材料期刊网

Effect of Basicity and Alumina-Silica Ratio on Formation of Silico-Ferrite of Calcium and Aluminum

ZHANG Fang , AN Sheng-li , LUO Guo-ping , WANG Yi-ci

钢铁研究学报(英文版)

Abstract： Baivumebo iron ore is special magnetite containing fluorine, kalium and sodium elements, and the main raw material for ironmaking of Baotou Iron and Steel (Group) Co. The effects of basicity and ratio of Al2O3 to SiO2 (A/S) on the formation of silico-ferrite of calcium and aluminium (SFCA) in Baivumebo low silica sinters were studied by means of mini-sintering, XPF-500 optical mineralogical microscope and CSS-88000 electronic universal testing machine. The results show that it is beneficial to the formation of complex calcium ferrite to enhance the basicity of Baivumebo low silica sinters. The acicular SFCA-I was increased with the enhancing basicity and reached the peak at basicity 28, then the columnar or platy SFCA formed and the bonding strength decreased. Alumina is beneficial to the formation of acicular complex calcium ferrite in Baivumebo low silica sinters. But the residual unfused Al2O3 reagent came into being when A/S was 035, while complex calcium ferrite still remained to be acicular. There is a common rule about mineralogy components affected by basicity and ratio of A/S, that is, SFCA is increasing accompanied with hematite and porosity reduced, but the content of glass phase is stable.

关键词: Key words: Baivumebo iron concentrates , Baivumebo low silica sinter , SFCA , basicity , alumina-silica ratio

Formation Characteristics of Calcium Ferrite in Low Silicon Sinter

WANG Yi-ci , ZHANG Jian-liang , ZHANG Fang , LUO Guo-ping

钢铁研究学报(英文版)

Influence of sintering temperature, basicity and MgO content on the formation characteristics of calcium ferrite in low silicon sinter of Baotou Iron and Steel Company was studied by means of mini-sintering test and mineralographic microscope analysis. In addition, the suitable sintering parameters such as temperature and basicity were explored. The results found that optimum temperature for the formation of calcium ferrite is 1280 ℃, the basicity of 25-28 is helpful to the development of acicular or columnar calcium ferrite, and MgO content in the low silicon sintering raw materials should be lower than 28% because MgO can intensively inhibit the formation of calcium ferrite. And calcium ferrite in the sinter belongs to calcium ferrite with low calcium, which is different from that in ordinary sinter at home and abroad. So, it provided theoretical basis for promoting formation of calcium ferrite in low silicon sinter and improving properties of sinter.

关键词: low silicon sinter , formation characteristics , calcium ferrite , sintering temperature , basicity

Jian ZHANG/Langhong Lou

材料科学技术（英文）

关键词:

Ion sputter erosion in metallic glass-A response to "Comment on: Homogeneity of Zr(64.13)Cu(15.75)Ni(10.12)Al(10) bulk metallic glass" by L-Y. Chen, Y-W. Zeng, Q-P. Cao, B-J. Park, Y-M. Chen, K. Hono, U. Vainio, Z-L. Zhang, U. Kaiser, X-D. Wang, and J-Z Jiang J. Mater. Res. 24, 3116 (2009)

Journal of Materials Research

The morphology of the dark and bright regions observed by transmission electron microscopy for the Zr(64.13)Cu(15.75)Ni(10.12)Al(10) bulk metallic glass strongly depends on the ion beam parameters used for ion milling. This indicates that the ion beam could introduce surface fluctuation to metallic glasses during ion milling.

关键词: room-temperature

Broer-Kaup-Kupershmidt方程的新精确解

杨立娟 , 杨琼芬 , 杜先云

量子电子学报 doi:10.3969/j.issn.1007-5461.2012.02.003

CK方法是求解非线性发展方程的一种有效的直接方法.利用推广的CK方法,求得(2+1)维Broer-Kaup-Kupershmidt方程的Backlund公式,从而获得方程的大量新的精确解,推广了Xu和Zhang的结果.

关键词: 非线性发展方程 , Broer-Kaup-Kupershmidt方程 , 精确解 , CK方法 , Backlund变换

Three-dimensional (3D) Ising universality in magnets and critical indices at fluid-fluid phase transition

Phase Transitions

Experimental data for critical exponents in some magnetic materials are compared with recent theoretical results on the three-dimensional (3D) Ising model, as derived by one of us (ZDZ) based on two conjectures [Z.D. Zhang, Conjectures on the exact solution of three-dimensional (3D) simple orthorhombic Ising lattices, Phil. Mag. 87 (2007), pp. 5309-5419]. It is found that critical exponents in some bulk magnetic materials indeed form a 3D Ising universality. Our attention is then focused on the critical indices at fluid-fluid phase transition. We suggest to use Zhang's exponent = 3/8 to fit the experimental data over the wider asymptotic region near the critical point of a fluid-fluid phase transition. The 3D Ising universality should exist for critical indices in a certain class of magnets and at fluid-fluid phase transition.

关键词: magnetically ordered materials;fluid-fluid;phase transitions;order-disorder effects;ferromagnetic curie temperature;liquid critical phenomena;x-ray-scattering;critical exponents;critical-point;coexistence;curves;binary-solutions;ionic-solutions;behavior;equation

Response to the Comment on 'Conjectures on exact solution of three-dimensional (3D) simple orthorhombic Ising lattices'

Philosophical Magazine

The error of Equation (15b) in my article [Z.D. Zhang, Phil. Mag. 87 (2007) p.5309] in the application of the Jordan-Wigner transformation does not affect the validity of the putative exact solution, since the solution is not derived directly from that equation. Other objections of Perk's comment [J.H.H. Perk, Phil. Mag. 89 (2009) p.761] are the same as those in Wu et al.'s comments [F.Y. Wu et al., Phil. Mag. 88 (2008) p.3093; p.3103], which do not stand on solid ground and which I have sought to refute in my previous response [Z.D. Zhang, Phil. Mag. 88 (2008) p.3097]. The conjectured solution can be utilized to understand critical phenomena in various systems, whereas the conjectures are open to rigorous proof.

关键词: 3D Ising model;exact solution;conjecture;critical phenomena;ferromagnetism;magnetic phase transition;model;analyticity

New criteria of glass forming ability, thermal stability and characteristic temperatures for various bulk metallic glass systems

Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing

Six mathematical criteria used for quantitatively measuring their glass forming ability, thermal stability and characteristic temperatures (temperature of glass transition T-g, crystallization onset T-x and liquidus T-l) of various bulk metallic glasses (BMGs) have been proposed in this article. It is found that the criteria are suitable for evaluating these quantities for BMGs. The estimated results are better than those calculated by Fang et al.'s models and Lu et al.'s gamma criterion, but our analyses indicate that these criteria, defined by the data (Pauling electronegativity xi, atomic radius ri, electron concentration ni and melting temperature T-mi) easily found in literatures, still need to be further refined in future research for shortcomings of the parameters. (C) 2007 Elsevier B.V. All rights reserved.

关键词: bulk metallic glasses;glass forming ability;thermal stability;supercooled liquid regions;mechanical-properties;amorphous-alloys;transition temperature;bond parameters;strength;binary;widths;ag

不同掺杂的钇系-123薄膜磁通特性

张鹰子 , 王志 , 向建勇 , 闻海虎

低温物理学报 doi:10.3969/j.issn.1000-3258.2005.z1.087

我们在磁场中分别测量了最佳掺杂的YBa2Cu3O7-δ、钙0.2掺杂的Y1-xCaxBa2Cu3O7-δ及钙0.5掺杂的Pr1-xCaxBa2Cu3O7-δ薄膜的电阻温度关系.利用最近Zhang et al. [Phys. Rev. B 71(2005), 052502 ]提出的热激活能的分析方法对薄膜的磁通特性进行了分析、比较与讨论.

关键词: Y-123薄膜 , 涡旋特性 , 激活能

1998 COMPREHENSIVE TABLE OF CONTENTS

中国腐蚀与防护学报

N。1Atmospheric Corrosivlty for Steels………………………………………………… .LIANG Caideng HO[I i。-tat（6）Caustic Stress Corrosion Cr。king of Alloy 800 Part 2.The Effect of Thiosul执e……………………………………… KONG De-sheng YANG Wu ZHAO Guo-zheng HUANG De.ltL。ZHANG Yu。。he CHEN She。g-bac（13）SERS slid E16CttOCh6iniC81 Stlldy Of Illhibit1Oli M6ch＆tllsth Of ThlollY68 Oil ITOll ID H....

关键词: