ZHU Min LI Guobin YANG Dazhi Dilian University of Technology
,
Dalian
,
China Dept.of Materials Engineering
,
Dalian University of Technology
,
Dalian 116024
,
China
金属学报(英文版)
The transmission electron microscopy has been used to investigate the fine structure variation of 18R martensite under deformation in a polycrvstalline CuZnAl shape memory alloys.It has been found that the strain is gabined by the reorientation of martensite variants in the ini- tial deformation stage.In addition to the result of optical microscopy studies,however,the reorientation is often incomplete and the interfaces among the prior variants still remain.A lot of twins will appear in martensite under enormous deformation,and the twin plane is(001) phane of martensite lattice.The dislocations has also been observed in some regions.In this case,the martensite will lose its thermoelasticitv and the shape memory effect will be damaged.
关键词:
fine structure
,
null
,
null
,
null
Xiujian Chou
材料科学技术（英文）
Ba1-xSrxTiO3 ceramics, doped with B2O3-Li2O glasses have been fabricated via a traditional ceramic process at a low sintering temperature of 900 °C using liquid-phase sintering aids. The microstructures and dielectric properties of B2O3-Li2O glasses doped Ba1-xSrxTiO3 ceramics have been investigated systematically. The temperature dependence dielectric constant and loss reveals that B2O3-Li2O glasses doped Ba1-xSrxTiO3 ceramics have diffusion phase transformation characteristics. For 5 wt% B2O3-Li2O glasses doped Ba0:55Sr0:45TiO3 composites, the tunability is 15.4% under a dcpplied electric field of 30 kV/cm at 10 kHz; the dielectric loss can be controlled about 0.0025; and the Q value is 286. These composite ceramics sintered at low temperature with suitable dielectric constant, low dielectric loss, relatively high tunability and high Q value are promising candidates for multilayer low-temperature co-fired ceramics (LTCC) and potential microwave tunable devices applications.
关键词:
Sintering
D.Eylon
,
S.R.Seagle
材料科学技术（英文）
The state of Ti research, development and industry is reviewed in this article. The fifty-year anniversary of Ti technology commercialization in the USA provides an opportunity for a historical perspective. Incorporation of "information-age" tools into alloy development, processing, and production invigorates the technology. Consolidation, diversification and globalization have been transforming the Ti industry in the recent years.
关键词:
QIAO Lijie LIU Rui XIAO Jimei University of Science and Technology Beijing
,
Beijing
,
China
金属学报(英文版)
The effects of stress components on nucleation sites and propagation directions of stress cor- rosion cracks in brass were investigated with specimens under mode Ⅱ and mode Ⅲ loadings. The results indicated that under mode Ⅱ loading,stress corrosion cracks nucleated on the site with maximum normal stress component and propagated along the plane perpendieular to the maximum normal stress,under mode Ⅲ loading,the stress corrosion crack was not evident on the 45°plane due to the general corrosion in aqueous solution with high NH_4OH concentra- tion,while stress corroded in aqueous solution with low NH_4OH concentration, numerous cracks with spacings of 10—150μm were found on the 45°plane with maximum normal stress and no stress corrosion cracks was observed on the plane with maximum shear stress.
关键词:
stress corrosion cracking
,
null
,
null
,
null
Yanwu Xu
材料科学技术（英文）
Using mathematical plasticity theories, universal formability (UF) technology has been developed and applied in the automotive stamping engineering and production. As a formability analysis tool, this technology is the major methodology for the development of stamping expert system (solution provider) for (a) product design and feasibility analysis, (b) material automatic selection using nomograms, (c) draw die design using pre-models, and (d) UF and robustness analysis of die performance in finite element analysis (FEA) environment.
关键词:
G.Montay
,
A.Cherouat
,
A.Nussair
,
J.Lu
材料科学技术（英文）
Residual stress in coatings is the result of individual particle stress. Their effects may be either beneficial or detrimental, depending upon the magnitude, sign and distribution of the stresses with respect to the external load. Tensile stress which exceeds the elastic limit causes cracking in surface coatings or at the interface between the substrate and the coat. Compressive stress, in general, has a beneficial effect on the fatigue life, crack propagation, coating adhesion and on the durability of the top coat during service. Compressive residual stresses can increase the number of cycles before crack initiation begins through a mean stress effect. Temperature gradients which occur during solidification and subsequent cooling are the principal mode of internal stresses generation. Some parameters influence the residual stress field of both the coating and the substrate. Substrate nature, spraying temperature, thickness of the coat layer, substrate preparation (grit blasting conditions), and velocity of the splats are in the relation with the quality of the coating. In this work, we will describe the role playing by the ceramics coating elaboration on the residual stress gradient in depth of the component. The incremental hole drilling technique has been developed to determine the residual stress gradient in depth of the coat and substrate which must be used with particularly conditions. This new technology has been employed on zirconia, alumina and tungsten carbide plasma sprayed coating.
关键词:
Coating
,
null
,
null
,
null
