Y.X. Hu
,
Z.Q. Yao
金属学报(英文版)
Finite element method is presented to attain the numerical simulation of residual stresses field in the material treated by laser shock processing. The distribution of residual stresses generated by single laser shock with square and round laser spot is predicted and validated by experimental results. With the FEM model, effects of different overlapping rates and impact sequences on the residual stresses distribution are simulated. And the results indicate that: (1) Overlapping laser shock can increase the compressive residual stresses. But it is not effective on the growth of plastically affected depth; (2) Overlapping rate should be optimized and selected carefully for the large area treatment. Appropriate overlapping rate is beneficial to obtain a homogeneous residual stress field; (3) Impact sequence has a great effect on the residual stress field. It can greatly attenuate the phenomenon of “residual stress hole” to obtain a homogeneous residual stress field.
关键词:
Laser shock processing
,
null
,
null
,
null
Applied Physics Letters
The effect of nonmagnetic Y partial substitution at the Dy site in Dy(1-x)Y(x)MnO(3) up to x=0.2 on magnetism, specific heat, and ferroelectricity is investigated, which resulted in a preliminary multiferroic phase diagram. It is revealed that the Y partial substitution suppresses the Dy-spin ordering point (T(Dy)) and ferroelectric ordering point (T(FE)) but enhances the Mn-spin ordering point (T(N)). The interaction between the spins of Dy and Mn is remarkably affected by Y substitution. The measured electrical polarization depends on the Y substitution in a complex way because the ferroelectricity is sensitive to the interaction between the spins of Dy and Mn. (c) 2011 American Institute of Physics. [doi: 10.1063/1.3536506]
关键词:
ferroelectricity;polarization
材料科学技术（英文）
The glass-forming ability (GFA) of Nd(70-x)Fe(20)Al(10)Y(x) and Nd(60-x)Fe30Al(10)Y(x) (0 less than or equal to x less than or equal to15) alloys produced by Cu mold casting was investigated. Except Y = 5 at. pct, bulk amorphous Nd(70-x)Fe(20)Al(10)Y(x) alloys up to 2 mm in diameter were obtained. The GFA for Nd(60-x)Fe(30)Al(10)Y(x) alloys, however, was found to decrease with increase of Y due to the increasing compositional deviation from the original eutectic point of Nd(60)Fe(30)Al(10) alloy. The Nd(60)Fe(20)Al(10)Y(10) and Nd(60)Fe(30)Al(10) alloy exhibit the largest GFA and can be cast into bulk amorphous cylindrical specimens of 3 mm in diameter. The melting temperature or/and the reduced crystallization temperature is closely related to the GFA of Y-containing alloys. The bulk amorphous cylinder for the Nd(55)Fe(20)Al(10)Y(15) alloy shows a distinct glass transition temperature and a wide supercooled liquid region before crystallization. The crystallization temperature, T(g), and the supercooled liquid region, DeltaT(x), are 776 K and 58 K, respectively, The GFA and thermal stability of the Nd-Fe-Al-Y alloys were discussed.
关键词:
Nd-based alloys;glass forming ability;liquidus temperature;thermal;stability;supercooled liquid region;bulk amorphous-alloys;metallic glasses;transition temperature;thermal-stability;atomic size;ni alloys;cu;alloys;diameter;tm
Physica B-Condensed Matter
The magnetic properties and magnetocaloric effect of Tb(1-x)Y(x)CoC(2) (x = 0, 0.1, 0.2, 0.3, 0.4) compounds have been investigated systematically. All the compounds undergo second-order transitions from paramagnetic to ferromagnetic states without thermal and magnetic hysteresis. With increasing Y content from 0 to 0.4, the Curie temperatures decrease nearly linearly from 28 to 18 K. The nature of the second-order phase transitions can be confirmed by Arrott plots. For Tb(0.6)Y(0.4)CoC(2) compound, the maximum value of the magnetic entropy change -Delta S(M) at 20 K is 9.35 J kg(-1) K(-1) for an external field change of 5T (5.14 J kg(-1) K(-1) for 2T). The large reversible magnetic entropy change makes Tb(0.6)Y(04)CoC(2) compound an attractive candidate for the application at hydrogen liquefaction temperature. (C) 2010 Elsevier B.V. All rights reserved.
关键词:
Curie temperature;Magnetocaloric effect;Magnetic properties;ac susceptibility
Materials Letters
The dynamic hysteresis in a planar X-Y model as a function of frequency and amplitude of external field, at a temperature far below its Curie point, is studied by means of Monte Carlo (MC) method. The evolution of hysteresis dispersion is simulated in details and the earlier proposed scaling on the hysteresis dispersion is confirmed in the present system. It is predicted that the unique characteristic time for domain reversal is inversely proportional to the field amplitude once the amplitude is not very small. (C) 2002 Elsevier Science B.V. All rights reserved.
关键词:
dynamic hysteresis;scaling;planar X-Y model;kinetic ising-model;magnetic hysteresis;phase-transition;films
Journal of Physical Chemistry C
We report the electrical, thermal, magnetic, and thermoelectric properties of Y-doped Ca(3)Co(4)O(9) from 300 down to 5 K. The results indicate that with Y doping, the increase of resistivity originates from the decreases of carrier concentration and mobility, while the increase of Seebeck coefficient is caused by the reduction of carrier concentration together with the enhanced electronic correlation. Point-defect scattering, is the dominant thermal transport mechanism in this system. Due to the considerable difference in mass between Y(3+) and Ca(2+), thermal conductivity is observably suppressed by doping. The substitution of Y also disturbs the interlayer ferrimagnetic coupling. The ground state of this System converts front ferrimagnetism to paramagnetism gradually. The alteration of transport properties of Ca(3-x)Y(x)Co(4)O(9) reveals two Crossovers: the transition from Fermi-liquid-like metal to thermally activated semiconductor occuring at x approximate to 0.25, and the transition from thermally activated semiconductor to two-dimensional variable range hopping semiconductor occurring at x approximate to 0.5. The optimal thermoelectric response In Ca(3-x)Y(x)Co(4)O(9) is found to exist only at the critical state after which the doping-induced metal-insulator transition takes place. Oil the basis of these experimental results, a possible phase diagram for Ca(3-x)Y(x)Co(4)O(9) is proposed.
关键词:
temperature thermoelectric properties;giant magnetoresistance;solid-solutions;conductivity;electron;system;ca3co4o9+delta;thermopower;crystals;behavior
Ieee Transactions on Magnetics
The spin orientation and spontaneous magnetostriction of multicomponent TbxDy1-x-yPry(Fe0.9B0.1)(1.93) (0.10 less than or equal to x less than or equal to 0.25, 0.30 less than or equal to y less than or equal to 0.60) Laves phases were studied by step-scanning their (440) X-ray diffraction lines. The easy magnetization direction (EMD) of the Laves phases changed from the (100) to (111) axis when x was increased from 0.10 to 0.25. With increasing y, the EMD of Tb0.15Dy0.85-yPry(Fe0.9B0.1)(1.93) and Tb0.2Dy0.8-yPry(Fe0.9B0.1)(1.93) Laves phases reoriented from the (100) to (111) axis. The magnetostriction coefficient lambda(111) of TbxDy1-x-yPry(Fe0.9B0.1)(1.93) Laves phases increased with increasing x (or y) when y (or x) was kept constant.
关键词:
Laves phases;magnetostriction;spin orientation;X-ray diffraction;anisotropy compensation;alloys
王君
,
邹家桂
,
陈政标
,
高建武
,
刘彦坤
,
张杰元
,
宋莎
绝缘材料
为解决苯乙烯和甲基苯乙烯在VPI浸渍树脂应用于风力发电机中的不足，采用不饱和聚酯亚胺、引发剂和无挥发活性稀释剂研制出116HU聚酯亚胺无挥发浸渍树脂，并对其各项性能进行了研究。结果表明：116HU聚酯亚胺无挥发浸渍树脂的常规性能满足风力发电机的要求，其耐热等级可达H级。用该树脂浸渍的风电模拟线棒具有优异的介电性能、耐湿热交变和高低温循环冲击性能及耐盐雾性能等，能满足风力发电机在极端环境运行的要求。
关键词:
聚酯亚胺
,
无挥发
,
VPI
,
风力发电机
,
耐湿热
,
耐盐雾
