Daoxin LIU
,
Xiaodong ZHU
,
Bin TANG
,
Jiawen HE
材料科学技术（英文）
Ion beam enhanced deposition (IBED) was employed to increase the fretting fatigue resistance of Ti6Al4V. CrN and TiN hard coatings were applied on the base material and shot peening was combined with the hard coatings to study the duplex effect on fretting fatigue resistance. The IBED coatings exhibited a good bonding strength. They did not spall off even after shot peening. However, an optimum composition of CrN showed better fretting fatigue resistance than that of TiN with the same processing parameters.
关键词:
Fretting fatigue
,
null
,
null
,
null
姜涛
,
刘建平
,
于洋
,
高玉魁
,
张兵
宇航材料工艺
对喷丸前后DZ4高温合金旋转弯曲高周疲劳断口的断裂特征进行了观察.结果表明,室温和高温(820℃)时,未喷丸的DZ4合金高周疲劳裂纹均萌生于试样表面以及与表面相连的铸造缺陷或碳化物处.Kt=1时,疲劳断口为点源,源区存在滑移平面和滑移台阶；随着应力集中水平的升高(Kt=2,Kt=3),疲劳断口向多源和线源发展,源区滑移面变小甚至消失；随着温度的升高,断口源区滑移特征明显.喷丸后,疲劳裂纹源内移,裂纹萌生于试样次表面的晶体内部或铸造缺陷处.带缺口试样裂纹源减少,起源区域缩小,出现明显的主、次疲劳源.实验证明,喷丸可降低DZ4合金表面和缺口敏感性,对裂纹萌生有抑制作用,可提高材料的疲劳性能,随着温度升高,喷丸的强化作用逐渐减弱,但在820℃仍有强化作用.
关键词:
DZ4高温合金
,
喷丸
,
旋转弯曲
,
高周疲劳
,
断裂特征
