材料期刊网

Texture of Cold Rolled Strip of Fe-3Si Steel Produced by Thin Slab Casting and Rolling

LI Chang-sheng , YANG Hua , WANG Yan-fang , YU Yong-mei

钢铁研究学报(英文版)

The hot rolled strip of Fe-3Si steel was experimentally produced by thin slab casting and rolling (TSCR) process in the laboratory. The texture evolution rule was investigated during hot rolling and cold rolling. The texture distribution of cold rolled strips with four kinds of cold rolling reduction schedules was observed through X-ray diffraction method, and the orientation density variation of 1/16 layer, 1/8 layer, 1/4 layer, and 1/2 layer in thickness was analyzed. The cold rolled texture of steel A with four kinds of cold rolling reduction schedules was mainly composed of α and γ fibers. Cold rolling reduction ratio of 70% was more beneficial for obtaining more γ fibers. The γ fiber texture orientation density of {111}<011> and {111}<1 12> was the largest on the 1/8 layer and 1/4 layer and the least on the 1/16 layer and 1/2 layer for steel B. The texture orientation density of {001}-{223}<110> in the α fibers for steel C was increased, but the texture orientation density of {332}-{110}<110> was low.

关键词: silicon steel , texture , hot rolling , cold rolling , thin slab , continuous casting , direct rolling

Two-step magnetization in a spin-chain system on the triangular lattice: Wang-Landau simulation

Physical Review B

The Wang-Landau algorithm is used to study the thermodynamic and magnetic properties of triangular spin-chain system based on two-dimensional Ising model in order to understand the magnetic-order dynamics in Ca(3)Co(2)O(6) compound. The calculated results demonstrate that the equilibrium state of the rigid spins produces the two-step magnetization curve at low temperature even when the random-exchange term is considered. This work indicates that the four-step magnetization behavior observed experimentally must be due to the nonequilibrium magnetization.

关键词: calcium compounds;exchange interactions (electron);Ising model;magnetisation;thermodynamics;one-dimensional ca3co2o6;density-of-states;compound ca3co2o6;phase-diagram;proteins;crystal

Ion sputter erosion in metallic glass-A response to "Comment on: Homogeneity of Zr(64.13)Cu(15.75)Ni(10.12)Al(10) bulk metallic glass" by L-Y. Chen, Y-W. Zeng, Q-P. Cao, B-J. Park, Y-M. Chen, K. Hono, U. Vainio, Z-L. Zhang, U. Kaiser, X-D. Wang, and J-Z Jiang J. Mater. Res. 24, 3116 (2009)

Journal of Materials Research

The morphology of the dark and bright regions observed by transmission electron microscopy for the Zr(64.13)Cu(15.75)Ni(10.12)Al(10) bulk metallic glass strongly depends on the ion beam parameters used for ion milling. This indicates that the ion beam could introduce surface fluctuation to metallic glasses during ion milling.

关键词: room-temperature

Cu-Zr/ZrN薄膜体系的电阻率和纳米压入研究

白宣羽 , 汪渊 , 徐可为

稀有金属材料与工程

采用磁控溅射方法在Si(111)基片上沉积Cu-Zr/ZrN薄膜体系作为扩散阻挡层.通过比较Cu-Zr/ZrN薄膜体系和三元非晶(Mo,Ta,W)-Si-N的电阻率,同时比较Cu-Zr/ZrN薄膜体系和Ta,YaN的硬度,说明作为扩散阻挡层的材料的选取,应从整体性能上考虑,而不能仅仅考虑热稳定性等单一指标.

关键词: 非晶 , 电阻率 , 纳米压入 , 硬度

New criteria of glass forming ability, thermal stability and characteristic temperatures for various bulk metallic glass systems

Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing

Six mathematical criteria used for quantitatively measuring their glass forming ability, thermal stability and characteristic temperatures (temperature of glass transition T-g, crystallization onset T-x and liquidus T-l) of various bulk metallic glasses (BMGs) have been proposed in this article. It is found that the criteria are suitable for evaluating these quantities for BMGs. The estimated results are better than those calculated by Fang et al.'s models and Lu et al.'s gamma criterion, but our analyses indicate that these criteria, defined by the data (Pauling electronegativity xi, atomic radius ri, electron concentration ni and melting temperature T-mi) easily found in literatures, still need to be further refined in future research for shortcomings of the parameters. (C) 2007 Elsevier B.V. All rights reserved.

关键词: bulk metallic glasses;glass forming ability;thermal stability;supercooled liquid regions;mechanical-properties;amorphous-alloys;transition temperature;bond parameters;strength;binary;widths;ag

Effect of interstitial hydrogen on cohesive strength of Al grain boundary with Mg segregation

材料科学技术（英文）

The effect of interstitial hydrogen on the cohesion of the Al Sigma=11(113) grain boundary (GB) is investigated based on the thermodynamic model of Rice-Wang using the first-principles density function calculation. The results indicate that interstitial H behaves as an embrittler from "strengthening energy" analysis. The reduced GB cohesion due to the presence of H at the GB is attributed to the low affinity between H and Al, and the weakened bonding of Al atomic pairs perpendicular to GB plane.

关键词: hydrogen;grain boundary;Al-Mg alloys;pseudopotentials;1st-principles

Effect of Interstitial Hydrogen on Cohesive Strength of Al Grain Boundary with Mg Segregation

Xiaoguang LIU , Xiaowei WANG

材料科学技术（英文）

The effect of interstitial hydrogen on the cohesion of the Al ∑=11(113) grain boundary (GB) is investigated based on the thermodynamic model of Rice-Wang using the first-principles density function calculation. The results indicate that interstitial H behaves as an embrittler from "strengthening energy" analysis. The reduced GB cohesion due to the presence of H at the GB is attributed to the low affinity between H and Al, and the weakened bonding of Al atomic pairs perpendicular to GB plane.

关键词: Hydrogen , null , null

Studies of the g factors and the local structure for Ni3+in LaAl0.9Ni0.1O3, La0.75Y0.25Al0.99Ni0.01O3 and YAl0.9Ni0.1O3

Radiation Effects and Defects in Solids

The electron paramagnetic resonance g factors and the local structure for Ni3+ in LaAl0.9Ni0.1O3 (LAN), La0.75Y0.25Al0.99Ni0.01O3 (LYAN) and YAl0.9Ni0.1O3 (YAN) are theoretically studied from the perturbation formulas of the g factors for a 3d7 ion of low spin (S = 1/2) in tetragonally elongated octahedra. In these formulas, the contributions to the g factors from the tetragonal distortion, characterized by the tetragonal field parameters Ds and Dt are taken into account. According to the calculations, the ligand octahedra around Ni3+ are suggested to suffer 2% relative elongation along the [001] (or C4) axis due to the Jahn-Teller effect.

关键词: defect structures;electron paramagnetic resonance;crystal-fields and;spin Hamiltonians;Ni3+;LaAlO3;LaYAlO3;YAlO3;atomic screening constants;optical-spectra;paramagnetic-resonance;superconducting tapes;lattice-distortions;superposition model;scf;functions;cr3+ ions;crystals;epr

非微扰QCD和核遮蔽效应对K因子的影响

智海素 , 侯召宇

原子核物理评论 doi:10.3969/j.issn.1007-4627.2006.01.002

考虑非微扰量子色动力学物理真空夸克凝聚效应,计算了碳核与碳核在质心系能量分别为630和200 GeV时碰撞Drell-Yan过程的K因子,以及加入核遮蔽因子后非微扰效应对K因子的影响,并把计算结果与没有考虑夸克凝聚非微扰效应的K值进行了对比.结果表明,非微扰效应和核遮蔽效应对K因子影响很小.

关键词: K因子 , Drell-Yan过程 , 夸克凝聚 , 非微扰量子色动力学 , 核遮蔽效应

First-principles study on the effect of Mn and N on the cohesion of a gamma-iron grain boundary

Physical Review B

By use of the linear-combination-of-atomic-orbital (LCAO) method for a cluster model, we studied the electronic structure of gamma-from Sigma 11 [1 (1) over bar0](11 (3) over bar) grain boundary doping with N and Mn atoms. The effect of the segregation on the cohesion of the grain boundary is investigated based on the Rice-Wang thermodynamic model. It is found that N could not only largely enhance the cohesion of the grain boundary but also eliminate the detrimental effect of Mn. The cosegregation effect of Mn and N on the cohesion of the grain boundary depends on where they segregate. Nitrogen could be reliably used in alloyed steels as an efficient strengthening element.

关键词: electronic-structure;phosphorus segregation;stainless-steel;embrittlement;austenite;nitrogen;boron;impurities;fracture;metals