Z.H.Jiang 1)
,
Y.He 2)
,
X.L.Jiang 1)
,
G.J.Han 1) and S.S.Rui 1) 1) Department of Iron & Steel Metallurgy
,
School of Material and Metallurgical Science
,
Northeastern University
,
Shenyang 110006
,
China 2) Institute of Metal Research
,
The Chinese Academy of Sciences
,
Shenyang 110015
,
China
金属学报(英文版)
The thermal conductivities of different typical species filling materials for sliding gate systems for steel ladles were measured using a hot wire technique, and the relationships between thermal conductivity and temperature were regressed. The factors affecting thermal conductivity were analyzed by using variance analysis for a perpendicular experiment. The effects of thermal conductivity on sliding gate free tapping were studied, and it was revealed that decreasing the thermal conductivity of the filling materials is beneficial in enhancing the rate of free tapping for sliding gates.
关键词:
filling materials
,
null
,
null
,
null
冯文天
,
马新文
,
朱小龙
,
张少峰
,
刘惠萍
,
李斌
,
闫顺成
原子核物理评论
利用反应显微成像谱仪对70和100 keV He2+与He原子碰撞转移电离(TI)过程中不同出射角度的电子能谱进行了测量,观测到出射电子能谱具有如下分布特征:出射电子速度分布介于0和入射离子速度νp之间;在不同出射角度电子能谱分布均有一极大值存在,随着出射角度的增大,能谱分布极大值逐渐减小; 当电子出射角度等于45°时,多数电子集中在0 eV附近.上述特征可由低能离子-原子碰撞"准分子"模型进行定性解释.在100 keV He2+-He转移电离出射电子能谱中有靶电子被俘获至散射离子连续态(electron capture to continuum,简称ECC)电子的贡献,这可看做是动力学两步过程的作用.
关键词:
反应显微谱仪
,
转移电离
,
ECC电子
,
"准分子"模型
Science and Technology of Welding and Joining
The effect of the shielding gas concentration on the weld shape was studied for the moving bead on plate TIG welding of SUS304 stainless steel under He-O-2 mixed shielding. The small addition of oxygen to the helium base shielding gas can precisely control the oxygen content in a liquid pool and the weld shape. Oxygen is a surface active element for stainless steel. When the oxygen content in the liquid pool is above the critical value of similar to 70 ppm, the weld shape suddenly changes from a wide shallow type to a deep narrow one due to the change in the Marangoni convection from the outward to inward direction on the liquid pool surface. Weld shape variations influenced by the welding parameters including welding speed, welding current and electrode tip work distance under pure He and He-0.4%O-2 mixed gas shielding were systematically investigated. The investigation results showed that the final shape of the TIG weld depends to a large extent on the pattern and magnitude of the Marangoni convection on the pool surface, which is governed by the combined effect of the oxygen content in a liquid pool, temperature coefficient of the surface tension (d sigma/dT) and the temperature gradient on the pool surface (dT/dr, r is the radius of the weld pool surface). It is considered that the change in welding parameters alters the temperature distribution and gradient on the pool surface, and thus, affects the magnitude of the Marangoni convection and final weld shape.
关键词:
TIG welding (GTAW);weld shape;oxygen;helium;Marangoni convection;welding parameters;marangoni convection;oxide fluxes;tungsten arc;activating flux;stainless-steel
Journal of Nuclear Materials
Due to its inert reactivity with almost elements, He-3 produced from tritium decay has extremely detrimental effects on the tritide. To refrain from this He-3-induced damage, an efficient way is to increase the stability of He-3 in metal tritide by alloying. Using a first-principles discrete variational method in two cluster models, one for a low He-3 concentration and the other for a high He-3 concentration, the authors study the alloying effect of 3d and 4d transition metals on the stability of He-3 in TiT2 system. It is found that the preferring and metastable sites of He-3 are affected by He-3 concentration : He-3 prefers to stay at original tetrahedral interstitial site when He-3 concentration is low but moves to octahedral site when He-3 concentration is high enough. A criterion of alloying effect is proposed, according to which Nb, Y, Zr, Pd, Ru, Tc, Rh, Cr, Mo and Ag are suggested to be the beneficial alloying elements for increasing the stability of He-3 in the alloyed TiT2 with a low He-3 concentration and Y, Nb, Mo, Zr, Cr, Tc, Ru, Rh and Cu for that with a high He-3 concentration. Our results of alloying effect are supported by the positron annihilation spectroscopy (PAS) measurements for He-implanted Ti, TiMoYAl and TiZrYAl films. (c) 2006 Elsevier B.V. All rights reserved.
关键词:
electronic population analysis;molecular wave functions;hydrogen;storage alloys;intermetallic hydride;bubble formation;iron clusters;helium;tritides;lcao;overlap
丁兆勇
,
孙保民
,
刘远超
,
许秉浩
人工晶体学报
在用热解火焰法合成碳纳米管(carbon nanotubes, CNTs)过程中,CO、H2和He流量对产物种类以及CNTs的产量、结构、管径、管长等有显著影响.为了确定CO、H2和He流量的具体影响,通过固定其他实验条件,仅改变CO、H2和He流量,用扫描电子显微镜(SEM)和高分辨率透射电子显微镜(HR-TEM)对合成的产物进行表征,分析得到合成CNTs较好的CO、H2和He流量分别为0.4 L/min,0.3 L/min和0.2 L/min.
关键词:
碳纳米管
,
流量
,
热解火焰
,
SEM
,
TEM
ZHANG Lei WANG Peixuan TAO Rong MA Ruzhang ZHANG Guoguang University of Science and Technology Beijing
,
Beijing
,
China professor
,
Department of Materials Physics.University of Science and Technology Beijing.Beijing 100083
,
China
金属学报(英文版)
Nucleation and growth of He bubbles at different annealing temperatures T≤1023 K in stain- less steels HR-2 and SS321,implanted with He~+(40-70 keV.1×10~(16)-6× 10~(17) He~+/cm~2),were ohserved under TEM.T=0.45T_m seems to be a transition temperature.The He bubbles continue mainly their nucleation at 0.3T_m< T<0.45T_m,and grow predominantly at T≥0.45T_m,due probably to migration and coalescence by surface diffusion of metal atoms around the bubbles.The apparent activation energies for the growth are found to he 0.41 and 0.31 eV for HR-2 and SS321 respectively.The bubble density in HR-2 is greater than that in SS321 within whole measuring temperature range,and the onset temperature of rapid swelling is also higher.It is believed that the resistance of HR-2 to He is superior to that fo SS321.
关键词:
stainless steel
,
null
,
null
,
null
,
null
谢波
,
翁葵平
,
侯建平
,
夏修龙
,
李毅
,
古梅
材料导报
doi:10.11896/j.issn.1005-023X.2014.20.030
氢同位素在分子筛上的吸附分离行为是一重要的科学及工程基础问题.针对He/H2/HD与5A分子筛这一体系,综合应用Langmuir-Freundlich吸附等温线方程、空隙填充吸附模型和理想吸附溶液理论,初步描述了He/H2/HD体系在5A分子筛上的吸附分离行为.结果表明:在忽略He吸附的情况下,采用不同方式获得H2/HD体系的吸附等温线虽有差异,但趋势一致;在相同温度下,5A分子筛中每种组分的饱和吸附量是相同的,与组分种类无关;分离因子的计算结果显示,低温循环色谱法分离浓缩H2/D2体系、HD/D2体系和HT/H2体系是完全可行的.
关键词:
吸附
,
分离
,
分子筛
,
氢同位素
李悦
,
邓爱红
,
刘莉
,
王康
,
谢莎
材料研究学报
利用x射线衍射(xRD)和慢正电子束分析(SPBA)技术研究高温退火后含He钛膜的微观结构和钛膜内He相关缺陷的演化.XRD分析表明,高温退火后Ti和Si在高温下发生反应形成稳定的多晶TiSi2化合物,He原子的掺入会影响TiSi2晶体的择优取向,而对TiSi2晶粒尺寸的影响较小.SPBA结果表明,室温下,钛膜内的缺陷浓度或尺寸会随着掺He浓度的增加而增大;高温退火后,当He浓度小于5％(原子分数,下同)时(除2％外),钛膜内的He相关缺陷浓度随着He浓度增加相应地增加.当He浓度增加到14％时,高温会使较高浓度的He原子、He-空位复合体以及小He泡迁移聚集形成一些尺寸较大He泡,而较大He泡周围与He相关的小尺寸缺陷的浓度则会发生相应地减少.
关键词:
金属材料
,
含He钛膜
,
直流磁控溅射
,
He相关缺陷
,
XRD
,
SPBA
尹君
,
岳古明
,
徐贲
量子电子学报
doi:10.3969/j.issn.1007-5461.2006.02.015
使用脉冲Nd:YAG四倍频激光抽运充有纯D2气体和D2/He混合气体的拉曼池.实验研究了受激拉曼散射的能量转换效率和能量稳定性与系统主要参量,包括抽运光能量、D2气体压强和加入惰性气体He的关系.实验表明,适量惰性气体He的加入在没有降低一阶斯托克斯散射光(S1,波长:289.04 nm)能量稳定性的前提下,有利于提高其能量转换效率,最大能量转换效率达到22.1%.通过实验分析,得到了受激拉曼散射一阶斯托克斯散射光的能量转化效率和能量稳定性的优化条件.
关键词:
非线性光学
,
受激拉曼散射
,
四波混频
,
能量转换效率
,
能量稳定性
