欢迎登录材料期刊网

材料期刊网

高级检索

检索条件:关键词=Mg alloy  

  • 论文(53)

Microstructures and Mechanical Properties of Rapidly Solidified Mg-Al-Zn-MM Alloys

Yeon-Wook Kim

材料科学技术(英文)

Mg-Al-Zn-MM (misch metal) alloy powders were manufactured by inert gas atomization and the characteristics of alloy powders were investigated. In spite of the low fluidity and easy oxidation of the magnesium melt, the spherical powder was made successfully with the improved three piece nozzle system...

关键词: Mg alloy , null , null , null

Microstructure and Mechanical Properties of Mg-3Al-1Zn-xRE Alloys

Wei Qiu

材料科学技术(英文)

In this work, the influence of element RE on the microstructures and mechanical properties of the hot extuded Mg-3Al-1Zn-xRE alloys (with element RE content of 0.05, 0.1 and 0.2 wt pct) has been investigated and compared. It was found that RE can bring about precipitations phase that is ide...

关键词: Mg alloy

Ageing Behavior of Mg-xAl-Zn with Variation of Al Content

Byoungho Kim , Jongjin Jeon , Yeongdo Park , Yongho Park , Ikmin Park

材料科学技术(英文)

The ageing behavior of Mg-xAl-Zn alloys with a variation of Al contents (x=3, 5, 7, 9 and 11 wt pct) were investigated. Solid solution treatment and artificial ageing were carried out at 693 and 493 K, respectively. After the solid solution treatment, β-Mg17Al12 was resolved to the α-Mg matrix in th...

关键词: Ageing , null , null

镁合金塑性变形机理研究进展

刘庆

金属学报 doi:DOI: 10.3724/SP.J.1037.2010.00446

简述了具有密排六方(hcp)结构镁合金材料各种可能的滑移和孪生系统及其临界切变应力; 以镁合金塑性变形机理为主线, 分别对单晶和多晶镁合金材料塑性变形行为及微观机理的影响规律, 轧制、挤压及不同严重塑性变形模式下镁合金织构的形成机理, 形变镁合金材料退火过程中回复与再结晶及镁合金材料在热变形过程中的...

关键词: 镁合金 , plastic deformation , mechanical twinning , dislocation slip , texture , anisotropy , recrystallization

磷酸一氢钠对AZ91镁合金的缓蚀作用

高继峰 , 刘德绪 , 龚金海 , 王勇

腐蚀与防护

采用电化学阻抗谱(EIS)、动电位极化曲线、失重法和扫描电镜研究了磷酸一氢钠对AZ91镁合金在0.05%NaCl溶液中的缓蚀行为,及其与部分有机物的协同作用.结果表明,因为磷酸一氢根离子与镁离子反应产生了镁盐沉淀物,磷酸一氢钠对镁合金有一定的缓蚀作用;有机磺酸盐、羧酸盐或氨酸盐单独使用时,这些缓蚀剂...

关键词: 缓蚀剂 , 镁合金 , 磷酸一氢钠 , 电化学方法

稀土Er对ZK21镁合金组织的影响

张静 , 袁付庆 , 豆雨辰 , 张旭峰 , 汤爱涛

材料热处理学报

研究了添加稀土Er(0~4.0%)对半连续铸造ZK21合金铸态和均匀化态组织的影响。结果表明,稀土Er的添加可有效细化铸态组织,加入2.0%的Er使合金的平均晶粒尺寸由94μm细化至62μm,减小了34%。Er在均匀化态合金中部分固溶于基体中,部分与Mg、Zn元素形成热稳定Mg-Zn-Er三元化合物...

关键词: 镁合金 , 稀土 , 均匀化 , 显微组织 , 硬度

  • 首页
  • 上一页
  • 1
  • 2
  • 3
  • 4
  • 5
  • 下一页
  • 末页
  • 共6页
  • 跳转 Go

出版年份

    刊物分类

      相关作者

        相关热词