欢迎登录材料期刊网

材料期刊网

高级检索

  • 论文(3)
  • 图书()
  • 专利()
  • 新闻()

Modeling of γ→α Transformation Temperature Ar3 for High-Nb Pipeline Steel During Cooling Process

LIU Yun-fei , PENG Yan , LIU Hong-min , ZHANG Jian

钢铁研究学报(英文版)

According to the research on the deformation resistance and the ferrite transformation behavior of X80 pipeline steel by using Gleeble-3500 thermal simulator, a mathematical model of the α-phase start transformation temperature for high-Nb pipeline steel was established, based on the transformation kinetics and thermodynamics. The influence of deformation and cooling rate as well as Nb content on the α-phase starting temperature was thoroughly investigated. The results given by the model were in good agreement with the experimental results, which showed that the model could predict the α-phase starting temperature for high-Nb pipeline steel during cooling process.

关键词: high-Nb pipeline steel , hot deformation , deformation resistance , cooling rate , ferrite transformation temperature

超低碳13Cr-5Ni-2Mo马氏体不锈钢热变形行为及本构关系

张威,闫东娜,邹德宁,刘环,韩英,范光伟

钢铁

利用Gleeble-3800热模拟试验机对超低碳13Cr-5Ni-2Mo马氏体不锈钢进行单道次高温压缩试验,研究其在900~1 200 ℃、0.1~50 s-1条件下的热变形行为,并讨论了不同变形条件下的微观组织演变规律;基于Sellars双曲正弦模型构建了超低碳13Cr-5Ni-2Mo 马氏体不锈钢的高温流变应力本构方程。研究结果表明,变形温度越高、应变速率越低,则流变应力越小,峰值应变也越小,微观组织由动态回复型向动态再结晶型转变,并且晶粒逐渐长大、粗化。在高温区变形,随着应变速率的升高,动态再结晶晶粒明显细化。所建立的本构方程具有较高的精确度,能反映超低碳13Cr-5Ni-2Mo 马氏体不锈钢的高温变形力学行为,可为热加工数值模拟研究提供参考。

关键词: 超低碳 , carbon martensitic stainless steel , hot deformation , constitutive equation

高应变率下00Cr23Ni4N双相不锈钢的热变形行为

张威 , 李国平

钢铁

采用Gleeble-3800热力学模拟试验机对00Cr23Ni4N双相不锈钢进行了高温压缩试验,研究了其在900~1150℃、5~50s-1条件下的热变形行为,并利用Sellars双曲正弦模型建立了峰值流变应力与Zener-Hollomon(Z参数)之间的关系。研究结果表明,00Cr23Ni4N双相不锈钢的高温流变应力随变形温度的升高、应变速率的减小显著降低;在变形温度为1100~1150℃,材料均表现出良好的热加工性能;通过回归分析,00Cr23Ni4N双相不锈钢的应力指数为2.6,热变形激活能为263.4kJ/mol,Z参数能较好地描述该钢种的流变行为。

关键词: 00Cr23Ni4N , duplex stainless steel , hot compression , flow stress , hot deformation , activation energy

出版年份

刊物分类

相关作者

相关热词