键词:
铜
,
不对称合成
,
3+2环加成
,
β-羰基膦酸酯
,
膦酰化 2,3-二氢呋喃
