李建国
,
毛协民
,
傅恒志
金属学报
本文利用新研制的ZMLMC定向凝固装置,研究了Ni-5wt-%Cu合金快速定向凝固条件下由树枝状生长转变为胞状生长及其过渡过程的凝固界面结构和微观组织。实验结果表明:在枝-胞转变点附近,随生长速率的增大,侧向分枝由发达逐渐萎缩,最终消失;同时一次枝晶间距减小,发生枝-胞转变时,糊状区长度急骤缩短。快...
关键词:
胞状生长
,
interface morphology
,
primary spacing
,
rapid solidification
,
dendrite-to-cell transition
W.Q
,
Zhang
,
L.Xiao
金属学报(英文版)
A numerical model has been established to calculate the primary spacing of cellular or dendritic structure with fluid flow considered。 The computing results show that the primary spacing depends on the growing velocity, the temperature gradient on the interface and fluid flow. There is a critical gr...
关键词:
primary spacing
,
null
,
null
单博炜
,
黄卫东
,
林鑫
,
魏雷
金属学报
发展了一个元胞自动机模型来模拟定向凝固中枝晶阵列的一次间距选择. 在模型中通过采用简化的
生长动力学降低了计算复杂度, 并给出了判断系统达到稳定态的方法. 基于两种一次间距的调整机制-侧
枝不稳定性和湮没不稳定性, 分别采取两套不同的数值实验方法: 一套是种晶数目固定, 采用台阶变速方式;
另一套是...
关键词:
元胞自动机
,
dendrite
,
primary spacing
彭东剑
,
林鑫
,
张云鹏
,
郭雄
,
王猛
,
黄卫东
金属学报
doi:10.3724/SP.J.1037.2012.00556
运用基于界面追踪法的数值自洽模型研究了界面能各向异性对定向凝固枝晶生长的影响.模拟结果表明,对于给定的凝固条件,对应不同的一次间距Péclect数范围,存在2个不同的界面形态解区间,其中较小的间距Péclect数解区间对应的界面形态类似胞状晶,较大的间距Péclect数解区间对应的界面形态类似枝状晶...
关键词:
界面能各向异性
,
定向凝固
,
枝晶尖端半径
,
一次间距
LI Jianguo MAO Xiemin FU Hengzhi National Laboratory of solidification Technology
,
Northwestern Polytechnical University
,
Xi'an
,
China Lecturer.Faculty No.403
,
Northwestern Polytechnical University
,
Xi'an 710072
,
China
金属学报(英文版)
The interface morphologies and microstruetures of the directionally solidified Ni-5wt-% Cu alloy during dendrite-to-cell transition at high growth rates have been investigated with a newly developed apparatus for unidirectional solidification with the temperature gradient at the solid/liquid interfa...
关键词:
cellular growth
,
null
,
null
,
null
,
null