Lixing HUO
,
Furong CHEN
,
Yufeng ZHANG
,
Li ZHANG
,
Fangjun LIU
,
Gang CHEN
材料科学技术（英文）
A three-dimensional finite-element model (FEM) used for calculating electron beam (EB) welding temperature and stresses fields of thin plates of BT20 titanium has been developed in which the nonlinear thermophysical and thermo-mechanical properties of the material has been considered. The welding temperature field, the distributions of residual stresses in as-welded (AW) and electron beam local post-weld heat treatment (EBLPWHT) conditions have been successfully simulated. The results show that: (1) In the weld center, the maximum magnitude of residual tensile stresses of BT20 thin plates of Ti alloy is equal to 60%~70% of its yield strength δs. (2) The residual tensile stresses in weld center can be even decreased after EBLPWHT and the longitudinal tensile stresses are decreased about 50% compared to joints in AW conditions. (3) The numerical calculating results of residual stresses by using FEM are basically in agreement with the experimental results. Combined with numerical calculating results, the effects of electron beam welding and EBLPWHT on the distribution of welding residual stresses in thin plates of BT20 have been analyzed in detail.
关键词:
Electron beam local heat treatment
,
null
,
null
,
null
柯于斌
,
段辉平
,
梁晓波
,
张建伟
宇航材料工艺
doi:10.3969/j.issn.1007-2330.2009.06.017
利用透射电子显微镜和能谱,研究电子束焊接过程中Ti_2AlNb基合金显微组织演变过程以及焊缝区组成、焊后热处理对接头显微组织的影响.结果表明:焊接过程中焊缝区Al元素损失较为严重,这有利于B_2相的形成而不利于O相的形成,使得接头焊缝区主要由B_2和α_2两相组成;在随后的热处理过程中,焊缝区的B_2相转变为β相和板条状的O相,使焊缝区由α_2、O和β相组成.
关键词:
Ti_2AlNb基合金
,
电子束焊接
,
显微组织
