Mengqi Yan
材料科学技术（英文）
The understanding of Goss texture in Hi-B electrical steels possesses significant industrial and academic value, thus attracts worldwide attention. The prevailing models for sharp Goss texture formation during secondary recrystallization are CSL (coincident site lattice) boundary theory and HE (high energy) boundary theory. These theories stress the key factor of preferred growth and the difference between them only lies in the specific selection manner. This work examined the texture gradient in primarily recrystallized sheet and demonstrated its possible influence on the formation of secondary grains, and then determined the microtexture during different stages of secondary recrystallization using EBSD (electron back-scattered diffraction) technique, finally analyzed a special type of secondary grains with near Brass orientation, which were detected in the later stage of secondary recrystallization, and discussed its origin and effect in terms of surface energy effect. The results indicate that texture gradient in primarily recrystallized sheet will lead to a multi-stage formation of Goss texture, namely, early stage of secondary grains with various orientations in subsurface region, intermediate stage of preferred growth of Goss grains into center layer and re-grow back to the surface and the final stage of Goss grain growth by swallowing slowly the island grains with the help of H2 atmosphere.
关键词:
Hi-B electrical steel
钱浩
,
杨平
,
孙信
,
毛卫民
,
汪玲玲
,
金文旭
,
蒋奇武
材料热处理学报
采用＂中断法＂确定了Hi-B取向硅钢二次再结晶动力学,即二次再结晶的开始温度和温度区间,对比分析了Hi-B取向硅钢与CGO取向硅钢二次再结晶动力学的差异及原因;考察了不同换气温度对二次再结晶晶粒尺寸和磁性能的影响。结果表明,在氮氢混合气氛下,Hi-B硅钢二次再结晶过程比CGO硅钢滞后,发生在1040℃至1120℃之间,其动力学曲线近似为S型;二次再结晶退火时,随着换气温度的升高,最终晶粒尺寸增大,磁感和铁损增加。
关键词:
Hi-B钢
,
二次再结晶
,
换气温度
