WANG Tao
,
XIAO Hong
,
ZHAO Tie-yong
,
QI Xiang-dong
钢铁研究学报(英文版)
In order to simulate and analyze hot strip crown and flatness accurately and efficiently, the 3-D (three-dimensional) coupled model involved in RPFEM (rigid-plastic finite element method) is improved based on the analytical model of forecasting rolling force distribution. In the analytical model, variational method is employed to solve the lateral flow of metal and influential function method is employed to calculate roll deflection, the lateral distribution of rolling force can be obtained rapidly by iterative strategy. Then the 3-D coupled model uses the result as initial distribution of rolling force to calculate roll deflection and makes the initial on-load roll gap profile close to the final value, so as to reduce iterations and increase efficiency. Compared with previous algorithms, the improved model can reduce the iterations by about 50% and shorten the computing time by about 60% on the basis of the calculation accuracy.
关键词:
rolling force
,
analytical model
,
RPFEM
,
coupled model
,
efficiency
Ximiao PAN
,
Zhanpeng JIN
材料科学技术（英文）
The phase equilibrium relations of the ternary Ni-Cr-Zr system at 900°C have been investigated by means of diffusion triple and electron probe microanalysis (EMPA) techniques. A series of tie lines and triangles have been determined, and the corresponding tentative isothermal section is presented based on the current information.
关键词:
Nickel
,
null
,
null
,
null
中国腐蚀与防护学报
N。1Atmospheric Corrosivlty for Steels………………………………………………… .LIANG Caideng HO[I i。-tat（6）Caustic Stress Corrosion Cr。king of Alloy 800 Part 2.The Effect of Thiosul执e……………………………………… KONG De-sheng YANG Wu ZHAO Guo-zheng HUANG De.ltL。ZHANG Yu。。he CHEN She。g-bac（13）SERS slid E16CttOCh6iniC81 Stlldy Of Illhibit1Oli M6ch＆tllsth Of ThlollY68 Oil ITOll ID H....
关键词:
Europhysics Letters
Noncollinear magnetic investigations of the ground state in PrFeAsO have been performed by the density-functional theory. We calculated the total energy and made structure optimization, and the electronic density of states of PrFeAsO was analyzed. There are three different magnetic structures in PrFeAsO defined by experiments. Based on these magnetic structures, we studied four collinear and four noncollinear cases. The ground state is found to take the ordering proposed by Zhao, in which the FeAs plane is of stripe antiferromagnetism and Pr spins are perpendicular to Fe spins. The electronic density of states indicates that for PrFeAsO the increase of the electron Coulomb interaction leads to a decrease in conductivity. Copyright (C) EPLA, 2011
关键词:
high-temperature superconductivity;phase-diagram;oxypnictides;instability
Journal of Alloys and Compounds
The subsolidus phase relations in the ZnO-MoO3-B2O3, ZnO-MoO3-WO3 and ZnO-WO3-B2O3 ternary systems have been investigated by the means of X-ray powder diffraction (XRD). There is no ternary compound in all the systems. There are five binary compounds and five tie lines in the ZnO-MoO3-B2O3 system. This system can be divided into six 3-phase regions. There are three binary compounds and three tie lines in the ZnO-MoO3-WO3 system. This system can be divided into four 3-phase regions. There are four binary compounds and four tie lines in the ZnO-WO3-B2O3 system. This system can be divided into five 3-phase regions. The possible component regions for ZnO single crystal flux growth were discussed. The phase diagram of Zn3B2O6-ZnWO4 pseudo-binary system has been constructed, and the result reveals this system is eutectic system. The eutectic temperature is 1007 degrees C and eutectic point component is 70 mol% Zn3B2O6. (c) 2007 Elsevier B.V. All rights reserved.
关键词:
ZnO-MoO3-B2O3;ZnO-MoO3-WO3;ZnO-WO3-B2O3;Zn3B2O6-ZnWO4;phase relation;zno single-crystals;zinc oxide;growth;moo3-wo3
Surface & Coatings Technology
In order to reduce the high brittleness of laser clad Fe-B coatings, the composite Fe-Ti-B coating was developed by laser cladding with a powder mixture of B4C and Fe-Ti alloy. The microstructure, hardness and cracking resistance of these coatings were investigated in this paper. The experimental work enables the following findings to be reached: (i) the needle-like TIE, whiskers could be synthesized in situ using the laser cladding method in the composite Fe-Ti-B coating. (ii) The size, shape and volume fractions of TiB2 whiskers in the composite coating are greatly dependent upon powder compositions (contents of B, Ti elements and the ratio of B/Ti elements) and the laser energy density used. The average ratio of width/length for the synthesized TiB2 whiskers increases with increasing laser energy density and ratio of B/Ti elements in this coating. (iii) Both the hardness and cracking resistance of the Fe-B laser clad coating could be improved by the formation of TIE, whiskers. (C) 2001 Elsevier Science B.V. All rights reserved.
关键词:
TiB2;laser cladding;coating;steel;microstructure;powders
Haihua LIU
金属学报(英文版)
doi:10.1016/S1006-7191(08)60120-9
A novel method was reported to measure the remnant magnetic field in Lorentz mode in a FEI Tecnai F20 transmission electron microscope equipped with a Lorentz lens. The movement of the circle Bloch line of the cross-tie wall in Permalloy is used to measure the remnant magnetic field by tilting the specimen and adjusting the objective lens current. The remnant magnetic field is estimated to be about 17 Oe, in a direction opposite to that of the objective lens magnetic field. The remnant magnetic field can be compensated by adjusting the value of the objective lens current.
关键词:
Lorentz electron microscopy
,
Lorentz lens
,
remnant magnetic field
,
Permalloy
,
cross-tie walls
刘建国
,
安振涛
,
张倩
,
杜仕国
,
姚凯
,
王金
材料导报
doi:10.11896/j.issn.1005-023X.2017.04.030
为评估氧化剂硝酸羟胺的热稳定性,使用标准液体铝皿于3 K/min、4 K/min、5 K/min加热速率下进行热分析.借助非等温DSC曲线的参数值,应用Kissinger法和Ozawa法求得热分解反应的表观活化能和指前因子,根据Zhang-Hu-Xie-Li公式、Hu-Yang-Liang-Xie公式、Hu-Zhao-Gao公式以及Zhao-Hu-Gao公式,计算硝酸羟胺的自加速分解温度和热爆炸临界温度,并对热分解机理函数进行了研究.设计了7条热分解反应路径,采用密度泛函理论B3LYP/6-311++G(d,p)方法对硝酸羟胺的热分解进行了动力学和热力学计算.计算结果表明,硝酸羟胺热分解的自加速分解温度TsADT=370.05 K,热爆炸临界温度Te0=388.68K,Tbp0=397.54 K,热分解最可几机理函数的微分形式为f(a) =17×(1-α)18/17.硝酸羟胺热分解各路径中,动力学优先支持路径Path 6、Path 5、Path 4和Path 1生成NO和NO2,其次是Path 2、Path 7和Path 3生成N2和N2O.温度在373 K以下时,Path 1'反应无法自发进行,硝酸羟胺无法进行自发的热分解.从热力学的角度来看,硝酸羟胺在370.05K以下储存是安全的.
关键词:
硝酸羟胺
,
热分析
,
热稳定性
,
热分解机理
,
密度泛函理论
汤清虎
,
赵培真
,
张庆红
,
王野
催化学报
分别采用模板剂离子交换法(TIE法)、水热合成法(DHT法)及浸渍法合成了Co-MCM-41,此催化剂能够在无共还原剂存在条件下催化以氧气为氧化剂的烯烃环氧化反应. 另外考察了催化剂的结构特别是钴的存在状态与催化性能之间的关系,以期能够弄清催化环氧化反应中催化剂活性位的本质. X射线衍射及N2吸附-脱附等结果证实,当导入分子筛中的钴的量在2.2%以下时,所有的Co-MCM-41均具有规整排列的六方孔道结构. 漫反射光谱和H2程序升温还原等结果表明,通过TIE法合成的样品中钴主要以孤立态钴离子(single-site Co(Ⅱ))形式存在,而以DHT法合成的样品中钴主要以微晶态Co2SiO4形式存在,浸渍法合成的样品中则存在大量颗粒状氧化钴. 催化反应结果表明,当钴含量均接近1.0%时,采用 TIE法合成的样品的苯乙烯转化率为45%,而用DHT法和浸渍法合成的样品的苯乙烯转化率均低于30%. 考虑到氧化钴和Co2SiO4的低活性以及DHT法和浸渍法合成样品中可能存在一小部分孤立态钴离子,我们推测MCM-41中的孤立态钴离子是催化活化分子氧发生环氧化反应的高效活性位.
关键词:
钴
,
MCM-41分子筛
,
孤立态钴
,
硅酸钴离子
,
氧化钴
,
苯乙烯
,
氧气
,
环氧化
Journal of Alloys and Compounds
The subsolidus phase relations of the ternary system ZnO-V(2)O(5)-WO(3) was investigated by means of Xray diffraction (XRD) analysis. The phase relations had been constructed. Five binary compounds, five tie lines and six three-phase regions were determined in this system. The possible component regions for ZnO single crystal flux growth were discussed. The phase diagram of Zn(4)V(2)O(9)-ZnWO(4) pseudo-binary system from 740 degrees C to 1300 degrees C was also determined through XRD and differential thermal analysis (DTA) methods. DTA results indicated this system was a eutectic system, and the eutectic temperature was 880 degrees C and eutectic point component was 78 mol% Zn(4)V(2)O(9) and 22 mol% ZnWO(4). The compounds composed of 78 mol% Zn(4)V(2)O(9) and 22 mol% ZnWO(4) might be suitable flux for ZnO crystal growth. (C) 2008 Elsevier B.V. All rights reserved.
关键词:
ZnO-V(2)O(5)-WO(3) system;Zn(4)V(2)O(9)-ZnWO(4) pseudo-binary system;Crystal growth;ZnO semiconductor;Phase relation;single-crystals;v2o5-zno system;diagram;znv2o6
