MA Li-feng
,
HUANG Qing-xue
,
HUANG Zhi-quan
,
CHU Zhi-bing
,
TIAN Ya-qin
钢铁研究学报(英文版)
The purpose aims to improve the plate shearing section quality and metal yield by means of optimal blade clearance adjustment model of rolling-cut shear and accurate calculation of the maximum shearing force, as well as for the system optimization design, structure optimization design to provide important basis. A 3500 mm rolling shear of a large stainless steel factory was taken as the test object, and the blade clearance under different influence factors of the clearance value and the shearing section were tested. The optimized production accumulated data regression analysis and the rolling shear process of stainless steel shear test. The test results show that the optimal blade clearance adjustment module is a comprehensive function, which include steel plate thickness, material, temperature and shear plate volume. The shear stress at starting stage with the relative penetration depth increases affected by the above factors, and the fracture peak decreases rapidly after being cut into the roll phase constant.
关键词:
stainless steel
,
rolling-cut shear
,
blade clearance
,
shearing force
,
industrial test
宋育来
,
陈吉清
,
陈邦文
,
刘静
,
刘志勇
,
胡敏
钢铁研究
研究了集装箱用SM490YA钢板的力学性能、工艺性能、微观组织结构等.采用气体保护焊对钢板进行焊接性能试验评价,并对钢的强韧化机理进行初步探讨.结果表明,SM490YA钢板不仅性能稳定,不存在明显的各向异性,易于成型,而且钢板焊接性能优良,是制造集装箱的理想钢板.
关键词:
集装箱钢
,
力学性能
,
工艺性能
,
焊接性能
,
微观组织
林元华
,
张中太
,
张枫
,
唐子龙
,
吕霄
,
郑子山
功能材料
利用SrCO3-A12O3-RE(NO3)3(RE:Eu,Dy)粉体为原料,加入少量酒精,进行预混合、球磨、干燥.将此混合粉体在还原气氛下高温烧成,最终制得不同发光性能的xSrO.yAl2O3:RE(RE:Eu,Dy)光致发光材料,并对其性能进行了研究.发光粉体的发射光谱表明,随着A12O3/SrO(摩尔比x)的增加,其相应粉体发射光谱的主峰位置(λE)逐渐向短波方向移动,符合λE=531.018-23.028X关系式.余辉衰减曲线表明,这些发光材料均具有一定的长余辉特性.从而说明只要控制一定的Al2O3/SrO比例,即可获得发光颜色为紫色到绿色的多种发光材料.对于其长余辉机制,认为是加入的Dy3+起到了陷阱能级的作用,它将部分空穴俘获,并在热扰动下,慢慢将空穴释放出来,并再次与介稳态Eu1+复合发光,从而达到延长余辉的作用.
关键词:
长余辉
,
发光材料
,
发射光谱
,
空穴
胡海龙
,
曾宇平
,
左开慧
,
夏咏锋
,
姚冬旭
无机材料学报
doi:10.15541/jim20140181
分别以Y2O3-Al2O3(YA)和Y2O3-MgO(YM)为烧结助剂，采用气压烧结工艺制备了Si3N4/SiC陶瓷，研究了两种不同的烧结助剂对陶瓷的力学和摩擦性能的影响。研究结果表明：添加不同种类的烧结助剂对制备陶瓷的相对密度、抗弯强度、断裂韧性、硬度、摩擦系数和磨损率影响很大；与添加烧结助剂YM相比较，添加烧结助剂YA的Si3N4/SiC陶瓷在烧结过程中表现出了更好的烧结性能，得到的陶瓷样品最终显示了更好的力学和摩擦性能，尤其是SiC添加量为20wt%的Si3N4/SiC陶瓷。这主要归因于烧结助剂YA的添加使Si3N4/SiC陶瓷呈现出了更高的相对密度，获得的晶粒长径比更小。
关键词:
Si3N4/SiC陶瓷
,
烧结助剂
,
抗弯强度
,
摩擦性能
席俊华
,
季振国
,
刘坤
,
王超
,
杜鹃
无机材料学报
doi:10.3724/SP.J.1077.2006.01506
利用溶胶-凝胶法结合高温热处理在硅衬底上制备了掺Mn硅酸锌薄膜, 用XRD、SEM、UV-Vis吸收谱和PL谱测试了样品的结晶性能与光学性能, 并分析了热处理温度对掺Mn硅酸锌薄膜的结晶性能和光学性能的影响. 实验结果发现, ZnO的适量存在对掺Mn薄膜的发光有增强作用. 进一步的分析认为, 这一现象的机理可由G.G. Qin提出的量子约束-发光中心 (QCLC) 模型进行解释, ZnO中受激发的电子和空穴通过隧穿效应到达硅酸锌基体中复合发光, 从而增强发光强度.
关键词:
硅酸锌
,
ZnO
,
photoluminescence
,
quantum confinement-luminescence center
Materials Research Bulletin
Through analysis of the latest experimental results reported in the literature and obtained in our laboratory, we have extended our previous quantum confinement/luminescence center model for the photoluminescence mechanism of porous Si and of nanometer-silicon-particle-embedded Si oxide films (G.G. Qin and Y.Q. Jia, Solid State Commun. 86, 559 (1993)). We consider that there are three main types of competitive photoexcitation/photoemission processes and that the process in which photoexcitation occurs in the nanometer silicon particles (NSPs) while photoemission occurs in the luminescence centers (LCs) in the SiOx layers very close to the NSPs is usually the major one. We discuss under what conditions the other two types of processes will dominate. We believe that the extended quantum confinement/luminescence center model is a physical model that is suitable for the photoluminescence from silicon oxide films embedded with NSPs or nanometer Ge particles (NGPs), as well as from oxidized porous Si. (C) 1999 Elsevier Science Ltd.
关键词:
oxides;luminescence;defects;blue-light emission;visible luminescence;optical-properties;nanocrystals;mechanism;dependence;sio2-films;absorption;spectra;defects
Physical Review B
In response to the comment by Wang and Qin, we have rewritten our equation (22) following the coordinate system of Dina, et al. [J. Wuhan Univ. (Nature Science Edition) 3, 23 (1992)]. According to the thermodynamic stability condition and the experiment of Capitan et al., we have chosen the new parameters of the phason elastic constants. Based on this, we have recalculated the coefficients of the expressions on the vibrational denty of states and the specific heat of the icosahedral Al-Nin-Pd quasicrystal. Our results are still in agreement with the experimental data measured by Walti et al. [Phys. Rev. B 57, 10 504 (1998)]. It demonstrates that our method is useful for dealing with the low-temperature vibrational excitation of icosahedral quasicrystals.
关键词:
quasi-crystals;diffuse-scattering
席俊华
,
季振国
,
刘坤
,
王超
,
杜鹃
无机材料学报
doi:10.3321/j.issn:1000-324X.2006.06.038
利用溶胶-凝胶法结合高温热处理在硅衬底上制备了掺Mn硅酸锌薄膜,用XRD、SEM、UV-Vis吸收谱和PL谱测试了样品的结晶性能与光学性能,并分析了热处理温度对掺Mn硅酸锌薄膜的结晶性能和光学性能的影响.实验结果发现,ZnO的适量存在对掺Mn薄膜的发光有增强作用.进一步的分析认为,这一现象的机理可由G.G.Qin提出的量子约束-发光中心(QCLC)模型进行解释,ZnO中受激发的电子和空穴通过隧穿效应到达硅酸锌基体中复合发光,从而增强发光强度.
关键词:
硅酸锌
,
氧化锌
,
光致发光
,
量子约束-发光中心
