欢迎登录材料期刊网

材料期刊网

高级检索

检索条件:关键词=austenite  

  • 论文(48)

球墨外围奥氏体壳的形成过程与对石墨畸变的影响

周继扬 , W.SCHMITZ , S.ENGLER

金属学报

本文用彩色金相法研究了球墨外围奥氏体壳的生长过程及奥氏体对石墨畸变的影响。结果表明,球墨外围的奥氏体壳不是连续的奥氏体层,而是由若干个楔形晶体组成。由于球墨外围奥氏体成核的有利条件不同;故在不同位置先后成核并生长。之后,互相接触形成一个壳。 经电子探针分析,沟槽中正偏析元素及低熔点金属含量高,因而沟...

关键词: 球墨 , color metellography , austenite , deterioration of graphite

Rietveld精修定量分析钢中残余奥氏体

王锐 , 周敬 , 李文竹 , 黄磊

物理测试

利用Rietveld 全谱精修方法进行钢铁材料中的残余奥氏体的测定。该方法测定钢中残余奥氏体具有操作简单和结果重现性好的优点。

关键词: X射线衍射 , austenite , texture , quantitative phase analysis , full pattern fitting

AISI304不锈钢中δ→γ相变的原位观察

梁高飞 , 朱丽业 , 王成全 , P.Nolli , 吴建春 , 于艳 , 方园

金属学报

利用Confocal激光扫描显微镜原位观察了AISI304不锈钢冷却加热过程中高温铁素体(δ)→奥氏体(γ)相变的过程及其特征。结果表明,γ相优先在δ晶界处形成;冷却速率影响γ相的生长形态,典型形态分为多边形、块状、圆形、树枝状、板状、网状、以及葫芦状等七种;“游离”γ枝晶发生粗化,并可能和周围的γ...

关键词: AISI304不锈钢 , δ-ferrite , austenite , phase transformation , in-situ observation

双相不锈钢在含硝酸体系的优选腐蚀行为研究

付燕

中国腐蚀与防护学报

研究了双相不锈钢在氧化性的HNO3+HCl、HNO3+NaCl+FeCl3 3种体系中两相的腐蚀差异。通过动电位极化实验,用SEM和EDS对表面形貌进行观测和两相的鉴别,发现奥氏体相是优先腐蚀的相,在HNO3+HCl和HNO3+NaCl中随着Cl-浓度的增加,两相的优选腐蚀更加明显,但在HNO3+F...

关键词: 双相不锈钢 , ferrite , austenite , selective dissolution , nitric acid

Research on Retained Austenite for Advanced Aluminum-containing Hot-rolled TRIP Steel

Yu CHEN

材料科学技术(英文)

A new type of hot-rolled transformation induced plasticity (TRIP) steel with 2.3%Al was developed to replace conventional Si-bearing TRIP steel to improve surface quality of the steel sheet. The relationship between retained austenite volume fraction and hot-rolling processing was researched by Glee...

关键词: Aluminum , retained , austenite , coiling , temp

BEHAVIOURS OF AUSTEN1TE UNDER IMPACT ABRASION

WANG Huaming Institute of Metal Research , Academia Sinica , Shenyang , ChinaZHANG Qing Central Iron and Steel Research Institute , Ministry of Metallurgical Industry , Beijing , ChinaSHAO Hesheng Beijing Graduate School , China University of Mining and Technology , Beijing , China Institute of Metal Research , Academia Sinica , Shenyang 110015 , China

金属学报(英文版)

The role of austenite in impact-abrasion process was studied on the basis of the impact-abrasion test results of a newly developed austenite-bainitic ferrite dual-phase abrasion-resistant steel with high strength,high toughness and high strain-hardening ability. It is found that the morphology,distr...

关键词: austenite , null , null , null

Fe-Mn-C系合金1000℃固溶处理组织图的研究

李绍雄 , 何镇明 , 赵宇光 , 赵玉谦 , 施忠良

金属学报

本文根据76个成分点的试验结果及文献[1]中的有关结论,建立了含有不同稳定性大小奥氏体区的较为完整的Fe-Mn-C系合金1000℃固溶处理后的组织图,并对各类锰钢的化学成分范围及组织变化规律进行了分析与讨论。工业用锰钢的成分和组织可依据该组织图进行合理选择。

关键词: Fe-Mn-C系合金 , Fe-Mn-C alloy , austenite

奥氏体在冲击磨料磨损过程中的作用

王华明 , 张清 , 邵荷生

金属学报

本文在新型高强韧性奥氏体-贝氏铁素体高碳低合金钢冲击磨料磨损试验结果基础上,讨论了奥氏体在冲击磨损过程中的作用。发现只有在具有一定韧性的高强度基体组织中一定量高度分散分布的稳定性较高的奥氏体,才对抗冲击磨损有利,而组织中大量粗大的机械稳定性较低的奥氏体,尤其是作为连续基体存在时,对冲击磨损抗力极为有...

关键词: 奥氏体 , wear resistance , austenite

STUDY ON AUSTENITE-FERRITE TRANSFORMATION WITHIN CRITICAL TEMPERATURE REGION

金属学报(英文版)

Thispaperdealswiththephasetransformationofaustenitetoferritewithinthecriticaltemperatureregion(betweenAc1andAc3).Theresultsshowthatthevolumefractionoftransformationofferriteformedisothermallyfromausteniteismainlyvariedwiththeaustenitizingtemperature.Thehighertheaustenitizingtemperature,themorevolume...

关键词: :critical temperature region , null , null , null , null

Modeling of Austenite Grain Size in Low-Alloy Steel Weld Metal

A.G. Huang , Y.S. Wang , Z.Y. Li , J.G. Xiong , Q. Hu

金属学报(英文版)

The size of austenite grain has significant e®ects on components and proportions of various ferrites in low-alloy steel weld metal. Therefore, it is important to determine the size of austenite grain in the weld metal. In this paper, a model based upon the carbon diffusion rate is developed for comp...

关键词: low-alloy steel , null , null , null

  • 首页
  • 上一页
  • 1
  • 2
  • 3
  • 4
  • 5
  • 下一页
  • 末页
  • 共5页
  • 跳转 Go