材料期刊网

Processing of a Novel Zn Alloy Micro-Tube for Biodegradable Vascular Stent Application

Wang Chang , Yu Zhentao , Cui Yajun , Zhang Yafeng , Yu Sen , Qu Gongqi , Gong Haibo

材料科学技术（英文） doi:10.1016/j.jmst.2016.08.008

In recent years, zinc based alloys as a new biodegradable metal material aroused intensive interests. However, the processing of Zn alloys micro-tubes (named slender-diameter and thin-walled tubes) is very difficult due to their HCP crystal structure and unfavorable mechanical properties. This study aimed to develop a novel technique to produce micro-tube of Zn alloy with good performance for biodegradable vascular stent application. In the present work, a processing method that combined drilling, cold rolling and optimized drawing was proposed to produce the novel Zn-5Mg-1Fe (wt%) alloy micro-tubes. The micro-tube with outer diameter of 2.5?mm and thickness of 130?μm was fabricated by this method and its dimension errors are within 10?μm. The micro-tube exhibits a fine and homogeneous microstructure, and the ultimate tensile strength and ductility are more than 220?MPa and 20% respectively. In addition, the micro-tube and stents of Zn alloy exhibit superior in vitro corrosion and expansion performance. It could be concluded that the novel Zn alloy micro-tube fabricated by above method might be a promising candidate material for biodegradable stent.

关键词: Zn alloy , Micro-tube , Biodegradable stent , Mechanical properties , Dimensional accuracy , In vitro corrosion performance

Professor XU Zhong-yu and his research activities

新型炭材料

关键词:

Preface to Special Issue on Photocatalysis for celebrating the 20th anniversary of Professor Jimmy C. Yu’s return to Hong Kong and leading photocatalytic research there

催化学报 doi:10.1016/S1872-2067(15)61006-3

关键词:

Improved Nonlinear Equation Method for Numerical Prediction of Jominy EndQuench Curves

SONG Yuepeng , LIU Guoquan , LIU Shengxin , LIU Jiantao , FENG Chengming

钢铁研究学报(英文版)

Without considering the effects of alloying interaction on the Jominy endquench curves, the prediction results obtained by YU Baihai′s nonlinear equation method for multialloying steels were different from those experimental ones reported in literature. Some alloying elements have marked influence on Jominy endquench curves of steels. An improved mathematical model for simulating the Jominy endquench curves is proposed by introducing a parameter named alloying interactions equivalent (Le). With the improved model, the Jominy endquench curves of steels so obtained agree very well with the experimental ones.

关键词: Jominy endquench curve;nonlinear equation method;alloying interaction parameter;computer simulation

1998 COMPREHENSIVE TABLE OF CONTENTS

中国腐蚀与防护学报

N。1Atmospheric Corrosivlty for Steels………………………………………………… .LIANG Caideng HO[I i。-tat（6）Caustic Stress Corrosion Cr。king of Alloy 800 Part 2.The Effect of Thiosul执e……………………………………… KONG De-sheng YANG Wu ZHAO Guo-zheng HUANG De.ltL。ZHANG Yu。。he CHEN She。g-bac（13）SERS slid E16CttOCh6iniC81 Stlldy Of Illhibit1Oli M6ch＆tllsth Of ThlollY68 Oil ITOll ID H....

关键词:

三维晶粒长大速率方程的大尺度Potts模型Monte Carlo仿真验证

王浩 , 刘国权 , 秦湘阁

金属学报

采用Potts模型Monte Carlo方法对3种现存的三维个体晶粒长大速率拓扑依赖性 方程进行了仿真验证. 结果表明, Rivier速率方程认为晶粒 体积变化率dVf/dt与晶粒面数f成线性关系, 与仿真 结果明显不符, 不适用于描述三维晶粒长大过程的动力 学. 当晶粒面数f≥8时, Yu-Liu速率方程和 MacPherson-Srolovitz速率方程均与仿真结果很好吻合, 表明这两者均可以用来定量描述三维晶粒长大过程的动力学；当 f＜8时, 这两个方程均与仿真结果有显著差异.

关键词: 三维晶粒长大 , topology-dependent grain growth rate equation

三维晶粒长大速率方程的大尺度Potts模型Monte Carlo仿真验证

王浩 , 刘国权 , 秦湘阁

金属学报 doi:10.3321/j.issn:0412-1961.2008.01.003

采用Potts模型Monte Carlo方法对3种现存的三维个体晶粒长大速率拓扑依赖性方程进行了仿真验证.结果表明,Rivier速率方程认为晶粒体积变化率dVf/dt与晶粒面数,成线性关系,与仿真结果明显不符,不适用于描述三维晶粒长大过程的动力学.当晶粒面数f≥8时,Yu-Liu速率方程和MacPherson-Srolovitz速率方程均与仿真结果很好吻合,表明这两者均可以用来定量描述三维晶粒长大过程的动力学;当f<8时,这两个方程均与仿真结果有显著差异.

关键词: 三维晶粒长大,拓扑依赖性长大速率方程,Potts模型,Monte Carlo仿真

环保型无卤素膜片开关银浆有机成份的选型研究

李文琳 , 李章炜 , 幸七四 , 张扬

贵金属

膜片开关用银浆制备使用的有机体系中，树脂、溶剂和添加剂对产品的性能和有害元素控制有重要的意义。经对比实悚，以热塑性聚酯为主体树脂，以MEA混合溶剂为溶剂，以YU-201、硅烷偶联剂以及自制增强塑性材料M-17材料为混合添加剂，制成有机载体。使用该载体制备出的浆料符合膜片开关银浆性能要求，且满足欧盟RoHS指标卤素控制要求。

关键词: 复合材料 , 环保型 , 无卤素 , 膜片开关 , 银浆

曳力和湍流对超临界水流化床传热特性的影响

吕友军 , 董旭斌 , 张天宁

工程热物理学报

本文采用基于颗粒动力学的欧拉双流体模型,对比研究了曳力和湍流对超临界水流化床传热特性的影响,选取了Gidaspow、Syamlal-O'Brien和Wen-Yu三种曳力模型以及标准κ-ε、RNG κ-ε、Realizable κ-ε湍流模型三种高Re数湍流模型及低Re数κ-ε湍流模型.研究结果表明,在三种曳力模型中,Gidaspow曳力模型在超临界水流化床中更为适用;对于所采用的四种κ-ε湍流模型,利用三种高雷诺数湍流模型模拟所得床层与壁面间传热系数基本一致且大于采用低雷诺数模型模拟所得传热系数,而综合考虑,RNGκ-s湍流模型更适于超临水流化床传热特性的研究.

关键词: 超临界水流化床 , 曳力 , 湍流 , 传热

云南高钛渣流态化氯化冷态模型数值模拟

朱奎松 , 刘松利 , 芶淑云 , 王梁

钢铁钒钛 doi:10.7513/j.issn.1004-7638.2017.02.005

基于欧拉-双流体模型和流态化氯化临界流化速度经验公式,结合云南高钛渣物性参数,研究了其流态化氯化的初始流化速度下高钛渣流态化氯化特性、气泡运动对床层的扰动、气泡大小与分布板位置关系.研究结果表明:Grace方程能准确预测B类颗粒窄粒径的高钛渣流态化氯化气泡行为,Wen-Yu方程预测的初始流化速度下乳相和气泡出现时间延后;完全流化速度下,通过上升、合并长大、破裂过程,在分布板位置形成气泡;通过钛渣固体矢量图得出,整个床层以气泡为分界,气泡上升对上、下部颗粒的流动产生影响,导致床层不均匀.

关键词: 四氯化钛 , 高钛渣 , 氯化 , 流化床 , 数值模拟 , 流动特性