CHEN Shu-ying
,
YUE Xu-dong
,
JIN Guang-can
,
LI Qing-chun
,
CHANG Guo-wei
钢铁研究学报(英文版)
The behavior of inclusions in the process of δ-phase growth during the solidification of Fe-015C-08Mn steel was in-situ observed using a high-temperature confocal scanning laser microscope (HTCSLM). The results show that inclusions arrive the S/L (solid/liquid) interface by way of direct impact or gradual drift, when the cell spacing is approximately equal to 177 μm during the growth of cellular δ-phase. The inclusions easily stay at the positions of trailing vortex formed by the circumferential motion of molten steel around δ-phase. Some inclusions reaching the S/L interface are captured by the solid-phase. Some of them move along the normal direction of the S/L interface because of pushing of solid-phase, and the others get away from the S/L interface after being pushed for a distance. The faster the growth rates of the solid-phase are, the easier the inclusions are captured by the S/L interface. The slower the growth rates of the solid-phase are, the easier the inclusions move with the S/L interface.
关键词:
inclusion
,
in-situ observation
,
carbon steel
,
solidification process
,
behavior
CHANG Guo-wei
,
CHEN Shu-ying
,
LI Qing-chun
,
YUE Xu-dong
,
JIN Guang-can
钢铁研究学报(英文版)
Abstract： Growth process of δ-phase was studied during the solidification of carbon steel. Through analyzing the solute diffusion around cylindrical crystals in the melt, the mathematic representation of lateral growth rate of cylindrical crystals was confirmed; the calculation and analysis of lateral growth rate were carried out. In order to validate the theoretical calculation and analysis, the growth process of δ-phase during the solidification was in-situ observed using a confocal scaning laser microscope (CSLM) and the growth rates were measured through CSLM images. The results show that lateral growth rates of δ-phase in the carbon steel first rapidly decrease with the increase of the radius of the cylindrical crystal, and then slowly fall down or maintain invariable. The radius of δ-phase is the primary factor to affect the growth rate. The higher the temperature gradient is, the bigger the growth rate is. However, the effect of the temperature gradient is feeble. Good correlation is obtained between theoretical analysis and experiment results in absolute values of lateral growth rate and change rule.
关键词:
Key words: cell growth
,
solidification process
,
carbon steel
,
in-situ observation
Physical Review B
In a recent publication [S. Dong et al., Phys. Rev. Lett. 103, 127201 (2009)], two (related) mechanisms were proposed to understand the intrinsic exchange bias present in oxides heterostructures involving G-type antiferromagnetic perovskites. The first mechanism is driven by the Dzyaloshinskii-Moriya interaction, which is a spin-orbit coupling effect. The second is induced by the ferroelectric polarization, and it is only active in heterostructures involving multiferroics. Using the SrRuO(3)/SrMnO(3) superlattice as a model system, density-functional calculations are here performed to verify the two proposals. This proof-of-principle calculation provides convincing evidence that qualitatively supports both proposals.
关键词:
thin-films;weak ferromagnetism;superlattices;anisotropy;bifeo3;srruo3;model
F.T.Cheng
材料科学技术（英文）
The present communication addresses an interesting problem related to the indeterminacy in hardness of superelastic NiTi reported by Xu et al. The origin of the indeterminacy is attributed to the inadequacy of the conventional Vickers hardness testing measurement which does not record elastic deformation, and thus the indeterminacy may be removed with suitable techniques. Concepts of hardness in relation to deformation are clarified. Recommendations for measuring the hardness of NiTi and other elastic-plastic materials are suggested, together with comments on the advantages and disadvantages of each of these methods.
关键词:
Hardness
,
null
,
null
,
null
,
null
,
null
Jingpei XIE
,
Yaomin ZHU
,
Xiaoping WANG
材料科学技术（英文）
The M-s temperature, Delta G(gamma-->alpha), Delta G(gamma-->M) and mechanical energy under a non-severe impact loading in a medium manganese steel (Fe-7Mn-1.2C) have been calculated by means of Xu's Fe-X-C model. The relation between the yield strength of austenite and the driving force for martensite transformation has been established. It is proved that the martensite transformation can take place in a medium manganese steel (Fe-7Mn-1.2C alloy) under a non-severe impact loading.
关键词:
李莉
,
李庆芬
,
郑磊
,
徐庭栋
,
杜善义
钢铁研究学报
以工业用12Cr1MoV钢为研究对象,通过俄歇电子能谱分析方法(AES),对磷在恒温过程中的非平衡晶界偏聚浓度进行了测定.获得的磷在钢中的非平衡晶界偏聚动力学曲线直接验证了非平衡晶界偏聚动力学理论中的Xu-Song模型.
关键词:
晶界偏聚
,
临界时间
,
扩散
,
钢
陆樟献
,
龚雁
,
王渊明
,
王正才
,
陈善飞
功能材料与器件学报
doi:10.3969/j.issn.1007-4252.2012.01.005
基于Xu等人的经典振荡磁偶极子模型和Matsumoto等人给出的双折射驰豫理论,研究了磁致双折射和二向色性对磁性液体薄片的光透射率弛豫特性的影响.理论推导了磁性液体的双折射和二向色性函数的偏振光透射率具体表达式,并进行了数值模拟计算.该问题的研究对磁性液体光学各向异性的深入认识以及相关磁性液体光学器件的应用具有一定的指导意义.
关键词:
物理光学
,
双折射驰豫
,
二向色性驰豫
,
磁性液体
,
磁偶极子
Journal of Materials Research
Based on the best bulk metallic glass (BMG) forming alloy in the Mg-Cu-Y ternary system, we introduced Ag (or Ni) to partially substitute for Cu to improve the glass-forming ability (GFA). The objective of this paper is twofold. First, we illustrate in detail a recently developed search strategy, which was proposed but only briefly outlined in our previous publication [H. Ma, L.L. Shi, J. Xu, Y. Li, and E. Ma: Discovering inch-diameter metallic glasses in three-dimensional composition space. Appl. Phys. Lett. 87, 181915 (2005)]. The protocol to navigate in three-dimensional composition space to land large BMGs is spelled out step-by-step using the pseudo-ternary Mg-(Cu,Ag)-Y as the model system. Second, our ability to locate the best BMG former in the composition tetrahedron allows us to systematically examine, and conclude on, the effects of a given alloying element. The large improvement in glass-forming ability in the Mg-(Cu,Ag)-Y system relative to the based ternary will be contrasted with the reduced glass-forming ability in the Mg-(Cu,Ni)-Y pseudo ternary system. It is demonstrated that the improvement of glass-forming ability requires judicious choice of substitutional alloying elements and concentrations, rather than simple additions of multiple elements assuming the "confusion principle."
关键词:
bulk metallic-glass;shaped copper mold;amorphous-alloys;thermal-stability;ternary-system;casting method;p system;diameter;zr;mm
