ZHENG Lei
,
ZHANG Maicang
,
DONG Jianxin
,
MENG Ye
钢铁研究学报(英文版)
The observations given by Ohtani et al are analyzed in the present paper and it is concluded that the kinetics of temper embrittlement in titanium-doped low carbon NiCr steel agree well with those of non-equilibrium grain-boundary segregation of Sb. Besides, the mechanism of non-equilibrium grain-boundary segregation of Sb is determined to be the most satisfactory one among the existed mechanisms in the literature to interpret the Sb-induced embrittlement kinetics in the NiCr steel. Based on the conclusion and the determination, the activation energy and frequency factor of diffusion of Sb-vacancy complexes are obtained for the first time according to the concept of critical time in non-equilibrium grain-boundary segregation theory. The calculated results can give theoretical basis for predicting and controlling over the Sb-induced embrittlement in steels.
关键词:
grain-boundary segregation;temper embrittlement;critical time;diffusion activation energy
ZHENG Lei
,
YUAN Ze-xi
,
SONG Shen-hua
,
XI Tian-hui
,
WANG Qian
钢铁研究学报(英文版)
Austenite grain sizes in the heat affected zone (HAZ) of a high heat input welded Zr-Ti bearing microalloyed steel are measured under different welding conditions simulated by a Gleeble-1500 thermal-mechanical simulator. The austenite grain growth is divided into two regimes in terms of temperature. When the temperature is lower than 1250 ℃ where the pinning effect of precipitates is strong, the austenite grain size increases slowly with increasing peak temperature, but it increases drastically when the temperature is higher than 1250 ℃ where the pinning effect of precipitates is weak. Based on the experimental measurements, an analytical model for predicting the austenite grain size in the heat affected zone is derived. Model predictions indicate that the initial grain size has little effect on the final one, and the grain growth depends mainly on heat input and peak temperature as well as growth activation energy and exponent. With the use of the model, the width of coarse grained heat affected zone (CGHAZ) for a thick plate is predicted.
关键词:
welding
,
high heat input
,
microstructure
中国腐蚀与防护学报
N。1Atmospheric Corrosivlty for Steels………………………………………………… .LIANG Caideng HO[I i。-tat（6）Caustic Stress Corrosion Cr。king of Alloy 800 Part 2.The Effect of Thiosul执e……………………………………… KONG De-sheng YANG Wu ZHAO Guo-zheng HUANG De.ltL。ZHANG Yu。。he CHEN She。g-bac（13）SERS slid E16CttOCh6iniC81 Stlldy Of Illhibit1Oli M6ch＆tllsth Of ThlollY68 Oil ITOll ID H....
关键词:
Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions with Materials and Atoms
A static Monte Carlo simulation program has been used to study the influence of primary and secondary knock-on atoms on the angular distribution and the fractionation, for zero-fluence sputtering of Mo-92-Mo-100. At 10 keV Xe ion energy, calculations show that significant depth-dependent momentum asymmetry exists in the near-surface region, as in Refs. (L.P. Zheng, R.S. Li, M.Y.LI, Nucl. Instr, and Meth. B 100 (1995) 490; L.P. Zheng, M.Y. Li, Nucl. Instr. and Meth. B 114(1996) 28). The calculations also show that at the polar emission angle range between 0 degrees and 90 degrees the probabilities of the sputtered primary knock-on atoms for Mo-92 and Mo-100 are small (6.1% for Mo-92 and 6.6% for Mo-100), especially, between 0 degrees and 30 degrees they are very small (2.5% for Mo-92 and 2.8% for Mo-100). At 0.1 keV Ar ion energy, the calculations show that partial momentum flux ratios, for the primary and the secondary knock-on atoms, deviate far from one, through marker plane 1 (about an atomic layer distance from the surface). (C) 1998 Elsevier Science B.V. All rights reserved.
关键词:
mo-92-mo-100;targets
李红
,
孙克
,
李艳萍
,
石毅
,
郭金花
,
卢志超
金属功能材料
提出了采用推杆式热膨胀仪测试非晶合金薄带热膨胀特性的新方法.分析了Fe80Si9B11非晶薄带的热膨胀曲特性和非晶合金晶化过程.根据R.G.Zheng理论分析了结构弛豫中自由体积比变化,发现自由体积比曲线出现双峰.结合晶化前发生相分离的理论分析了这种变化的原因.分析表明:铁基非晶Fe80Si9B11晶化过程中先形成α-Fe(Si)相,再析出Fe3B、二次α-Fe(Si)相.晶化前先发生相分离,自由体积比增大,然后析出结晶相α-Fe(Si),自由体积比降低.随温度升高,B偏聚,自由体积比增大,随后析出Fe3B、二次α-Fe(Si)相,自由体积比降低.
关键词:
铁基非晶薄带
,
热膨胀系数
,
自由体积比
,
结构弛豫
