LI Chang-sheng
,
YANG Hua
,
WANG Yan-fang
,
YU Yong-mei
钢铁研究学报(英文版)
The hot rolled strip of Fe-3Si steel was experimentally produced by thin slab casting and rolling (TSCR) process in the laboratory. The texture evolution rule was investigated during hot rolling and cold rolling. The texture distribution of cold rolled strips with four kinds of cold rolling reduction schedules was observed through X-ray diffraction method, and the orientation density variation of 1/16 layer, 1/8 layer, 1/4 layer, and 1/2 layer in thickness was analyzed. The cold rolled texture of steel A with four kinds of cold rolling reduction schedules was mainly composed of α and γ fibers. Cold rolling reduction ratio of 70% was more beneficial for obtaining more γ fibers. The γ fiber texture orientation density of {111}<011> and {111}<1 12> was the largest on the 1/8 layer and 1/4 layer and the least on the 1/16 layer and 1/2 layer for steel B. The texture orientation density of {001}-{223}<110> in the α fibers for steel C was increased, but the texture orientation density of {332}-{110}<110> was low.
关键词:
silicon steel
,
texture
,
hot rolling
,
cold rolling
,
thin slab
,
continuous casting
,
direct rolling
YANG Guang-hui
,
CAO Jian-guo
,
ZHANG Jie
,
SONG Ping
,
YAN Tan-li
,
RAO Ke-feng
钢铁研究学报(英文版)
In order to solve the difficult profile and flatness control problem of wide non-oriented electrical steel sheets, the factors such as the relationship between strip crown control and strip width, the relationship between the maximum wearing value of work roll and the number of a rolling campaign and the wear contour change of work roll were analyzed on the basis of industrial test. Through analyzing the rolling process characteristics of non-oriented electrical steel sheets, the ASR (asymmetry self-compensating work rolls) shape control technology and its roll shifting strategy of the wider non-oriented electrical steel sheets was proposed and developed. When the technology was applied, the number of the wide non-oriented electrical steel (23 mm×1280 mm) in one rolling campaign rose from 40 coils of the trial production to 70 coils of the industrial production, the ratio of the measured strip crown less than 45 μm was increased from 500% to 949%, and the ratio of the measured strip crown more than 60 μm was decreased from 200% to 07%.
关键词:
silicon steel
,
shape control
,
hot rolling
,
roll contour
