中国腐蚀与防护学报
N。1Atmospheric Corrosivlty for Steels………………………………………………… .LIANG Caideng HO[I i。-tat（6）Caustic Stress Corrosion Cr。king of Alloy 800 Part 2.The Effect of Thiosul执e……………………………………… KONG De-sheng YANG Wu ZHAO Guo-zheng HUANG De.ltL。ZHANG Yu。。he CHEN She。g-bac（13）SERS slid E16CttOCh6iniC81 Stlldy Of Illhibit1Oli M6ch＆tllsth Of ThlollY68 Oil ITOll ID H....
关键词:
许传龙
,
王式民
工程热物理学报
在加压密相气力输送实验装置上获得了不同操作条件下煤粉颗粒静电波动信号,并用Hilbert-Huang变换、功率谱进行分析.结果表明:随着表观速度的增加,静电波动信号主峰值的频率增大;静电波动信号希尔伯特-黄变换(Hilbert-Huang)揭示了气固两相流静电信号的非线性和非平稳特征,随气固两相流颗粒相浓度降低和颗粒及表观速度增加,静电波动信号特征尺度由高尺度(低频)向低尺度(高频)转移.多尺度分析有助于认识气固两相流动形态及其转变规律.
关键词:
颗粒静电
,
静电传感器
,
气-固两相流
,
Hilbert-Huang变换
Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing
Monocrystalline copper samples with [001] and [221] orientations were subjected to shock/recovery experiments at 30 and 57 GPa and 90 K. The slip system activity and the microstructural evolution were investigated. Different defect structures, including dislocations, stacking faults, twins, microbands, and recrystallized grains were observed in the specimens. The residual microstructures were dependent on crystalline orientation and pressure. The differences with crystalline orientations are most likely due to different resolved shear stresses on specific crystalline planes. The geometric relationships between the shock propagation direction and crystalline orientation are presented under uniaxial strain. It is shown that the [2 2 11 orientation, by virtue of having fewer highly activated slip systems, exhibits greater concentration of deformation with more intense shear on the primary system. This, in turn leads to greater local temperature rise and full recrystallization, in spite of the thermodynamic residual temperature of similar to 500 K and rapid cooling (within 20 s) to ambient temperature. The profuse observation of microbands is interpreted in terms of the mechanism proposed by Huang and Gray [J.C. Huang, G.T. Gray III, Acta Metallurgica 37 (1989) 3335-3347]. (C) 2009 Elsevier B.V. All rights reserved.
关键词:
Shock compression;Shock loading;Slip bands;Microtwins;Microbands;strain rate history;single-crystals;grain-size;constitutive;description;plastic-deformation;mechanical response;deformed metals;loaded nickel;substructure;recrystallization
王浩
,
刘国权
,
秦湘阁
金属学报
采用Potts模型Monte Carlo方法对3种现存的三维个体晶粒长大速率拓扑依赖性
方程进行了仿真验证. 结果表明, Rivier速率方程认为晶粒
体积变化率dVf/dt与晶粒面数f成线性关系, 与仿真
结果明显不符, 不适用于描述三维晶粒长大过程的动力
学. 当晶粒面数f≥8时, Yu-Liu速率方程和
MacPherson-Srolovitz速率方程均与仿真结果很好吻合,
表明这两者均可以用来定量描述三维晶粒长大过程的动力学；当
f＜8时, 这两个方程均与仿真结果有显著差异.
关键词:
三维晶粒长大
,
topology-dependent grain growth rate equation
王浩
,
刘国权
,
秦湘阁
金属学报
doi:10.3321/j.issn:0412-1961.2008.01.003
采用Potts模型Monte Carlo方法对3种现存的三维个体晶粒长大速率拓扑依赖性方程进行了仿真验证.结果表明,Rivier速率方程认为晶粒体积变化率dVf/dt与晶粒面数,成线性关系,与仿真结果明显不符,不适用于描述三维晶粒长大过程的动力学.当晶粒面数f≥8时,Yu-Liu速率方程和MacPherson-Srolovitz速率方程均与仿真结果很好吻合,表明这两者均可以用来定量描述三维晶粒长大过程的动力学;当f<8时,这两个方程均与仿真结果有显著差异.
关键词:
三维晶粒长大,拓扑依赖性长大速率方程,Potts模型,Monte Carlo仿真
李文琳
,
李章炜
,
幸七四
,
张扬
贵金属
膜片开关用银浆制备使用的有机体系中，树脂、溶剂和添加剂对产品的性能和有害元素控制有重要的意义。经对比实悚，以热塑性聚酯为主体树脂，以MEA混合溶剂为溶剂，以YU-201、硅烷偶联剂以及自制增强塑性材料M-17材料为混合添加剂，制成有机载体。使用该载体制备出的浆料符合膜片开关银浆性能要求，且满足欧盟RoHS指标卤素控制要求。
关键词:
复合材料
,
环保型
,
无卤素
,
膜片开关
,
银浆
