Dianyu GENG
,
Zhidong ZHANG
,
Baozhi CUI
,
Zhijun GUO
,
Wei LIU
,
Xinguo ZHAO
材料科学技术（英文）
The structure and magnetic properties of SmyFe(100-1.5)yC(0.5y)(y=8 similar to 20) alloys prepared by mechanical alloying (MA) from Sm, Fe and graphite have been investigated systematically. In order to improve hard magnetic properties of the alloys prepared by mechanical alloying, a new method consisting of re-milling and re-annealing was developed. After being re-milled and re-annealed, the Curie temperature T-C of the Sm-Fe-C alloys changes. The T-C of 2:17 phase increases, whereas the T-C of 2:14:1 phase decreases. After being re-annealed at low temperatures, the grain sizes of hard phases are smaller than those in the alloys annealed at high temperatures. The effects of Co or Ti substitution for Fe are studied.
关键词:
Jian ZHANG
,
Xiaokai SUN
,
Wei LIU
,
Baozhi CUI
,
Xinguo ZHAO
,
Zhidong ZHANG
材料科学技术（英文）
Structure and magnetic properties of the nanocomposite magnets prepared by mechanical alloying procedure with composition 55 wt pct Nd (Fe0.92B0.08)5.5+45 wt pct a-Fe, 55 wt pct Nd(Fe0.8-xCo0.12Nbx B0.08)5.5+45 wt pct a-Fe (x=0.00, 0.01, 0.03) and 55 wt pct (Nd0.9Dy0.1) (Fe0.77Co0.12Nb0.03B0.08)5.5+45 wt pct a-Fe were studied. It was found that substitution of Co for Fe could significantly improve the permanent magnetic properties of the nanocomposite magnets and typically, the maximum magnetic energy product was increased from 104.8 kJ/m3 (13.1 MGOe) to 141.6 kJ/m3 (17.7 MGOe). In contrast to the case of conventional nominally single-phase magnets, the addition of Nb results in promoting the growth of a-Fe grain and is thus unfavorable for the improvement of permanent magnetic properties of the nanocomposites. Although the addition of Dy can increase the coercivity of the magnets, the increase of magnetic anisotropy of hard phase leads to decrease of the critical grain size of soft phase. Additionally it causes the difficulty of preparing the nanocomposites because it is more difficult to control the grain size of soft phase to meet the requirement of appropriate exchange coupling between hard and soft grains.
关键词:
Zhijun GUO
,
Zhidong ZHANG
,
Xinguo ZHAO
,
Bowen WANG
,
Dianyu GENG
材料科学技术（英文）
Structure and magnetostriction of Dy1-xPrxFe2 (0 less than or equal to x less than or equal to 0.5), Dy0.6Pr0.4(Fe1-yTy)(2) (0 less than or equal to y less than or equal to 0.6), and Tb1-zPrz(Fe0.4Co0.6)(2) (0 less than or equal to z less than or equal to 1.0) alloys (T=Co, Ni) have been investigated. It is found that the matrix of the alloys Dy1-xPrxFe2 is a single phase (Dy, Pr)Fe-2 with MgCu2-type structure and the second phase is (Dy, Pr)Fe-3 when x less than or equal to 0.2. The amount of (Dy, Pr)Fe-3 phase increases with increasing Pr content and becomes the main phase when x=0.4. The matrix of Dy1-xPrxFe2 is found to be the (Dy, Pr)(2)Fe-17 phase with Th2Zn17-type structure when x=0.5. It is found that the amount of the cubic Laves phase (Dy, Pr)(Fe, Co)(2) in the Dy0.6Pr0.4(Fe1-yCoy)(2) increases with increasing Co concentration when 0 less than or equal to y less than or equal to 0.6. The substitution of Ni for Fe is nearly not favorable for the formation of the cubic Laves phase (Dy, Pr)(Fe, Ni)(2) in (Dy1-xPrx)Fe-2. The matrix of (Tb1-zPrz)(Fe0.4Co0.6)(2) is a (Tb, Pr)(Fe, Co)(2) phase with the MgCu2-type cubic Laves structure and a second phase of small amount is (Tb, Pr)(Fe, Co)(3) phase when z less than or equal to 0.2, z=0.5 and 1.0. When 0.2
关键词:
